Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:physics/0610027 · New Journal of Physics

Transport of launched cold atoms with a laser guide and pulsed magnetic fields

Matthew J Pritchard, Aidan S Arnold, Simon L Cornish, David W Hallwood, Chris V S Pleasant, Ifan G. Hughes

Published Dec 7, 2006• 10 citations
arXivHTMLPDF

Abstract

We propose the novel combination of a laser guide and magnetic lens to transport a cold atomic cloud. We have modelled the loading and guiding of a launched cloud of cold atoms with the optical dipole force. We discuss the optimum strategy for loading typically 30% of the atoms from a MOT and guiding them vertically through 22cm. However, although the atoms are tightly confined transversely, thermal expansion in the propagation direction still results in a density loss of two orders of magnitude. By combining the laser guide with a single impulse from a magnetic lens we show one can actually increase the density of the guided atoms by a factor of 10.

DOI
10.1088/1367-2630/8/12/309

Related papers

Transport of launched cold atoms with a laser guide and pulsed magnetic fields

Pritchard, M J, Arnold, A S, Cornish, S L +3 more

We propose the novel combination of a laser guide and magnetic lens to transport a cold atomic cloud. We have modelled the loading and guiding of a launched cloud of cold atoms with the optical dipole force. We discuss the optimum strategy for loading typically 30% of the atoms from a MOT and guiding them vertically through 22cm. However, although the atoms are tightly confined transversely, thermal expansion in the propagation direction still results in a density loss of two orders of magnitude. By combining the laser guide with a single impulse from a magnetic lens we show one can actually increase the density of the guided atoms by a factor of 10.

•Oct 4, 2006•3 citations

Manipulation of ultracold atoms using magnetic and optical fields

Matthew J Pritchard

The loading and guiding of a launched cloud of cold atoms with the optical dipole force are theoretically and numerically modelled. A far-off resonance trap can be realised using a high power Gaussian mode laser, red-detuned with respect to the principal atomic resonance (Rb 5s-5p). The optimum strategy for loading typically 30% of the atoms from a Magneto optical trap and guiding them vertically through 22 cm is discussed. During the transport the radial size of the cloud is confined to a few hundred microns, whereas the unconfined axial size grows to be approximately 1 cm. It is proposed that the cloud can be focused in three dimensions at the apex of the motion by using a single magnetic impulse to achieve axial focusing. A theoretical study of six current-carrying coil and bar arrangements that generate magnetic lenses is made. An investigation of focusing aberrations show that, for typical experimental parameters, the widely used assumption of a purely harmonic lens is often inaccurate. A new focusing regime is discussed: isotropic 3D focusing of atoms with a single magnetic lens. The baseball lens offers the best possibility for isotropically focusing a cloud of weak-field-seeking atoms in 3D.A pair of magnetic lens pulses can also be used to create a 3D focus (the alternate-gradient method). The two possible pulse sequences are discussed and it is found that they are ideal for loading both 'pancake' and 'sausage’ shaped magnetic/optical microtraps. It is shown that focusing aberrations are considerably smaller for double-impulse magnetic lenses compared to single- impulse magnetic lenses. The thesis concludes by describing the steps taken towards creating a 3D quasi- electrostatic lattice for 85Ilb， using a CՕշ laser. The resulting lattice of trapped atoms will have a low decoherence, and with resolvable lattice sites, it therefore provides a useful system to implement quantum information processing.

•Jan 1, 2006•3 citations

An optically guided atomic fountain

Hilary Jane Davies

This thesis describes the development of a laser-cooling experiment aimed at efficient transfer of cold atoms over a short distance, for loading into a conservative atom trap. We detail the construction of a 3D magneto-optical trap (MOT) and perform characterisation measurements to optimise the number and temperature of the cold atoms. The atoms are launched vertically in a fountain from the MOT using a 'moving molasses' technique and a red-detuned far-off-resonant laser beam is used to guide them into an UHV chamber. Loading into the guiding beam is optimised with respect to the beam and MOT parameters. We demonstrate a maximum loading of 20% and guiding over a distance of more than 10 cm without loss of atoms. The atoms are delivered to the UHV chamber in a cloud with a transverse dimension of order 200 #mu#m. We discuss the extension to continuous operation of the guided atomic fountain. The 3D MOT is replaced by a funnel with 2D trapping and 3D cooling which continuously extracts the cold atoms using moving molasses. A comparison between the flux of guided atoms obtained in a pulsed fashion from the 3D MOT and continuously from the funnel indicate that the pulsed case is a factor of ten more efficient. The difference is due to inferior loading from the funnel. The optically guided fountain is used to load an optical dipole trap in the UHV chamber, using an 'optical trap door'. No additional cooling is required. The dynamics of the atoms in the optical dipole trap are studied. We discuss multiple loading of a conservative trap with the view of accumulating more atoms than can be obtained in a MOT. (author)

•Jan 1, 1999•0 citations

An atomic fountain guided by a far-off resonance light beam

H. Davies, K. Szymaniec, Charles S. Adams

Summary form only given. We report optical guiding of cold atoms in a free-propagating far-detuned laser beam. The atoms are initially cooled and collected in a magneto-optical trap (MOT), which typically contains over 10/sup 8/ atoms in a cigar shaped cloud with an aspect ratio of 4. Approximately 20% of these atoms are loaded into a far-detuned optical dipole beam aligned vertically through the MOT. The number loaded is limited primarily by geometrical overlap. Both guided and unguided atoms are launched with a velocity of 1.25 m/s and a temperature of 20 /spl mu/K. The guided beam is focused through a 1 mm aperture, 6 cm above the MOT, which connects the vapour cell to a UHV chamber. Atoms can be launched within the guide without heating and guided into a UHV chamber with 100% efficiency. In continuous operation, the scheme allows extraction of atoms from a MOT without loss of phase space density.

