Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Cold guided beams of polar molecules

M. Motsch

Published Jan 1, 2010• 1 citation
OpenAlex

Abstract

Slow molecules are efficiently extracted from a thermal reservoir by exploiting the interaction between polar molecules and the field provided by an electrostatic quadrupole guide. Electrostatic velocity filtering is widely applicable, which is demonstrated by producing guided beams of ammonia ND3, formaldehyde H2CO, and the water isotopologs H2O, D2O, and HDO. Ultraviolet depletion spectroscopy in a cold guided beam of formaldehyde makes the population in individual rotational states visible and testifies their key role in velocity filtering. Enhanced Rayleigh scattering into an optical cavity is investigated as an alternative non-destructive detection method for cold molecules. For various room-temperature gases, the observed enhancement is well described by interference of electromagnetic fields scattered into the resonator by a classical driven dipole oscillator.

Related papers

Construction and Operation of a Cryogenic Source for Cold Polar Molecules

Christian Sommer

This thesis reports on the combination of buffer-gas cooling with electric velocity filtering to produce a high-density guided beam of slow and internally cold polar molecules. In the continuous source, warm molecules are first cooled by collisions with a cryogenic helium buffer gas. Cold molecules are then extracted by means of an electric quadrupole guide. For formaldehyde the population of individual rotational states in the guide is monitored by depletion spectroscopy, resulting in single-state populations up to 82 %. This thesis also reports on a technique to produce pulses of slow guided molecules. The pulses exhibit a narrow velocity distribution around a tunable velocity.

•Jan 1, 2011•0 citations

Cold guided beams of water isotopologs

M. Motsch, L. D. van Buuren, Christian Sommer +3 more

Electrostatic velocity filtering and guiding is an established technique to produce high fluxes of cold polar molecules. In this paper we clarify different aspects of this technique by comparing experiments to detailed calculations. In the experiment, we produce cold guided beams of the three water isotopologs ${\mathrm{H}}_{2}\mathrm{O}$, ${\mathrm{D}}_{2}\mathrm{O}$, and HDO. Their different rotational constants and orientations of electric dipole moments lead to remarkably different Stark shift properties, despite the molecules being very similar in a chemical sense. Therefore, the signals of the guided water isotopologs differ on an absolute scale and also exhibit characteristic electrode voltage dependencies. We find excellent agreement between the relative guided fractions and voltage dependencies of the investigated isotopologs and predictions made by our theoretical model of electrostatic velocity filtering.

arXiv:0809.1728•Physical Review A•Jan 7, 2009•30 citations

Continuous guided beams of slow and internally cold polar molecules

Christian Sommer, Laurens D. van Buuren, M. Motsch +4 more

We describe the combination of buffer-gas cooling with electrostatic velocity filtering to produce a high-flux continuous guided beam of internally cold and slow polar molecules. In a previous paper (L.D. van Buuren et al., Phys. Rev. Lett., 2009, 102, 033001) we presented results on density and state purity for guided beams of ammonia and formaldehyde using an optimized set-up. Here we describe in more detail the technical aspects of the cryogenic source, its operation, and the optimization experiments that we performed to obtain the best performance. The versatility of the source is demonstrated by the production of guided beams of different molecular species.

