A flux qubit can have a relatively long decoherence time at the degeneracy point, but away from this point the decoherence time is greatly reduced by dephasing. This limits the practical applications of flux qubits. Here we propose a new qubit design modified from the commonly used flux qubit by introducing an additional capacitor shunted in parallel to the smaller Josephson junction (JJ) in the loop. Our results show that the effects of noise can be considerably suppressed, particularly away from the degeneracy point, by both reducing the coupling energy of the JJ and increasing the shunt capacitance. This shunt capacitance provides a novel way to improve the qubit.A flux qubit can have a relatively long decoherence time at the degeneracy point, but away from this point the decoherence time is greatly reduced by dephasing. This limits the practical applications of flux qubits. Here we propose a new qubit design modified from the commonly used flux qubit by introducing an additional capacitor shunted in parallel to the smaller Josephson junction (JJ) in the loop. Our results show that the effects of noise can be considerably suppressed, particularly away from the degeneracy point, by both reducing the coupling energy of the JJ and increasing the shunt capacitance. This shunt capacitance provides a novel way to improve the qubit.

OSA Workshop on Entanglement and Quantum DecoherenceJan 1, 200823 citations

The C-shunt Flux Qubit: A New Generation of Superconducting Flux Qubit

Jeffrey Birenbaum

While quantum computation has the potential to revolutionize the scientific community, to date no architecture has been developed which offers the necessary combination of high coherence times and massive scalability. Superconducting flux qubits satisfy the second requirement well but to date useful devices are limited to coherence times of typically only a few &mus. In this dissertation we examine the possibilities of improving the coherence performance of the flux qubit to the levels required for fault-tolerant quantum computation. We find that coherence times for many devices are limited by photon-induced quasiparticles and mitigation of these quasiparticles increases coherence times by more than a factor of two. Beyond this, however, we find little improvement in flux qubit performance compared to prior results. Despite improved fabrication techniques and varied device designs we find flux qubit coherence times are still typically below 5 &mus. Furthermore, wide device-to-device variations are observed which prevent effective scaling of the flux qubit to quantum information circuits.Based on the proposal by You, et al. we develop of a capacitively-shunted version of the flux qubit called the C-shunt flux qubit. With the addition of a capacitive shunt across the small junction of the flux qubit we are able to reduce the amplitude sensitivity to both charge and flux noise by more than a factor of three. The result is a predicted ten-fold enhancement in the coherence times compared to the unshunted flux qubit. At the same time we preserve much of the anharmonicity of the flux qubit resulting in a device with coherence times comparable to modern transmons but with a factor of four better anharmonicity and more flexible coupling configurations.By using a high-quality MBE aluminum shunt process on an annealed sapphire substrate coupled with a more conventional electron-beam-evaporated aluminum Josephson junction process we fabricate hybrid C-shunt flux qubits. We also incorporate a new bridgeless junction technique which offers more robust and repeatable fabrication processing. This technique enables improved accuracy of the junction sizing, a trait which will become essential as we move to multi-qubit experiments. T1 and T2 times for these C-shunt devices reach in excess of 40 &mus at degeneracy, achieving the predicted ten-fold improvement based on the reduced noise sensitivity. At the same time we see decreased device-to-device variation with typical T1 times exceeding 20&ndash25 &mus at all bias points. Combined with the high anharmonicity and standard planar fabrication techniques these coherence times make the C-shunt flux qubit a competitive candidate for fault-tolerant quantum computation.While quantum computation has the potential to revolutionize the scientific community, to date no architecture has been developed which offers the necessary combination of high coherence times and massive scalability. Superconducting flux qubits satisfy the second requirement well but to date useful devices are limited to coherence times of typically only a few &mus. In this dissertation we examine the possibilities of improving the coherence performance of the flux qubit to the levels required for fault-tolerant quantum computation. We find that coherence times for many devices are limited by photon-induced quasiparticles and mitigation of these quasiparticles increases coherence times by more than a factor of two. Beyond this, however, we find little improvement in flux qubit performance compared to prior results. Despite improved fabrication techniques and varied device designs we find flux qubit coherence times are still typically below 5 &mus. Furthermore, wide device-to-device variations are observed which prevent effective scaling of the flux qubit to quantum information circuits.Based on the proposal by You, et al. we develop of a capacitively-shunted version of the flux qubit called the C-shunt flux qubit. With the addition of a capacitive shunt across the small junction of the flux qubit we are able to reduce the amplitude sensitivity to both charge and flux noise by more than a factor of three. The result is a predicted ten-fold enhancement in the coherence times compared to the unshunted flux qubit. At the same time we preserve much of the anharmonicity of the flux qubit resulting in a device with coherence times comparable to modern transmons but with a factor of four better anharmonicity and more flexible coupling configurations.By using a high-quality MBE aluminum shunt process on an annealed sapphire substrate coupled with a more conventional electron-beam-evaporated aluminum Josephson junction process we fabricate hybrid C-shunt flux qubits. We also incorporate a new bridgeless junction technique which offers more robust and repeatable fabrication processing. This technique enables improved accuracy of the junction sizing, a trait which will become essential as we move to multi-qubit experiments. T1 and T2 times for these C-shunt devices reach in excess of 40 &mus at degeneracy, achieving the predicted ten-fold improvement based on the reduced noise sensitivity. At the same time we see decreased device-to-device variation with typical T1 times exceeding 20&ndash25 &mus at all bias points. Combined with the high anharmonicity and standard planar fabrication techniques these coherence times make the C-shunt flux qubit a competitive candidate for fault-tolerant quantum computation.

