[ANGLES] Quantum frequency conversion of quantum memory compatible photons to telecom wavelength is a requirement for the implementation of scalable quantum repeaters, a key ingredient for long distance quantum communications in optical bers. In this work we characterize a quantum frequency converter implemented with a non-linear waveguide, meant to be coupled to a rubidium atomic ensemble quantum memory. We show promising results allowing us to work in the quantum regime, being this the first demonstration of quantum frequency conversion with quantum memory compatible photons using a solid state device.
[ANGLES] Quantum frequency conversion of quantum memory compatible photons to telecom wavelength is a requirement for the implementation of scalable quantum repeaters, a key ingredient for long distance quantum communications in optical bers. In this work we characterize a quantum frequency converter implemented with a non-linear waveguide, meant to be coupled to a rubidium atomic ensemble quantum memory. We show promising results allowing us to work in the quantum regime, being this the first demonstration of quantum frequency conversion with quantum memory compatible photons using a solid state device.
In quantum repeater schemes for long distance quantum communication, quantum memories (QMs) play a vital role. For these applications, QMs need to be connected to the fiber optics network. However most QMs operate at wavelengths where the absorption in optical fibers is high. Therefore, their connection to a quantum frequency converter (QFC) to telecom wavelengths is required. In this work we convert an heralded single photon emitted by a rubidium atomic ensemble QM, using a QFC implemented with a non-linear waveguide. The main advantages of this converter setup are its compactness, relative simplicity and wavelength flexibility. We show that after this process the non-classical correlations between the heralding photons and converted heralded photons generated in the QM are preserved. This is the first time that frequency conversion of non-classical light emitted by an atomic QM is performed with a solid state device.
In quantum repeater schemes for long distance quantum communication, quantum memories (QMs) play a vital role. For these applications, QMs need to be connected to the fiber optics network. However most QMs operate at wavelengths where the absorption in optical fibers is high. Therefore, their connection to a quantum frequency converter (QFC) to telecom wavelengths is required. In this work we convert an heralded single photon emitted by a rubidium atomic ensemble QM, using a QFC implemented with a non-linear waveguide. The main advantages of this converter setup are its compactness, relative simplicity and wavelength flexibility. We show that after this process the non-classical correlations between the heralding photons and converted heralded photons generated in the QM are preserved. This is the first time that frequency conversion of non-classical light emitted by an atomic QM is performed with a solid state device.
In a typical quantum repeater scenario, remote quantum memories have to be interconnected by flying qubits transmitted in quantum channels. e.g. single photons in photonic fiber links. To establish long-distance communication, photons in the low-loss telecom wavlength regime are desirable. However, the majority of the candidates for quantum memories such as trapped atoms or ions, rare earth ensembles, color centers in diamond, atomic ensembles etc. possess optical transitions merely in the visible or near-infrared spectral regime below 1000 nm. One possible solution is the transduction of these wavelengths to the telecom region via quantum frequency conversion (QFC) based on three-wave-mixing processes in a nonlinear χ(2)-medium. Technical achievements in recent years enabled high conversion efficiencies and low conversion-induced noise contributions resulting in signal-to-background ratios high enough to demonstrate the preservation of several classical and quantum properties of the photons, e.g. first- and second-order coherence [1], time-bin entanglement [2], polarization entanglement [3] or indistinguishability [4]. QFC thus provides a powerful toolbox to interface quantum systems to the telecom bands and beyond that yet to interconnect dissimilar quantum systems.
Over the past decade, quantum computers have emerged as a promising technology to enable transformational advances in information processing and communication and solve problems that are intractable to classical computers. While there is great promise in linking quantum computers together over long distances via quantum channels, these technologies are still under development. Solid-state emitters with coherent spin-photon interfaces, long spin lifetimes, and narrow optical transitions are a leading platform for use as quantum memories in networked quantum repeaters. However, while such emitters have already enabled advanced quantum networking demonstrations in laboratory settings, applying these devices as useful memory devices at scale is a key outstanding challenge. In this thesis, we experimentally investigate solid-state quantum memories for quantum information applications. First, we develop experimental techniques to characterize solid-state emitters with high throughput, enabling both better understanding of the distribution of emitter properties and improved feedback on material preparation and device fabrication. Next, we implement quantum frequency conversion to create a coherent spin-photon interface between silicon-vacancy centers in diamond and optical photons in the low-loss telecom band. Finally, we investigate color centers in other engineering materials, including silicon and silicon carbide, to better understand the fundamental trade space of requirements for solid-state hosts. Together, these efforts represent a significant advance in creating, controlling, and deploying telecom-compatible spin interfaces, paving the way for memory-enabled quantum repeaters.