arXiv:0812.1923•Faraday Discussions•Jan 1, 2009•44 citations

Electrostatic Extraction of Cold Molecules from a Cryogenic Reservoir

L. D. van Buuren, Christian Sommer, M. Motsch +5 more

We present a method which delivers a continuous, high-density beam of slow and internally cold polar molecules. In our source, warm molecules are first cooled by collisions with a cryogenic helium buffer gas. Cold molecules are then extracted by means of an electrostatic quadrupole guide. For ${\mathrm{ND}}_{3}$ the source produces fluxes up to $(7{\ifmmode\pm\else\textpm\fi{}}_{4}^{7})\ifmmode\times\else\texttimes\fi{}{10}^{10}\text{ }\text{ }\mathrm{\text{molecules}}/\mathrm{s}$ with peak densities up to $(1.0{\ifmmode\pm\else\textpm\fi{}}_{0.6}^{1.0})\ifmmode\times\else\texttimes\fi{}{10}^{9}\text{ }\text{ }\mathrm{\text{molecules}}/{\mathrm{cm}}^{3}$. For ${\mathrm{H}}_{2}\mathrm{CO}$ the population of rovibrational states is monitored by depletion spectroscopy, resulting in single-state populations up to $(82\ifmmode\pm\else\textpm\fi{}10)%$.

arXiv:0806.2523•Physical Review Letters•Jan 21, 2009•93 citations

Continuous source of translationally cold dipolar molecules

S. A. Rangwala, T. Junglen, T. Rieger +2 more

The Stark interaction of polar molecules with an inhomogeneous electric field is exploited to select slow molecules from a room-temperature reservoir and guide them into an ultrahigh vacuum chamber. A linear electrostatic quadrupole with a curved section selects molecules with small transverse and longitudinal velocities. The source is tested with formaldehyde $({\mathrm{H}}_{2}\mathrm{CO})$ and deuterated ammonia $({\mathrm{ND}}_{3}).$ With ${\mathrm{H}}_{2}\mathrm{CO}$ a continuous flux is measured of $\ensuremath{\approx}{10}^{9}/\mathrm{s}$ and a longitudinal temperature of a few kelvin. The data are compared with the result of a Monte Carlo simulation.

arXiv:physics/0209041•Physical Review A•Apr 17, 2003•210 citations

State-selective detection of velocity-filtered ND 3 molecules

Benjamin Bertsche, Andreas Osterwalder

Translationally cold and slow ND${}_{3}$ is prepared by filtering the slow molecules from a thermal gas-phase sample using a curved electrostatic hexapole guide. This filter, like the curved quadrupole guide introduced by Rangwala et al. [Phys. Rev. A 67, 043406 (2003)] selects molecules by their forward velocity and effective electric dipole moment. Here we describe two main modifications with respect to previous work: (1) A segmented hexapole guide is used that produces a harmonic potential for the linearly Stark-shifted levels of ND${}_{3}$. A curved guide is combined with a straight hexapole guide, and independent high-voltage supplies are employed to allow for bandpass velocity filtering. (2) State-selective laser ionization is used to obtain time- and state-selective detection of the guided molecules. This enables the experimental determination of the rotational state population of the guided molecules.

