Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Diagonalizing Quantum Spin Chains

R.J. Slooter

Published Jul 3, 2015• 0 citations
OpenAlex

Abstract

The goal of this research project is to study spin chains. This involves diagonalizing large matrices. These largematrices are theHamiltonian matrices of the quantumspin chains. So the eigenvalues represent energy values. Before going into the actual programming it is important to understand how the Hamiltonian works, and how the quantum spin chain is modeled. The first case studied is a static spin-12 system, for this system we want to know the lowest eigenvalues this will be done using the Lanczos algorithm. Once the static case is solved it is possible to extend the system with a variable magnetic field. The goal is to optimize this program, therefore we take a look at possible improvements. Another topic is the seemingly critical behavior of the system, for this the critical exponents are determined. Finally we will look into the DensityMatrix Renormalization Group (DMRG) method.

Related papers

DMRG och dess tillämpning på den endimensionella (1D) Heisenberg modellen

Jimmy Johansson

In this thesis, we analyze how the DMRG method works and use it on the one-dimensional (1D) antiferromagnetic Heisenberg Chain with open boundaries. We explicitly demonstrate how DMRG works for both the spin 1/2 and the spin 1 model and write programs for them in Python. A detailed process of the 1D spin 1/2 Heisenberg chain for four sites is shown to get exact values for its ground state energy values and to show how each step of the DMRG process works. We then compare the DMRG method to the analytically exact values and get very precise results. The DMRG method uses what is called the density matrix, formed by the eigenvector of the system we want to approximate. The exact ground state eigenvalue is obtained for N=14 sites and comparing that value with the DMRG method with only the 40 (D=40) most important states kept of the density matrix we get a difference from the exact result by about 3.5*10^(-13) after using four sweeps with the finite DMRG method, calculated in a small fraction of the time. We calculate the ground state eigenvalues for bigger systems up to N=50 and see the ground state energy per site E_0/N approach the Bethe ansatz result E_0/N=1/4-ln(2) in the thermodynamic limit (when N goes to infinity). The same approach is used for the spin 1 chain and we write a program, computing ground state eigenvalues ranges of N up to 50 and here in the thermodynamic limit E_0/N approaches approximately -1.401485(2). Finally we use DMRG to target the lowest five eigenstates of both the spin 1/2 and spin 1 systems to visualize the energy gap from the ground state to the first excited energy level in the thermodynamic limit. We get the energy gap approaching 0 for the spin 1/2 model and approaching the Haldane gap delta E =0.4105(1) for the spin 1 chain with open boundaries with a fourfold degeneracy of the ground state.

•Jan 1, 2026•0 citations

Density-matrix algorithms for quantum renormalization groups

Steven R. White

A formulation of numerical real-space renormalization groups for quantum many-body problems is presented and several algorithms utilizing this formulation are outlined. The methods are presented and demonstrated using S=1/2 and S=1 Heisenberg chains as test cases. The key idea of the formulation is that rather than keep the lowest-lying eigenstates of the Hamiltonian in forming a new effective Hamiltonian of a block of sites, one should keep the most significant eigenstates of the block density matrix, obtained from diagonalizing the Hamiltonian of a larger section of the lattice which includes the block. This approach is much more accurate than the standard approach; for example, energies for the S=1 Heisenberg chain can be obtained to an accuracy of at least ${10}^{\mathrm{\ensuremath{-}}9}$. The method can be applied to almost any one-dimensional quantum lattice system, and can provide a wide variety of static properties.