Quantum Electronics and Laser Science Conference•Jan 20, 2003•0 citations

Injection of a cold atomic beam into a magnetic guide

Christian F. Roos, P. Cren, Thierry Lahaye +2 more

We report the continuous or pulsed loading of a slow and cold atomic beam into a magnetic guide. In order to optimize the transfer into the guide, we have studied two coupling schemes. The first one is based on an auxiliary two-dimensional MOT that confines the atoms transversally before they enter the guide. However, for low atomic velocities, the atoms are strongly heated in the longitudinal direction. This limitation does not occur in the second coupling scheme which relies on magnetic confinement in the transfer zone. For this purpose, we have constructed a miniature magnetic guide located between the atomic source and the long magnetic guide. The latter scheme allows to inject atoms with velocities down to 70 cm/s into the guide.

arXiv:cond-mat/0212147•Dec 6, 2002•5 citations

Laser cooling of a magnetically guided ultra cold atom beam

Anoush Aghajani-Talesh

This thesis examines two complimentary methods for the laser cooling of a magnetically guided ultra-cold atom beam. If combined, these methods could serve as a starting point for high-through put and possibly even continuous production of Bose-Einstein condensates. First, a mechanism is outlined to harvest ultra cold atoms from a magnetically guided atom beam into an optical dipole trap. A continuous loading scheme is described that dissipates the directed kinetic energy of a captured atom via deceleration by a magnetic potential barrier followed by optical pumping to the energetically lowest Zeeman sublevel. The application of this scheme to the transfer of ultra cold chromium atoms from a magnetically guided atom beam into a deep optical dipole trap is investigated via numerical simulations of the loading process. Based on the results of the theoretical studies the feasibility and the efficiency of our loading scheme, including the realisation of a suitable magnetic field configuration, are analysed. Second, experiments were conducted on the transverse laser cooling of a magnetically guided beam of ultra cold chromium atoms. Radial compression by a tapering of the guide is employed to adiabatically heat the beam. Inside the tapered section heat is extracted from the atom beam by a two-dimensional optical molasses perpendicular to it, resulting in a significant increase of atomic phase space density. A magnetic offset field is applied to prevent optical pumping to untrapped states. Our results demonstrate that by a suitable choice of the magnetic offset field, the cooling beam intensity and detuning, atom losses and longitudinal heating can be avoided. Final temperatures below 65 µK have been achieved, corresponding to an increase of phase space density in the guided beam by more than a factor of 30.

