© 2026 Aqora Quantum S.A.S.

Terms Privacy Legal Notice

arXiv:cond-mat/0611143 · Physical Review B

Simultaneous readout of two charge qubits

Jian Li, Göran Johansson

Published Feb 9, 2007• 8 citations

Abstract

We consider a system of two solid state charge qubits, coupled to a single readout device, consisting of a single-electron transistor (SET). The conductance of each tunnel junction is influenced by its neighboring qubit, and thus the current through the transistor is determined by the qubits' state. The full counting statistics of the electrons passing the transistor is calculated, and we discuss qubit dephasing, as well as the quantum efficiency of the readout. The current measurement is then compared to readout using real-time detection of the SET island's charge state. For the latter method we show that the quantum efficiency is always unity. Comparing the two methods a simple geometrical interpretation of the quantum efficiency of the current measurement appears. Finally, we note that full quantum efficiency in some cases can be achieved measuring the average charge of the SET island, in addition to the average current.

DOI: 10.1103/physrevb.75.085312

Related papers

Measurement of two-qubit states by a two-island single-electron transistor

Tetsufumi Tanamoto, Xuedong Hu

We solve the master equations of two charged qubits measured by a single-electron transistor (SET) consisting of two islands. We show that in the sequential tunneling regime the SET current can be used for reading out results of quantum calculations and providing evidences of two-qubit entanglement, especially when the interaction between the two qubits is relatively weak compared to qubit-SET coupling.

arXiv:cond-mat/0309648•Physical Review B•Mar 2, 2004•21 citations

Correlated charge detection for readout of a solid-state quantum computer

Tilo M. Buehler, D. J. Reilly, R. Brenner +3 more

The single-electron transistor (SET) is a prime candidate for reading out the final state of a qubit in a solid-state quantum computer. Such a measurement requires the detection of subelectron charge motion in the presence of random charging events. We present a detection scheme where the signals from two SETs are cross-correlated to suppress unwanted artifacts due to charge noise. This technique is demonstrated by using the two SETs to detect the charge state of two coupled metal dots, thereby simulating charge transfer and readout in a two-qubit system. These measurements indicate that for comparable buried dopant semiconductor architectures, the minimum measurement time required to distinguish between the two charge states is of the order of 10 ns.

arXiv:cond-mat/0207597•Applied Physics Letters•Jan 23, 2003•42 citations

Measurement of Two-Qubit States using a Two-Island Single Electron Transistor

Tetsufumi Tanamoto, Shinobu Fujita, Xuedong Hu

Department of Physics, University at Buﬀalo, SUNY, Buﬀalo, NY 14260-1500(Dated: May 20, 2011)We solve the master equations of two charged qubits measured by a single-electron transistor(SET) consisted of two islands. We show that in the sequential tunneling regime the SET currentcan be used for reading out results of quantum calculations and providing evidences of two-qubitentanglement, especially when the interaction between the two qubits is weak.

International Conference on Solid State Devices and Materials (SSDM)•Sep 18, 2004•0 citations

Josephson-Junction Qubits

Yuriy Makhlin, Gerd Schön, Alexander Shnirman

Among the potential physical implementations of quantum bits (qubits) solid state devices appear most promising for large scale applications and integration in electronic circuits. Devices based on low-capacitance Josephson junctions exploit the coherence of the superconducting state, combined with the possibility to control individual charges by Coulomb blockade effects. The logical states in these systems differ by one Cooper-pair charge. Single- and two-bit operations can be performed by applying a sequence of gate voltages. The phase coherence time is sufficiently long to allow a series of these steps. If, in addition, the strength of the Josephson coupling is controlled (e.g. by currents in SQUID loops) the system is ideal for quantum computation. Recent experiments by Nakamura et al. show the feasibility of this approach. In addition to the manipulations of qubits the resulting quantum state has to be read out. This quantum measurement process can be accomplished by coupling a single-electron transistor (SET) capacitively to the qubit. We investigate the process by analyzing the time-evolution of the density matrix of the coupled system. The measurement process is characterized by three time scales: the dephasing time, which is fast when a dissipative current flows in the SET, a longer ‘measurement time’ needed to read out the signal, and a third, even longer ‘mixing time’, characterizing measurement induced transitions which destroy the information about the initial quantum state. The noise spectrum of the current in the SET displays these time scales and allows their direct observation.