Physical review. B, Condensed matter•Oct 1, 1993•3,316 citations

The density matrix renormalization group and critical phenomena

Robert J. Bursill, Fatma Göde

We adapt White`s (1992, 1993) density matrix renormalization group (DMRG) to the direct study of critical phenomena. We use the DMRG to generate transformations in the space of coupling constants. We postulate that a study of density matrix eigenvalues leads to a natural identification of renormalized blocks, operators and Hamiltonians. We apply the scheme to the phase transition in the anisotropic spin-1/2 Heisenberg chain. In the simplest case where the two most probable states in odd-sized blocks are used to construct approximate renormalization group transformations, we find qualitative improvement upon the standard real-space renormalization group method for the thermal exponent nu .

arXiv:cond-mat/9511045•Journal of Physics Condensed Matter•Dec 11, 1995•4 citations

Density-matrix renormalization group: a pedagogical introduction

Gonçalo Catarina, Bruno Murta

Abstract The physical properties of a quantum many-body system can, in principle, be determined by diagonalizing the respective Hamiltonian, but the dimensions of its matrix representation scale exponentially with the number of degrees of freedom. Hence, only small systems that are described through simple models can be tackled via exact diagonalization. To overcome this limitation, numerical methods based on the renormalization group paradigm that restrict the quantum many-body problem to a manageable subspace of the exponentially large full Hilbert space have been put forth. A striking example is the density-matrix renormalization group (DMRG), which has become the reference numerical method to obtain the low-energy properties of one-dimensional quantum systems with short-range interactions. Here, we provide a pedagogical introduction to DMRG, presenting both its original formulation and its modern tensor-network-based version. This colloquium sets itself apart from previous contributions in two ways. First, didactic code implementations are provided to bridge the gap between conceptual and practical understanding. Second, a concise and self-contained introduction to the tensor-network methods employed in the modern version of DMRG is given, thus allowing the reader to effortlessly cross the deep chasm between the two formulations of DMRG without having to explore the broad literature on tensor networks. We expect this pedagogical review to find wide readership among students and researchers who are taking their first steps in numerical simulations via DMRG. Graphic abstract

arXiv:2304.13395•The European Physical Journal B•Aug 1, 2023•36 citations

An Attempt to Calculate Energy Eigenvalues in Quantum Systems of Large Sizes

Tomo Munehisa, Yasuko Munehisa

We report an attempt to calculate energy eigenvalues of large quantum systems by the diagonalization of an effectively truncated Hamiltonian matrix. For this purpose we employ a specific way to systematically make a set of orthogonal states from a trial wavefunction and the Hamiltonian. In comparison with the Lanczos method, which is quite powerful if the size of the system is within the memory capacity of computers, our method requires much less memory resources at the cost of the extreme accuracy. In this paper we demonstrate that our method works well in the systems of one-dimensional frustrated spins up to 48 sites, of bosons on a chain up to 32 sites and of fermions on a ladder up to 28 sites. We will see this method enables us to study eigenvalues of these quantum systems within reasonable accuracy.

arXiv:cond-mat/9912295•Journal of the Physical Society of Japan•Jul 15, 2000•4 citations

Exact Diagonalization Techniques for Quantum Spin Systems

Jürgen Schnack

The essence of quantum magnetism lies in correlated many-body states. They determine the physical properties beyond paramagnetism. Even constructions as simple as singlets or triplets cannot be understood without the mathematical concept of superpositions. This is even more evident if time evolution of quantum states and phenomena such as quantum coherenceQuantum coherence are considered. The major approach to assess correlated many-body states in quantum magnetism of molecules is exact diagonalizationDiagonalization of the many-body Hamiltonian describing the physical system. Symmetries are of great help when tackling the numerical task of matrix diagonalization since they allow to decompose a problem of large Hilbert spaceHilbert space dimension into a number of smaller problems. This approach will be presented first. It rests on the identification of the available symmetries—e.g., U(1), SU(2), as well as point groupsPoint group—and their application. However, the applicability of exact diagonalizationDiagonalization is limited by the exponential growth of the Hilbert spaceHilbert space of the spin system with the number of spins: $$\dim \left( {\mathcal{H}} \right) = \mathop \prod \nolimits_{i} \left( {2 s_{i} + 1} \right)$$ . Nowadays, complex Hermitian matricesHermitian matrices of a linear dimension of about 100,000 can be completely diagonalized on supercomputers which limits the number of spins depending on their size $$s_{i}$$ to just a few. I will therefore present a very accurate approximation to exact diagonalization that rests on Lanczos procedures and the concept of typicality. The most popular version, the finite-temperature Lanczos methodFinite-Temperature Lanczos Method (FTLM), allows to evaluate low-energy spectroscopic data, thermal averages as well as time evolutions for systems with Hilbert space dimensions of up to about 1011. Hands-on experience and examples will be provided.

