Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Pump Power and Length for Efficient Single-Photon Frequency Conversion in a Periodically Poled Waveguide

William Alexander Aldred

Published Nov 12, 2026• 1 citation
Publisher

Abstract

Converting a single photon from one wavelength to another in a periodically poled waveguide is governed by a sinusoidal exchange with the pump field. The first maximum of that exchange sets the pump power and length a design should aim for; overshooting it converts the photon back. This study computes the quantities that follow from stated assumptions for a periodically poled lithium niobate waveguide converting 780 nm to 1550 nm, normalised efficiency 100 percent per watt per square centimetre in the stated convention, using the relations set out in the Methods. The headline results are pump full at 3cm W = 0.2742, pump full at 1cm W = 2.467, pump full at 5cm W = 0.0987, conversion detuned dkL 2 = 0.7081, conversion on phase match = 1. The central question is stated as follows: For a stated normalised efficiency, what pump power reaches full conversion in waveguides of 1 to 5 cm, and how much conversion remains when the phase matching is detuned by a stated amount? The answer obtained here is conditional on the assumptions listed in the paper and in the deposited calculation; changing an assumption changes the numbers in the way the sensitivity discussion describes. Waveguide converters report internal conversion from tens of percent to near unity, with external values reduced by coupling and filtering losses. The work is a computation, not a laboratory measurement, and it is labelled accordingly. Where the computed result is unfavourable to the device or effect under study, that outcome is reported in the same terms as a favourable one, because a bound that only appears when it is welcome is not a bound at all. All numerical statements in this abstract are reproduced by the deposited script from the stated inputs.

DOI
10.5281/zenodo.24159576

Related papers

Design Blueprint: Pump Power and Length for Efficient Single-Photon Frequency Conversion in a Periodically Poled Waveguide

William Alexander Aldred

Design blueprint derived from the source paper (DOI 10.5281/zenodo.24159577): Converting a single photon from one wavelength to another in a periodically poled waveguide is governed by a sinusoidal exchange with the pump field. The first maximum of that exchange sets the pump power and length a design should aim for; overshooting it converts the photon back. This study computes the quantities that follow from stated assumptions for a periodically poled lithium niobate waveguide converting 780 nm to 1550 nm, normalised efficiency 100 percent per watt per square centimetre in the stated convention, using the relations set out in the Methods. The headline results are pump full at 3cm W = 0.2742, pump full at 1cm W = 2.467, pump full at 5cm W = 0.0987, conversion detuned dkL 2 = 0.7081, conversion on phase match = 1. The central question is stated as follows: For a stated normalised efficiency, what pump power reaches full conversion in waveguides of 1 to 5 cm, and how much conversion remains when the phase matching is detuned by a stated amount? The answer obtained here is conditional on the assumptions listed in the paper and in the deposited calculation; changing an assumption changes the numbers in the way the sensitivity discussion describes. Waveguide converters report internal conversion from tens of percent to near unity, with external values reduced by coupling and filtering losses. The work is a computation, not a laboratory measurement, and it is labelled accordingly. Where the computed result is unfavourable to the device or effect under study, that outcome is reported in the same terms as a favourable one, because a bound that only appears when it is welcome is not a bound at all. All numerical statements in this abstract are reproduced by the deposited script from the stated inputs. Status: DESIGN BLUEPRINT — SIMULATED, NOT MEASURED — NOT BUILT. All numbers are simulated values from the source paper's computation, deposited with this blueprint as compute.py and results.json. AI-use disclosure: Dave, an AI research system, assisted with the computation and drafting under the author's direction; author of record William Alexander Aldred.

•Nov 12, 2026•0 citations

All-Optical Wavelength Conversion Based on the Cascaded Sum and Difference Frequency Generation in a Periodically Poled Lithium-Niobate Waveguide

Jian Wang

The principle of all-optical wavelength conversion based on the cascaded sum and difference frequency generation (SFG+DFG) in quasi-phase-matched (QPM) periodically poled LiNbO3 (PPLN) waveguides is introduced. The conversion efficiency of the wavelength converter is calculated. The influences of the powers and span of two pumps on the conversion efficiency are analyzed. Bandwidth of one pump wavelength is discussed. The tuning is about 0.5 nm. The signal pulse width is compressed about 0.68 times.