Fortschritte der Physik•Sep 1, 2000•9 citations

Single-shot measurement of the Josephson charge qubit

O. V. Astafiev, Yu. A. Pashkin, Tsuyoshi Yamamoto +2 more

We demonstrate single-shot readout of quantum states of the Josephson charge qubit. The quantum bits are transformed into and stored as classical bits (charge quanta) in a dynamic memory cell---a superconducting island. The transformation of state $|1〉$ (differing form state $|0〉$ by an extra Cooper pair) is a result of a controllable quasiparticle tunneling to the island. The charge is then detected by a conventional single-electron transistor, electrostatically decoupled from the qubit. We study relaxation dynamics in the system and obtain the readout efficiency of 87% and 93% for $|1〉$ and $|0〉$ states, respectively.

arXiv:cond-mat/0402619•Physical Review B•May 12, 2004•81 citations

Radio-Frequency Single-Electron Transistor as Readout Device for Qubits: Charge Sensitivity and Backaction

A. Aassime, Göran Johansson, Goran P. Wendin +2 more

We study the radio-frequency single-electron transistor (rf-SET) as a readout device for charge qubits. We measure the charge sensitivity of an rf-SET to be 6.3microe/sqrt[Hz] and evaluate the backaction of the rf-SET on a single Cooper-pair box. This allows us to compare the needed measurement time with the mixing time of the qubit imposed by the measurement. We find that the mixing time can be substantially longer than the measurement time, which would allow readout of the state of the qubit in a single shot measurement.

Physical Review Letters•Apr 9, 2001•218 citations

We consider a system of two solid state charge qubits, coupled to a single readout device, consisting of a single-electron transistor (SET). The conductance of each tunnel junction is influenced by its neighboring qubit, and thus the current through the transistor is determined by the qubits' state. The full counting statistics of the electrons passing the transistor is calculated, and we discuss qubit dephasing, as well as the quantum efficiency of the readout. The current measurement is then compared to readout using real-time detection of the SET island's charge state. For the latter method we show that the quantum efficiency is always unity. Comparing the two methods a simple geometrical interpretation of the quantum efficiency of the current measurement appears. Finally, we note that full quantum efficiency in some cases can be achieved measuring the average charge of the SET island, in addition to the average current.

The single-electron transistor (SET) is a prime candidate for reading out the final state of a qubit in a solid-state quantum computer. Such a measurement requires the detection of subelectron charge motion in the presence of random charging events. We present a detection scheme where the signals from two SETs are cross-correlated to suppress unwanted artifacts due to charge noise. This technique is demonstrated by using the two SETs to detect the charge state of two coupled metal dots, thereby simulating charge transfer and readout in a two-qubit system. These measurements indicate that for comparable buried dopant semiconductor architectures, the minimum measurement time required to distinguish between the two charge states is of the order of 10 ns.

Among the potential physical implementations of quantum bits (qubits) solid state devices appear most promising for large scale applications and integration in electronic circuits. Devices based on low-capacitance Josephson junctions exploit the coherence of the superconducting state, combined with the possibility to control individual charges by Coulomb blockade effects. The logical states in these systems differ by one Cooper-pair charge. Single- and two-bit operations can be performed by applying a sequence of gate voltages. The phase coherence time is sufficiently long to allow a series of these steps. If, in addition, the strength of the Josephson coupling is controlled (e.g. by currents in SQUID loops) the system is ideal for quantum computation. Recent experiments by Nakamura et al. show the feasibility of this approach. In addition to the manipulations of qubits the resulting quantum state has to be read out. This quantum measurement process can be accomplished by coupling a single-electron transistor (SET) capacitively to the qubit. We investigate the process by analyzing the time-evolution of the density matrix of the coupled system. The measurement process is characterized by three time scales: the dephasing time, which is fast when a dissipative current flows in the SET, a longer ‘measurement time’ needed to read out the signal, and a third, even longer ‘mixing time’, characterizing measurement induced transitions which destroy the information about the initial quantum state. The noise spectrum of the current in the SET displays these time scales and allows their direct observation.

We demonstrate single-shot readout of quantum states of the Josephson charge qubit. The quantum bits are transformed into and stored as classical bits (charge quanta) in a dynamic memory cell---a superconducting island. The transformation of state

|1〉

(differing form state

|0〉

by an extra Cooper pair) is a result of a controllable quasiparticle tunneling to the island. The charge is then detected by a conventional single-electron transistor, electrostatically decoupled from the qubit. We study relaxation dynamics in the system and obtain the readout efficiency of 87% and 93% for

|1〉

and

|0〉

states, respectively.

We study the radio-frequency single-electron transistor (rf-SET) as a readout device for charge qubits. We measure the charge sensitivity of an rf-SET to be 6.3microe/sqrt[Hz] and evaluate the backaction of the rf-SET on a single Cooper-pair box. This allows us to compare the needed measurement time with the mixing time of the qubit imposed by the measurement. We find that the mixing time can be substantially longer than the measurement time, which would allow readout of the state of the qubit in a single shot measurement.