arXiv:1004.3812•Physical Review A•Sep 17, 2010•29 citations
Slow molecules are efficiently extracted from a thermal reservoir by exploiting the interaction between polar molecules and the field provided by an electrostatic quadrupole guide. Electrostatic velocity filtering is widely applicable, which is demonstrated by producing guided beams of ammonia ND3, formaldehyde H2CO, and the water isotopologs H2O, D2O, and HDO. Ultraviolet depletion spectroscopy in a cold guided beam of formaldehyde makes the population in individual rotational states visible and testifies their key role in velocity filtering. Enhanced Rayleigh scattering into an optical cavity is investigated as an alternative non-destructive detection method for cold molecules. For various room-temperature gases, the observed enhancement is well described by interference of electromagnetic fields scattered into the resonator by a classical driven dipole oscillator.
This thesis reports on the combination of buffer-gas cooling with electric velocity filtering to produce a high-density guided beam of slow and internally cold polar molecules. In the continuous source, warm molecules are first cooled by collisions with a cryogenic helium buffer gas. Cold molecules are then extracted by means of an electric quadrupole guide. For formaldehyde the population of individual rotational states in the guide is monitored by depletion spectroscopy, resulting in single-state populations up to 82 %. This thesis also reports on a technique to produce pulses of slow guided molecules. The pulses exhibit a narrow velocity distribution around a tunable velocity.
Electrostatic velocity filtering and guiding is an established technique to produce high fluxes of cold polar molecules. In this paper we clarify different aspects of this technique by comparing experiments to detailed calculations. In the experiment, we produce cold guided beams of the three water isotopologs H2O{\mathrm{H}}_{2}\mathrm{O}H2​O, D2O{\mathrm{D}}_{2}\mathrm{O}D2​O, and HDO. Their different rotational constants and orientations of electric dipole moments lead to remarkably different Stark shift properties, despite the molecules being very similar in a chemical sense. Therefore, the signals of the guided water isotopologs differ on an absolute scale and also exhibit characteristic electrode voltage dependencies. We find excellent agreement between the relative guided fractions and voltage dependencies of the investigated isotopologs and predictions made by our theoretical model of electrostatic velocity filtering.
We describe the combination of buffer-gas cooling with electrostatic velocity filtering to produce a high-flux continuous guided beam of internally cold and slow polar molecules. In a previous paper (L.D. van Buuren et al., Phys. Rev. Lett., 2009, 102, 033001) we presented results on density and state purity for guided beams of ammonia and formaldehyde using an optimized set-up. Here we describe in more detail the technical aspects of the cryogenic source, its operation, and the optimization experiments that we performed to obtain the best performance. The versatility of the source is demonstrated by the production of guided beams of different molecular species.
We present a method which delivers a continuous, high-density beam of slow and internally cold polar molecules. In our source, warm molecules are first cooled by collisions with a cryogenic helium buffer gas. Cold molecules are then extracted by means of an electrostatic quadrupole guide. For ND3{\mathrm{ND}}_{3}ND3​ the source produces fluxes up to $(7{\ifmmode\pm\else\textpm\fi{}}_{4}^{7})\ifmmode\times\else\texttimes\fi{}{10}^{10}\text{ }\text{ }\mathrm{\text{molecules}}/\mathrm{s}$ with peak densities up to $(1.0{\ifmmode\pm\else\textpm\fi{}}_{0.6}^{1.0})\ifmmode\times\else\texttimes\fi{}{10}^{9}\text{ }\text{ }\mathrm{\text{molecules}}/{\mathrm{cm}}^{3}$. For H2CO{\mathrm{H}}_{2}\mathrm{CO}H2​CO the population of rovibrational states is monitored by depletion spectroscopy, resulting in single-state populations up to $(82\ifmmode\pm\else\textpm\fi{}10)%$.
The Stark interaction of polar molecules with an inhomogeneous electric field is exploited to select slow molecules from a room-temperature reservoir and guide them into an ultrahigh vacuum chamber. A linear electrostatic quadrupole with a curved section selects molecules with small transverse and longitudinal velocities. The source is tested with formaldehyde (H2CO)({\mathrm{H}}_{2}\mathrm{CO})(H2​CO) and deuterated ammonia (ND3).({\mathrm{ND}}_{3}).(ND3​). With H2CO{\mathrm{H}}_{2}\mathrm{CO}H2​CO a continuous flux is measured of $\ensuremath{\approx}{10}^{9}/\mathrm{s}$ and a longitudinal temperature of a few kelvin. The data are compared with the result of a Monte Carlo simulation.
Translationally cold and slow ND3{}_{3}3​ is prepared by filtering the slow molecules from a thermal gas-phase sample using a curved electrostatic hexapole guide. This filter, like the curved quadrupole guide introduced by Rangwala et al. [Phys. Rev. A 67, 043406 (2003)] selects molecules by their forward velocity and effective electric dipole moment. Here we describe two main modifications with respect to previous work: (1) A segmented hexapole guide is used that produces a harmonic potential for the linearly Stark-shifted levels of ND3{}_{3}3​. A curved guide is combined with a straight hexapole guide, and independent high-voltage supplies are employed to allow for bandpass velocity filtering. (2) State-selective laser ionization is used to obtain time- and state-selective detection of the guided molecules. This enables the experimental determination of the rotational state population of the guided molecules.