Challenges and advances in computational chemistry and physics•Jan 1, 2023•3 citations
The goal of this research project is to study spin chains. This involves diagonalizing large matrices. These largematrices are theHamiltonian matrices of the quantumspin chains. So the eigenvalues represent energy values. Before going into the actual programming it is important to understand how the Hamiltonian works, and how the quantum spin chain is modeled. The first case studied is a static spin-12 system, for this system we want to know the lowest eigenvalues this will be done using the Lanczos algorithm. Once the static case is solved it is possible to extend the system with a variable magnetic field. The goal is to optimize this program, therefore we take a look at possible improvements. Another topic is the seemingly critical behavior of the system, for this the critical exponents are determined. Finally we will look into the DensityMatrix Renormalization Group (DMRG) method.
In this thesis, we analyze how the DMRG method works and use it on the one-dimensional (1D) antiferromagnetic Heisenberg Chain with open boundaries. We explicitly demonstrate how DMRG works for both the spin 1/2 and the spin 1 model and write programs for them in Python. A detailed process of the 1D spin 1/2 Heisenberg chain for four sites is shown to get exact values for its ground state energy values and to show how each step of the DMRG process works. We then compare the DMRG method to the analytically exact values and get very precise results. The DMRG method uses what is called the density matrix, formed by the eigenvector of the system we want to approximate. The exact ground state eigenvalue is obtained for N=14 sites and comparing that value with the DMRG method with only the 40 (D=40) most important states kept of the density matrix we get a difference from the exact result by about 3.5*10^(-13) after using four sweeps with the finite DMRG method, calculated in a small fraction of the time. We calculate the ground state eigenvalues for bigger systems up to N=50 and see the ground state energy per site E_0/N approach the Bethe ansatz result E_0/N=1/4-ln(2) in the thermodynamic limit (when N goes to infinity). The same approach is used for the spin 1 chain and we write a program, computing ground state eigenvalues ranges of N up to 50 and here in the thermodynamic limit E_0/N approaches approximately -1.401485(2). Finally we use DMRG to target the lowest five eigenstates of both the spin 1/2 and spin 1 systems to visualize the energy gap from the ground state to the first excited energy level in the thermodynamic limit. We get the energy gap approaching 0 for the spin 1/2 model and approaching the Haldane gap delta E =0.4105(1) for the spin 1 chain with open boundaries with a fourfold degeneracy of the ground state.
A formulation of numerical real-space renormalization groups for quantum many-body problems is presented and several algorithms utilizing this formulation are outlined. The methods are presented and demonstrated using S=1/2 and S=1 Heisenberg chains as test cases. The key idea of the formulation is that rather than keep the lowest-lying eigenstates of the Hamiltonian in forming a new effective Hamiltonian of a block of sites, one should keep the most significant eigenstates of the block density matrix, obtained from diagonalizing the Hamiltonian of a larger section of the lattice which includes the block. This approach is much more accurate than the standard approach; for example, energies for the S=1 Heisenberg chain can be obtained to an accuracy of at least ${10}^{\mathrm{\ensuremath{-}}9}$. The method can be applied to almost any one-dimensional quantum lattice system, and can provide a wide variety of static properties.
We adapt White`s (1992, 1993) density matrix renormalization group (DMRG) to the direct study of critical phenomena. We use the DMRG to generate transformations in the space of coupling constants. We postulate that a study of density matrix eigenvalues leads to a natural identification of renormalized blocks, operators and Hamiltonians. We apply the scheme to the phase transition in the anisotropic spin-1/2 Heisenberg chain. In the simplest case where the two most probable states in odd-sized blocks are used to construct approximate renormalization group transformations, we find qualitative improvement upon the standard real-space renormalization group method for the thermal exponent nu .