The ability to control the optical frequency of quantum state carriers (i.e. photons) is an important functionality for future quantum networks. It allows all matter quantum systems - nodes of the network - to be compatible with the telecommunication C-band, therefore enabling long distance fiber quantum communication between them. It also allows dissimilar nodes to be connected with each other, thus resulting in heterogeneous networks that can take advantage of the different capabilities offered by the diversity of its constituents. Quantum memories are one of the building blocks of a quantum network, enabling the storage of quantum states of light and the entanglement distribution over long distances. In our group, two different types of memories are investigated: a cold atomic ensemble and an ion-doped crystal. In this thesis I investigate the quantum frequency conversion of narrow-band photons, emitted or absorbed by optical quantum memories, with two different objectives: the first one is to connect quantum memories emitting or absorbing visible single photons with the telecommunication wavelengths, where fiber transmission loss is minimum. The second and main goal is to study the compatibility between disparate quantum nodes, emitting or absorbing photons at different wavelengths. More precisely the objective is to achieve a quantum connection between the two optical memories studied using quantum frequency conversion techniques. The main core of this work is the quantum frequency conversion interface that bridges the gap between the cold ensemble of Rubidium atoms, emitting photons at 780nm, and the Praseodymium ion doped crystal, absorbing photons at 606nm. This interface is composed of two different frequency conversion devices, where a cascaded conversions takes place: the first one converts 780nm photons to the telecommunication C-band, and the second one converts them back to visible, at 606nm. This comes with several challenges such as conversion efficiency, phase stability and parasitic noise reduction, which are important considerations to show the conservation of quantum behaviors through the conversion process. This work can be divided in three parts. In a first one, we built a quantum frequency conversion interface between 606nm and the C-band wavelength, capable of both up and down-conversion of single photon level light. We also characterized the noise processes involved in this specific conversion. In the down-conversion case we showed that memory compatible heralded single photons emitted from a photon pair source preserve their non-classical properties through the conversion process. In the up-conversion case, we showed the storage of converted telecom photons in the praseodymium doped crystal, and their retrieval with high signal to noise ratio. The second part of the work was devoted to the conversion of photons from an emissive Rubidium atomic quantum memory to the telecom C band. In this work we converted the heralding photons from the atomic ensemble and measured non-classical correlations between a stored excitation and a C-band photon, necessary for quantum repeater applications. In the last part of the thesis, we setup the full frequency conversion interface and showed that heralded photons emitted by the atomic ensemble are converted, stored in the solid state memory and retrieved with high signal to noise ratio. We demonstrated that a single collective excitation stored in the atomic ensemble is transfered to the crystal by mean of a single photon at telecom wavelength. We also showed time-bin qubit transfer between the two quantum memories. This work represents the first proof of principle of a photonic quantum connection between disparate quantum memory nodes. The results presented in this thesis pave the way towards the realization of modular and hybrid quantum networks.
Quantum communication aims at generating and distributing qubits between distant sites, in order to implement quantum information protocols, such as quantum key distribution, quantum teleportation and quantum processing. For many quantum protocols, and especially for quantum repeaters, which make quantum communication over long distances much more efficient, storage and/or emission of photonic states is necessary and represents a crucial step towards the realisation of a quantum network. An outstanding challenge of quantum communication is to implement quantum memories for photonic qubits, combining long storage time with high fidelity between the input and output states, and good efficiency. Moreover, to be compatible with quantum network applications, such as quantum repeaters, these memories have to enable heralded storage and on-demand read-out. Cold atomic ensembles hold promise for satisfying both these prerequisites, and are therefore a good candidate as storage medium, offering a compromise between different benchmarks. We are setting up an experiment intended to map polarisation qubits onto an optically pumped cold atomic ensemble of rubidium serving as our quantum memory device. In a first development, our quantum memory device will be operated in the single photon emission regime so as to implement, together with an entangled photon-pair source based on guided-wave optics, the quantum teleportation scheme.