•Jan 1, 2014•9 citations
We propose the novel combination of a laser guide and magnetic lens to transport a cold atomic cloud. We have modelled the loading and guiding of a launched cloud of cold atoms with the optical dipole force. We discuss the optimum strategy for loading typically 30% of the atoms from a MOT and guiding them vertically through 22cm. However, although the atoms are tightly confined transversely, thermal expansion in the propagation direction still results in a density loss of two orders of magnitude. By combining the laser guide with a single impulse from a magnetic lens we show one can actually increase the density of the guided atoms by a factor of 10.
We propose the novel combination of a laser guide and magnetic lens to transport a cold atomic cloud. We have modelled the loading and guiding of a launched cloud of cold atoms with the optical dipole force. We discuss the optimum strategy for loading typically 30% of the atoms from a MOT and guiding them vertically through 22cm. However, although the atoms are tightly confined transversely, thermal expansion in the propagation direction still results in a density loss of two orders of magnitude. By combining the laser guide with a single impulse from a magnetic lens we show one can actually increase the density of the guided atoms by a factor of 10.
The loading and guiding of a launched cloud of cold atoms with the optical dipole force are theoretically and numerically modelled. A far-off resonance trap can be realised using a high power Gaussian mode laser, red-detuned with respect to the principal atomic resonance (Rb 5s-5p). The optimum strategy for loading typically 30% of the atoms from a Magneto optical trap and guiding them vertically through 22 cm is discussed. During the transport the radial size of the cloud is confined to a few hundred microns, whereas the unconfined axial size grows to be approximately 1 cm. It is proposed that the cloud can be focused in three dimensions at the apex of the motion by using a single magnetic impulse to achieve axial focusing. A theoretical study of six current-carrying coil and bar arrangements that generate magnetic lenses is made. An investigation of focusing aberrations show that, for typical experimental parameters, the widely used assumption of a purely harmonic lens is often inaccurate. A new focusing regime is discussed: isotropic 3D focusing of atoms with a single magnetic lens. The baseball lens offers the best possibility for isotropically focusing a cloud of weak-field-seeking atoms in 3D.A pair of magnetic lens pulses can also be used to create a 3D focus (the alternate-gradient method). The two possible pulse sequences are discussed and it is found that they are ideal for loading both 'pancake' and 'sausage’ shaped magnetic/optical microtraps. It is shown that focusing aberrations are considerably smaller for double-impulse magnetic lenses compared to single- impulse magnetic lenses. The thesis concludes by describing the steps taken towards creating a 3D quasi- electrostatic lattice for 85Ilb， using a CՕշ laser. The resulting lattice of trapped atoms will have a low decoherence, and with resolvable lattice sites, it therefore provides a useful system to implement quantum information processing.
This thesis describes the development of a laser-cooling experiment aimed at efficient transfer of cold atoms over a short distance, for loading into a conservative atom trap. We detail the construction of a 3D magneto-optical trap (MOT) and perform characterisation measurements to optimise the number and temperature of the cold atoms. The atoms are launched vertically in a fountain from the MOT using a 'moving molasses' technique and a red-detuned far-off-resonant laser beam is used to guide them into an UHV chamber. Loading into the guiding beam is optimised with respect to the beam and MOT parameters. We demonstrate a maximum loading of 20% and guiding over a distance of more than 10 cm without loss of atoms. The atoms are delivered to the UHV chamber in a cloud with a transverse dimension of order 200 #mu#m. We discuss the extension to continuous operation of the guided atomic fountain. The 3D MOT is replaced by a funnel with 2D trapping and 3D cooling which continuously extracts the cold atoms using moving molasses. A comparison between the flux of guided atoms obtained in a pulsed fashion from the 3D MOT and continuously from the funnel indicate that the pulsed case is a factor of ten more efficient. The difference is due to inferior loading from the funnel. The optically guided fountain is used to load an optical dipole trap in the UHV chamber, using an 'optical trap door'. No additional cooling is required. The dynamics of the atoms in the optical dipole trap are studied. We discuss multiple loading of a conservative trap with the view of accumulating more atoms than can be obtained in a MOT. (author)
Summary form only given. We report optical guiding of cold atoms in a free-propagating far-detuned laser beam. The atoms are initially cooled and collected in a magneto-optical trap (MOT), which typically contains over 10/sup 8/ atoms in a cigar shaped cloud with an aspect ratio of 4. Approximately 20% of these atoms are loaded into a far-detuned optical dipole beam aligned vertically through the MOT. The number loaded is limited primarily by geometrical overlap. Both guided and unguided atoms are launched with a velocity of 1.25 m/s and a temperature of 20 /spl mu/K. The guided beam is focused through a 1 mm aperture, 6 cm above the MOT, which connects the vapour cell to a UHV chamber. Atoms can be launched within the guide without heating and guided into a UHV chamber with 100% efficiency. In continuous operation, the scheme allows extraction of atoms from a MOT without loss of phase space density.
We report the continuous or pulsed loading of a slow and cold atomic beam into a magnetic guide. In order to optimize the transfer into the guide, we have studied two coupling schemes. The first one is based on an auxiliary two-dimensional MOT that confines the atoms transversally before they enter the guide. However, for low atomic velocities, the atoms are strongly heated in the longitudinal direction. This limitation does not occur in the second coupling scheme which relies on magnetic confinement in the transfer zone. For this purpose, we have constructed a miniature magnetic guide located between the atomic source and the long magnetic guide. The latter scheme allows to inject atoms with velocities down to 70 cm/s into the guide.
This thesis examines two complimentary methods for the laser cooling of a magnetically guided ultra-cold atom beam. If combined, these methods could serve as a starting point for high-through put and possibly even continuous production of Bose-Einstein condensates. First, a mechanism is outlined to harvest ultra cold atoms from a magnetically guided atom beam into an optical dipole trap. A continuous loading scheme is described that dissipates the directed kinetic energy of a captured atom via deceleration by a magnetic potential barrier followed by optical pumping to the energetically lowest Zeeman sublevel. The application of this scheme to the transfer of ultra cold chromium atoms from a magnetically guided atom beam into a deep optical dipole trap is investigated via numerical simulations of the loading process. Based on the results of the theoretical studies the feasibility and the efficiency of our loading scheme, including the realisation of a suitable magnetic field configuration, are analysed. Second, experiments were conducted on the transverse laser cooling of a magnetically guided beam of ultra cold chromium atoms. Radial compression by a tapering of the guide is employed to adiabatically heat the beam. Inside the tapered section heat is extracted from the atom beam by a two-dimensional optical molasses perpendicular to it, resulting in a significant increase of atomic phase space density. A magnetic offset field is applied to prevent optical pumping to untrapped states. Our results demonstrate that by a suitable choice of the magnetic offset field, the cooling beam intensity and detuning, atom losses and longitudinal heating can be avoided. Final temperatures below 65 µK have been achieved, corresponding to an increase of phase space density in the guided beam by more than a factor of 30.