Jan 1, 20143 citations

The road to long coherence time superconducting quantum bits

Dongning Zheng, Yirong Jin

Superconducting quantum computing is a solid state quantum computing technology based on Josephson junction circuits. It becomes one of the most promising candidates for realizing practical quantum computer/simulator, because of its scalability, easy to coupling and control, compatibility to semiconductor technologies, etc. As the complicated electromagnetic environment in solid state metal and insulator, superconducting quantum bits (qubits) suffered from shot coherence time since its early development. In this review, we described some recently developed superconducting qubit structures, including Transmon/Xmon, Fluxonium and C-shunt flux qubit. Although these new qubit structures have very different circuit parameters and energy scales, they all find their way to effectively suppress environmental noises. As a result, their coherence time were improved significantly. Transmon, a transmission-line shunted plasma oscillation qubit, was now among the most popular structures for building a multi-qubit superconducting quantum circuit. It introduced a relatively large shunt capacitor to remarkably reduce the charge dispersion. Although the non-linearity is also decreased, by operating in a properly chosen EJ/Ec, transmon can greatly reduce the charge noise while only sacrificing a small amount of non-linearity. Xmon can be considered as a modified version of transmon. It is designed and optimized for multi-qubit operation and measurement with separate X/Y and Z control lines for each qubit, and a readout bus (a transmission line or a low-Q bandpass filter) for simultaneous readout of all the qubits. Fluxonium provide another solution for suppressing the charge noise in Cooper-pair box (CPB). It introduces a large shunt inductance to filter low-frequency offset charge in the small capacitor of the phase-slip junction (the small junction). To keep the qubit operating in the charge region, the shunt inductor should be large enough to keep the impedance larger than the superconducting impedance quantum RQ~1 kΩ. As a result, the inductance can only be provided by a large series of Josephson junctions. Fluxonium keeps the advantage of high anharmonicity of CPB. In addition, it introduces another degree of freedom: external flux Φext. Quasiparticles (electrons or holes) tunneling at the small junction add coherently to produce a ″1+cosφ″ term. As a result, when Φext= Φ0/2, dissipation caused by quasiparticle tunneling is suppressed and the energy relaxation time (T1) increases drastically. C-shunt flux qubit (CSFQ) decreases α and EJ to suppress flux noise in the qubit. While the charge noise becomes the dominant noise source, a large shunt capacitor is added to suppress the charge noise, similar to that in a transmon qubit. It is worth to notice that in CSFQ, the α decreases to below but near 1/2. As a result, the double-well potential no longer exists. The energy structure become similar to transmon, with the anharmonicity be opposite. CSFQ can get a much improved coherence time, while its anharmonicity can be larger than that of transmon. Those new superconducting qubit structures provide different solutions to improve the coherence time. Although it looks much different in circuit models and parameters, they have ideas in common, and may act as guides to other novel designs with longer coherence time. We can summarize as below. (1) The qubit circuit should be free of small superconducting islands. Charge fluctuation in small islands is a major source of decoherence. As a result, increase the area of the islands, that is, increase the capacitance becomes a straight forward way to suppress the charge noise. In Fluxonium, the small junction is connected with a large series of large junctions that there is also no small islands in the whole loop. (2) Remove superconducting loops in the qubit circuit, or minimize the loop size and loop current to suppress flux noise. (3) Bias the phase difference of the small junction to π, where dissipation caused by quasiparticle tunneling can be suppressed coherently. (4) Decrease the coupling bandwidth of qubit to the environment. In a circuit-QED readout scheme, a high-Q readout resonator that dispersively coupled to the qubit protects the qubit from exposed to the electromagnetic environment of the readout circuit. A ″Purcell filter″ can also be added to suppress such decoherence further. In conclusion, we overviewed some qubit engineering techniques or ideas to improve the coherence time, which is a very important figure for building practical quantum computer/simulator. We hope that someone can combine and optimize these ideas, while interact with developments in materials and micro-fabrication technologies, to develop novel new generation