We report on a method of light-shift engineering where an auxiliary laser is used to tune the atomic transition frequency. We show that the technique provides enhanced loading of laser cooled 85 Rb and 87 Rb atoms into deep optical traps. Furthermore, by using a blue-detuned optical molasses, light-shift engineering offers remarkable spatial selectivity in the loading of an optical lattice.
We report on a method of light-shift engineering where an auxiliary laser is used to tune the atomic transition frequency. We show that the technique provides enhanced loading of laser cooled 85 Rb and 87 Rb atoms into deep optical traps. Furthermore, by using a blue-detuned optical molasses, light-shift engineering offers remarkable spatial selectivity in the loading of an optical lattice.
Microscopically controlled neutral atoms in optical tweezers and lattices have led to exciting advances in the study of quantum information and quantum many-body systems. The light shifts of atomic levels from the trapping potential in these systems can result in detrimental effects such as fluctuating dipole force heating, inhomogeneous detunings, and inhibition of laser cooling, which limits the atomic species that can be manipulated. In particular, these light shifts can be large enough to prevent loading into optical tweezers directly from a magneto-optical trap. We implement a general solution to these limitations by loading, as well as cooling and imaging the atoms with temporally alternating beams, and present an analysis of the role of heating and required cooling for single atom tweezer loading. Because this technique does not depend on any specific spectral properties, it should enable the optical tweezer platform to be extended to nearly any atomic or molecular species that can be laser cooled and optically trapped.
This thesis reports on the design and construction of, and results from, an optical-dipole trapping apparatus developed to confine ultracold rubidium atoms in a conservative, large period, optical-dipole trap. An ultra-high vacuum system was designed and constructed to create a very low- background pressure. A new technique of viewport construction was developed, allowing for the fabrication of economical, high-quality windows for transmission of mid-infra-red laser radiation. The construction of a magneto-optical trap (MOT) and an optical molasses, and the subsequent characterisation, are discussed. A theory for the ac-Stark shift of atoms in a far-detuned laser field was developed. The nature of the scalar and tensorial light-shifts of the ground and first excited states of alkali atoms - the 5s(^2)S1/2 and 5p(^2)P3/2 states of Rb - has been examined. The effect of the differential light-shifts between these states on the operation of efficient laser cooling is discussed. A quasi-electrostatic dipole trap (QUEST) was formed from 50 W of CO2 laser power (٢ = 10.6 μm), focussed to <100 μm. The transfer of ultra-cold atoms from the MOT and optical molasses to the QUEST have been examined. Single beam and standing wave geometries of the QUEST have been implemented, with lifetimes of many seconds. The theory for the ac-Stark effect due to a single laser field has been further developed to consider orthogonally polarised fields with independent wavelengths. The use of an auxiliary laser field, a Nd:YAG laser at λ = 1.064 μm, to enhance the number and density of atoms loaded into the QUEST has been proposed and realised.
We report a way to overcome heating due to the reabsorption of scattered light when relatively many atoms are laser cooled at high density. A sample of $8\ifmmode\times\else\texttimes\fi{}{10}^{7}\mathrm{Cs}$ atoms, with $6\ifmmode\times\else\texttimes\fi{}{10}^{11}{\mathrm{atoms}\mathrm{}\mathrm{cm}}^{\mathrm{\ensuremath{-}}3},$ is loaded into a deep far-detuned one-dimensional optical lattice, which acts as a large volume three-dimensional (3D) trap. Polarization gradient cooling with a separate set of cooling beams is found to work well in this trap, populating the trap's vibrational ground state with more than half the atoms. After cooling, the lattice is shut off adiabatically, leaving a still dense sample at 1.2 \ensuremath{\mu}K. We propose and demonstrate a generalization to a 3D lattice, which will allow many more atoms to be loaded into conservative light traps, and can greatly increase the initial phase-space density for loading magnetic traps.
An innovative and practical scheme of building far-detuned optical lattice for 87Rb atoms is proposed.The disposals of aligning the lattice beams,tuning the lattice frequency and controlling the tapered amplifier for output are described in detail.Alignment of optical lattices is quite difficult in principle,for several beams are required to hit the same atomic cloud.For the relatively near-detuned one-and two-dimensional lattices,the coarse alignment is accomplished by tuning the lattice laser onto resonance with the magnetic-optic trap(MOT) frequency,and then blowing away the MOT in real time.A more precision alignment is implemented at the end of the MOT loading,the atoms are first pumped into the lower hyperfine level by turning off the repumping for some time;then,the pulsed lattice beams are turned on for a short time at some reasonably large detuning.Finally,a fluorescent image of the MOT is taken without repumping,in order to detect only those atoms which are repumped by the lattice laser.For the purpose of controlling the detuning of the lattice easily and accurately,a home-made grating wavemeter with a resolution better than 1 GHz is used.This way allows the laser to be locked at any frequency by using a software PID and is experimentally simple to implement.The intensity of the lattice is controlled directly by pulsing the current through the tapered amplifier using a function generator and a laser diode driver.This technique has already been demonstrated before by Prof.M.Kasevich's group at Stanford. Our experiment starts with a MOT capturing approximately 4107 atoms in 200 ms.The lattice loading is overlap with the end of polarization gradient cooling(PGC),after that,the molasses laser beams are extinguished, and the adiabatic expansion is accomplished in the same time by a decrease in the lattice light intensity according to release function.On the basis of MOT and PGC,the dependences of atomic loading on such parameters as the intensity and frequency detuning of optical lattice are investigated experimentally.The vibration frequency is measured by intentionally modulating the trap intensity.Experimental results show that the lattice structure facilitates the cooling with the temperature of atoms cloud being reduced to 1/3 compared with free space polarization gradient cooling.The system design,experimental results and conclusions are of definite significance and can serve as a fine reference for other kinds of lattices designs or alkali atomic plans.
We report continuous loading of 87Rb atoms in a magneto-optical trap (MOT) at narrow linewidth, 420-nm 5S1/2, $F=2\ensuremath{\rightarrow}6{P}_{3/2}$, F=3 blue transition (blue MOT). Continuous loading of the blue MOT is achieved by superimposing the blue laser beam inside a hollow core of infrared (IR) laser beam driving the broad 5S1/2, $F=2\ensuremath{\rightarrow}5{P}_{3/2}$, F=3 transition at 780 nm. We typically load $\ensuremath{\sim}{10}^{8}$ atoms in the blue MOT in 2.5 s. We characterize the continuous loading of the blue MOT with various parameters such as magnetic-field gradient, detuning, power and diameter of the blue MOT beam, and diameter of the hollow core (spot) inside the IR MOT beam. We observe that the blue laser beam should overfill the spot of the IR laser beam. This is because the blue laser cools the atoms to a lower temperature even in the presence of the broad IR laser, i.e., in the overlapped region, and hence helps in loading. To support the experimental result, we also present the theoretical framework for cooling atoms in the presence of two lasers driving two different transitions simultaneously. This method of continuous loading of the blue MOT can be useful to produce a continuous atomic beam of cold Rb atoms.
Experiments are performed on loading cold atoms into a far-off resonance optical dipole trap that is spatially separated from the laser-cooling region. The atoms are delivered using a far-off resonant optical dipole guide and enter the trap through a switchable blue-detuned light sheet or ``trap door.'' This scheme provides a means to transfer atoms from a dissipative to a non-dissipative trap without a significant loss of phase-space density. We study the dynamics of atoms within the trap and measure their lifetime. Preliminary results on multiple loading are presented. As the technique does not rely on near-resonant light, the atom number limit characteristic of laser-cooling experiments can, in principle, be exceeded.