Abstract The physical properties of a quantum many-body system can, in principle, be determined by diagonalizing the respective Hamiltonian, but the dimensions of its matrix representation scale exponentially with the number of degrees of freedom. Hence, only small systems that are described through simple models can be tackled via exact diagonalization. To overcome this limitation, numerical methods based on the renormalization group paradigm that restrict the quantum many-body problem to a manageable subspace of the exponentially large full Hilbert space have been put forth. A striking example is the density-matrix renormalization group (DMRG), which has become the reference numerical method to obtain the low-energy properties of one-dimensional quantum systems with short-range interactions. Here, we provide a pedagogical introduction to DMRG, presenting both its original formulation and its modern tensor-network-based version. This colloquium sets itself apart from previous contributions in two ways. First, didactic code implementations are provided to bridge the gap between conceptual and practical understanding. Second, a concise and self-contained introduction to the tensor-network methods employed in the modern version of DMRG is given, thus allowing the reader to effortlessly cross the deep chasm between the two formulations of DMRG without having to explore the broad literature on tensor networks. We expect this pedagogical review to find wide readership among students and researchers who are taking their first steps in numerical simulations via DMRG. Graphic abstract
We report an attempt to calculate energy eigenvalues of large quantum systems by the diagonalization of an effectively truncated Hamiltonian matrix. For this purpose we employ a specific way to systematically make a set of orthogonal states from a trial wavefunction and the Hamiltonian. In comparison with the Lanczos method, which is quite powerful if the size of the system is within the memory capacity of computers, our method requires much less memory resources at the cost of the extreme accuracy. In this paper we demonstrate that our method works well in the systems of one-dimensional frustrated spins up to 48 sites, of bosons on a chain up to 32 sites and of fermions on a ladder up to 28 sites. We will see this method enables us to study eigenvalues of these quantum systems within reasonable accuracy.
The essence of quantum magnetism lies in correlated many-body states. They determine the physical properties beyond paramagnetism. Even constructions as simple as singlets or triplets cannot be understood without the mathematical concept of superpositions. This is even more evident if time evolution of quantum states and phenomena such as quantum coherenceQuantum coherence are considered. The major approach to assess correlated many-body states in quantum magnetism of molecules is exact diagonalizationDiagonalization of the many-body Hamiltonian describing the physical system. Symmetries are of great help when tackling the numerical task of matrix diagonalization since they allow to decompose a problem of large Hilbert spaceHilbert space dimension into a number of smaller problems. This approach will be presented first. It rests on the identification of the available symmetries—e.g., U(1), SU(2), as well as point groupsPoint group—and their application. However, the applicability of exact diagonalizationDiagonalization is limited by the exponential growth of the Hilbert spaceHilbert space of the spin system with the number of spins: $$\dim \left( {\mathcal{H}} \right) = \mathop \prod \nolimits_{i} \left( {2 s_{i} + 1} \right)$$ . Nowadays, complex Hermitian matricesHermitian matrices of a linear dimension of about 100,000 can be completely diagonalized on supercomputers which limits the number of spins depending on their size sis_{i}si​ to just a few. I will therefore present a very accurate approximation to exact diagonalization that rests on Lanczos procedures and the concept of typicality. The most popular version, the finite-temperature Lanczos methodFinite-Temperature Lanczos Method (FTLM), allows to evaluate low-energy spectroscopic data, thermal averages as well as time evolutions for systems with Hilbert space dimensions of up to about 1011. Hands-on experience and examples will be provided.