superconducting qubit structures in the near future.Superconducting quantum computing is a solid state quantum computing technology based on Josephson junction circuits. It becomes one of the most promising candidates for realizing practical quantum computer/simulator, because of its scalability, easy to coupling and control, compatibility to semiconductor technologies, etc. As the complicated electromagnetic environment in solid state metal and insulator, superconducting quantum bits (qubits) suffered from shot coherence time since its early development. In this review, we described some recently developed superconducting qubit structures, including Transmon/Xmon, Fluxonium and C-shunt flux qubit. Although these new qubit structures have very different circuit parameters and energy scales, they all find their way to effectively suppress environmental noises. As a result, their coherence time were improved significantly. Transmon, a transmission-line shunted plasma oscillation qubit, was now among the most popular structures for building a multi-qubit superconducting quantum circuit. It introduced a relatively large shunt capacitor to remarkably reduce the charge dispersion. Although the non-linearity is also decreased, by operating in a properly chosen EJ/Ec, transmon can greatly reduce the charge noise while only sacrificing a small amount of non-linearity. Xmon can be considered as a modified version of transmon. It is designed and optimized for multi-qubit operation and measurement with separate X/Y and Z control lines for each qubit, and a readout bus (a transmission line or a low-Q bandpass filter) for simultaneous readout of all the qubits. Fluxonium provide another solution for suppressing the charge noise in Cooper-pair box (CPB). It introduces a large shunt inductance to filter low-frequency offset charge in the small capacitor of the phase-slip junction (the small junction). To keep the qubit operating in the charge region, the shunt inductor should be large enough to keep the impedance larger than the superconducting impedance quantum RQ~1 kΩ. As a result, the inductance can only be provided by a large series of Josephson junctions. Fluxonium keeps the advantage of high anharmonicity of CPB. In addition, it introduces another degree of freedom: external flux Φext. Quasiparticles (electrons or holes) tunneling at the small junction add coherently to produce a ″1+cosφ″ term. As a result, when Φext= Φ0/2, dissipation caused by quasiparticle tunneling is suppressed and the energy relaxation time (T1) increases drastically. C-shunt flux qubit (CSFQ) decreases α and EJ to suppress flux noise in the qubit. While the charge noise becomes the dominant noise source, a large shunt capacitor is added to suppress the charge noise, similar to that in a transmon qubit. It is worth to notice that in CSFQ, the α decreases to below but near 1/2. As a result, the double-well potential no longer exists. The energy structure become similar to transmon, with the anharmonicity be opposite. CSFQ can get a much improved coherence time, while its anharmonicity can be larger than that of transmon. Those new superconducting qubit structures provide different solutions to improve the coherence time. Although it looks much different in circuit models and parameters, they have ideas in common, and may act as guides to other novel designs with longer coherence time. We can summarize as below. (1) The qubit circuit should be free of small superconducting islands. Charge fluctuation in small islands is a major source of decoherence. As a result, increase the area of the islands, that is, increase the capacitance becomes a straight forward way to suppress the charge noise. In Fluxonium, the small junction is connected with a large series of large junctions that there is also no small islands in the whole loop. (2) Remove superconducting loops in the qubit circuit, or minimize the loop size and loop current to suppress flux noise. (3) Bias the phase difference of the small junction to π, where dissipation caused by quasiparticle tunneling can be suppressed coherently. (4) Decrease the coupling bandwidth of qubit to the environment. In a circuit-QED readout scheme, a high-Q readout resonator that dispersively coupled to the qubit protects the qubit from exposed to the electromagnetic environment of the readout circuit. A ″Purcell filter″ can also be added to suppress such decoherence further. In conclusion, we overviewed some qubit engineering techniques or ideas to improve the coherence time, which is a very important figure for building practical quantum computer/simulator. We hope that someone can combine and optimize these ideas, while interact with developments in materials and micro-fabrication technologies, to develop novel new generation superconducting qubit structures in the near future.