Optics & Optoelectronic Technology•Jan 1, 2007•0 citations

Response Flattening of Efficient Broadband Wavelength Converters Based on Cascaded Sum and Difference Frequency Generation in Periodically Poled Lithium Niobate Waveguides

Amirhossein Tehranchi, Raman Kashyap

For the single-pass and double-pass wavelength converters based on cascaded sum and difference frequency generation in quasi-phase matched lithium niobate waveguide, we present the criteria for a choice of the waveguide length and the assignment of pump powers to achieve the desired efficiency, ripple and bandwidth with a large pump wavelength difference of 75 nm. It is found that using the double-pass structure with a 95% reflectivity for the sum frequency wave, the mean efficiency is increased at least 5 dB compared to that of the single-pass one with the same length and input pump powers and the bandwidth is large enough to cover the entire conventional telecommunications C-band and long-wavelength L-band. To flatten the excessive response fluctuation of the double-pass scheme, we propose tuning one of the pumps to longer wavelengths incurring a small penalty of a slight reduction in the mean efficiency which can be compensated by increasing the input pump powers. We also show that to achieve the same amount of flatness, double-pass converters have a smaller efficiency penalty compared to the single-pass converters.

IEEE Journal of Quantum Electronics•Aug 24, 2009•7 citations

Degenerate parametric down-conversion at 1570 nm by periodically poled lithium niobate waveguide: a route to single photon source and photon entanglement

Stefania Castelletto, Ivo Pietro Degiovanni, Valentina Schettini +4 more

In this paper we measure the efficiency of photon pair production from parametric downconversion at the photon counting level, generated in a laboratory prototype of PPLN waveguide at 1572 nm. The aim is to enhance the brightness of an heralded single photon source and to improve compactness for quantum communication applications, namely quantum key distribution. We observed a maximum of the conversion efficiency corresponding to 7.9 106 photon pairs/s for a pump power of 28 μW. This value is compared with the measured pairs production in a classical experiment of difference frequency generation, realized with the same sample by analogue classical detection. We highlight the advantages of using the waveguide versus a bulk PPLN for such applications and we foresee further possible improvements by adopting waveguide in a single photon level experimental setup.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Apr 21, 2006•0 citations

Frequency up-conversion at the single-photon level in a periodically-poled lithium-niobate waveguide

Sarah Dugan, X. Li, Paul L. Voss +1 more

Using sum-frequency generation we fully up-convert signal photons at 1550 nm to 775 nm. Due to coupling and filtering losses at the output, overall quantum efficiency is /spl sime/3.4% with dark-count probability of 3%.

Quantum Electronics and Laser Science Conference•Dec 10, 2005•2 citations

Single-to-Multiple Channel Wavelength Conversions and Tuning of Picosecond Pulses in Quasi-Phase-Matched Waveguides

Jian Wang, Junqiang Sun, Luo Chuan-hong +3 more

We report the single-to-multiple channel wavelength conversions of 1.57-ps pulses based on cascaded second-harmonic generation and difference frequency generation in quasi-phase-matched periodically poled lithium niobate waveguides. For single-to-single channel wavelength conversion, no external cavity laser is required with use of a fibre ring laser. The conversion efficiency is about -21.44 dB. The converted idler wavelength can be tuned from 1526.4 nm to 1537.5 nm as the lasing pump wavelength is varied from 1566.1 nm to 1555.0 nm. By employing several input pumps, tunable single-to-dual and single-to-triple channel wavelength conversions are experimentally demonstrated.

Chinese Physics Letters•Jun 28, 2006•9 citations
Converting a single photon from one wavelength to another in a periodically poled waveguide is governed by a sinusoidal exchange with the pump field. The first maximum of that exchange sets the pump power and length a design should aim for; overshooting it converts the photon back. This study computes the quantities that follow from stated assumptions for a periodically poled lithium niobate waveguide converting 780 nm to 1550 nm, normalised efficiency 100 percent per watt per square centimetre in the stated convention, using the relations set out in the Methods. The headline results are pump full at 3cm W = 0.2742, pump full at 1cm W = 2.467, pump full at 5cm W = 0.0987, conversion detuned dkL 2 = 0.7081, conversion on phase match = 1. The central question is stated as follows: For a stated normalised efficiency, what pump power reaches full conversion in waveguides of 1 to 5 cm, and how much conversion remains when the phase matching is detuned by a stated amount? The answer obtained here is conditional on the assumptions listed in the paper and in the deposited calculation; changing an assumption changes the numbers in the way the sensitivity discussion describes. Waveguide converters report internal conversion from tens of percent to near unity, with external values reduced by coupling and filtering losses. The work is a computation, not a laboratory measurement, and it is labelled accordingly. Where the computed result is unfavourable to the device or effect under study, that outcome is reported in the same terms as a favourable one, because a bound that only appears when it is welcome is not a bound at all. All numerical statements in this abstract are reproduced by the deposited script from the stated inputs.
Design blueprint derived from the source paper (DOI 10.5281/zenodo.24159577): Converting a single photon from one wavelength to another in a periodically poled waveguide is governed by a sinusoidal exchange with the pump field. The first maximum of that exchange sets the pump power and length a design should aim for; overshooting it converts the photon back. This study computes the quantities that follow from stated assumptions for a periodically poled lithium niobate waveguide converting 780 nm to 1550 nm, normalised efficiency 100 percent per watt per square centimetre in the stated convention, using the relations set out in the Methods. The headline results are pump full at 3cm W = 0.2742, pump full at 1cm W = 2.467, pump full at 5cm W = 0.0987, conversion detuned dkL 2 = 0.7081, conversion on phase match = 1. The central question is stated as follows: For a stated normalised efficiency, what pump power reaches full conversion in waveguides of 1 to 5 cm, and how much conversion remains when the phase matching is detuned by a stated amount? The answer obtained here is conditional on the assumptions listed in the paper and in the deposited calculation; changing an assumption changes the numbers in the way the sensitivity discussion describes. Waveguide converters report internal conversion from tens of percent to near unity, with external values reduced by coupling and filtering losses. The work is a computation, not a laboratory measurement, and it is labelled accordingly. Where the computed result is unfavourable to the device or effect under study, that outcome is reported in the same terms as a favourable one, because a bound that only appears when it is welcome is not a bound at all. All numerical statements in this abstract are reproduced by the deposited script from the stated inputs. Status: DESIGN BLUEPRINT — SIMULATED, NOT MEASURED — NOT BUILT. All numbers are simulated values from the source paper's computation, deposited with this blueprint as compute.py and results.json. AI-use disclosure: Dave, an AI research system, assisted with the computation and drafting under the author's direction; author of record William Alexander Aldred.
The principle of all-optical wavelength conversion based on the cascaded sum and difference frequency generation (SFG+DFG) in quasi-phase-matched (QPM) periodically poled LiNbO3 (PPLN) waveguides is introduced. The conversion efficiency of the wavelength converter is calculated. The influences of the powers and span of two pumps on the conversion efficiency are analyzed. Bandwidth of one pump wavelength is discussed. The tuning is about 0.5 nm. The signal pulse width is compressed about 0.68 times.
For the single-pass and double-pass wavelength converters based on cascaded sum and difference frequency generation in quasi-phase matched lithium niobate waveguide, we present the criteria for a choice of the waveguide length and the assignment of pump powers to achieve the desired efficiency, ripple and bandwidth with a large pump wavelength difference of 75 nm. It is found that using the double-pass structure with a 95% reflectivity for the sum frequency wave, the mean efficiency is increased at least 5 dB compared to that of the single-pass one with the same length and input pump powers and the bandwidth is large enough to cover the entire conventional telecommunications C-band and long-wavelength L-band. To flatten the excessive response fluctuation of the double-pass scheme, we propose tuning one of the pumps to longer wavelengths incurring a small penalty of a slight reduction in the mean efficiency which can be compensated by increasing the input pump powers. We also show that to achieve the same amount of flatness, double-pass converters have a smaller efficiency penalty compared to the single-pass converters.
In this paper we measure the efficiency of photon pair production from parametric downconversion at the photon counting level, generated in a laboratory prototype of PPLN waveguide at 1572 nm. The aim is to enhance the brightness of an heralded single photon source and to improve compactness for quantum communication applications, namely quantum key distribution. We observed a maximum of the conversion efficiency corresponding to 7.9 106 photon pairs/s for a pump power of 28 μW. This value is compared with the measured pairs production in a classical experiment of difference frequency generation, realized with the same sample by analogue classical detection. We highlight the advantages of using the waveguide versus a bulk PPLN for such applications and we foresee further possible improvements by adopting waveguide in a single photon level experimental setup.
We report the single-to-multiple channel wavelength conversions of 1.57-ps pulses based on cascaded second-harmonic generation and difference frequency generation in quasi-phase-matched periodically poled lithium niobate waveguides. For single-to-single channel wavelength conversion, no external cavity laser is required with use of a fibre ring laser. The conversion efficiency is about -21.44 dB. The converted idler wavelength can be tuned from 1526.4 nm to 1537.5 nm as the lasing pump wavelength is varied from 1566.1 nm to 1555.0 nm. By employing several input pumps, tunable single-to-dual and single-to-triple channel wavelength conversions are experimentally demonstrated.