Chinese Science Bulletin (Chinese Version)Sep 27, 20172 citations

Josephson phase qubit with an optimal point

Norihito Kosugi, Shigemasa Matsuo, Toshiyuki Fujii +1 more

Current fluctuations in a Josephson phase qubit are considered to be a source of decoherence, especially for pure dephasing. One possible way of evading such decoherence is to employ an optimal operation point as used in flux and charge qubits, where the qubit is insensitive to the bias fluctuations. However, there is no optimal point in a phase qubit since qubit energy splitting becomes monotonically smaller with increasing the bias current. Here we propose a phase qubit with an optimal point by introducing qubit energy splitting that depends nonmonotonically on the current bias realized in capacitively coupled Josephson junctions. The effect of junction asymmetry on the optimal point is also investigated.Current fluctuations in a Josephson phase qubit are considered to be a source of decoherence, especially for pure dephasing. One possible way of evading such decoherence is to employ an optimal operation point as used in flux and charge qubits, where the qubit is insensitive to the bias fluctuations. However, there is no optimal point in a phase qubit since qubit energy splitting becomes monotonically smaller with increasing the bias current. Here we propose a phase qubit with an optimal point by introducing qubit energy splitting that depends nonmonotonically on the current bias realized in capacitively coupled Josephson junctions. The effect of junction asymmetry on the optimal point is also investigated.

Physical Review BJan 11, 20101 citation

Self-Shunted Superconducting Flux Qubit

Tokunoshin Uchida, Hiroki Kutsuma, Taro Yamashita

We proposed and theoretically investigated the self-shunted superconducting flux qubits (SSFQs) with relatively large Josephson junctions with the diameter over $\text{1}\; \mu \text{m}$ . Because of the large self-capacitance of several 10 fF in the junctions, the large shunt capacitor with dimensions of several 100$ \mu \text{m} $of the conventional capacitively shunted flux quantum bits (qubits) can be eliminated, resulting in significant reduction of the footprint. We systematically calculated the SSFQ performances, such as the anharmonicity, and investigated their dependences on the circuit parameters. As a result, it was shown that the SSFQs have the large anharmonicity of 400–2000 MHz for the reasonable parameters, such as the large junction area of around 1$ \mu \text{m}^{2} $and the small critical current density of around 10$ \text{A/cm}^{2}$. Furthermore, we derived and estimated the relative relaxation time of the SSFQs due to the charge and flux noises. As a result, we found that the high anharmonicity over 800 MHz could be achieved without degrading the relaxation time from that of the high-coherence flux qubits. The SSFQs offer the new choice of the highly scalable qubits, which achieve both the small footprint and high anharmonicity.We proposed and theoretically investigated the self-shunted superconducting flux qubits (SSFQs) with relatively large Josephson junctions with the diameter over$\text{1}\; \mu \text{m}$. Because of the large self-capacitance of several 10 fF in the junctions, the large shunt capacitor with dimensions of several 100$ \mu \text{m}$of the conventional capacitively shunted flux quantum bits (qubits) can be eliminated, resulting in significant reduction of the footprint. We systematically calculated the SSFQ performances, such as the anharmonicity, and investigated their dependences on the circuit parameters. As a result, it was shown that the SSFQs have the large anharmonicity of 400–2000 MHz for the reasonable parameters, such as the large junction area of around 1$ \mu \text{m}^{2}$and the small critical current density of around 10$\text{A/cm}^{2}$. Furthermore, we derived and estimated the relative relaxation time of the SSFQs due to the charge and flux noises. As a result, we found that the high anharmonicity over 800 MHz could be achieved without degrading the relaxation time from that of the high-coherence flux qubits. The SSFQs offer the new choice of the highly scalable qubits, which achieve both the small footprint and high anharmonicity.

IEEE Transactions on Applied SuperconductivityJun 27, 20241 citation

A long-lived capacitively shunted flux qubit embedded in a 3D cavity

Leonid V. Abdurakhimov, Imran Mahboob, Hiraku Toida +2 more

We report the experimental realization of a 3D capacitively shunt superconducting flux qubit with long coherence times. At the optimal flux bias point, the qubit demonstrates energy relaxation times in the range of 60–90 μs and a Hahn-echo coherence time of about 80 μs, which can be further improved by dynamical decoupling. Qubit energy relaxation can be attributed to quasiparticle tunneling and unwanted two-level-system defects, while qubit dephasing is caused by flux noise away from the optimal point. Our results show that 3D c-shunt flux qubits demonstrate improved performance over other types of flux qubits, which is advantageous for applications such as quantum magnetometry and spin sensing.We report the experimental realization of a 3D capacitively shunt superconducting flux qubit with long coherence times. At the optimal flux bias point, the qubit demonstrates energy relaxation times in the range of 60–90 μs and a Hahn-echo coherence time of about 80 μs, which can be further improved by dynamical decoupling. Qubit energy relaxation can be attributed to quasiparticle tunneling and unwanted two-level-system defects, while qubit dephasing is caused by flux noise away from the optimal point. Our results show that 3D c-shunt flux qubits demonstrate improved performance over other types of flux qubits, which is advantageous for applications such as quantum magnetometry and spin sensing.

arXiv:1911.04635Applied Physics LettersDec 23, 201943 citations

We proposed and theoretically investigated the self-shunted superconducting flux qubits (SSFQs) with relatively large Josephson junctions with the diameter over

\text{1}\; \mu \text{m}

. Because of the large self-capacitance of several 10 fF in the junctions, the large shunt capacitor with dimensions of several 100$ \mu \text{m}

of the conventional capacitively shunted flux quantum bits (qubits) can be eliminated, resulting in significant reduction of the footprint. We systematically calculated the SSFQ performances, such as the anharmonicity, and investigated their dependences on the circuit parameters. As a result, it was shown that the SSFQs have the large anharmonicity of 400–2000 MHz for the reasonable parameters, such as the large junction area of around 1

\mu \text{m}^{2}

and the small critical current density of around 10

\text{A/cm}^{2}$. Furthermore, we derived and estimated the relative relaxation time of the SSFQs due to the charge and flux noises. As a result, we found that the high anharmonicity over 800 MHz could be achieved without degrading the relaxation time from that of the high-coherence flux qubits. The SSFQs offer the new choice of the highly scalable qubits, which achieve both the small footprint and high anharmonicity.