Erasures are more favorable for quantum sensing than unflagged errors such as Pauli errors. However, realistic sensing noise does not usually appear as erasures; it often acts within the same sensing Hilbert space as the signal, making it difficult to identify and mitigate. For such noise, we establish a noise-model-agnostic necessary and sufficient condition for erasure conversion, identifying the noise components that can be converted into erasures and removed without damaging the signal. For components satisfying the condition, conversion can be realized by a passive dimension-lifted scheme requiring neither detailed noise knowledge nor active control. Theoretically, the protocol remains effective over a broad range of noise strengths and approaches the corresponding precision limit. Experimentally, in single-photon phase sensing, we recover standard-quantum-limit precision in a Pauli-noise channel with erasure-convertible weight 0.5, using orbital angular momentum as the ancilla. These results provide a practical route to robust quantum sensing under realistic noise.
Recently, the delayed-choice quantum eraser has been applied for coherently excited superresolution using phase-controlled projection measurements of laser light to overcome the diffraction limit in classical physics as well as to solve the limited order N of the N00N state in quantum physics. Here, a general scheme of the phase-controlled quantum eraser-based superresolution is proposed for quantum sensing satisfying the Heisenberg limit, and its general solution is derived for an arbitrary Nth-order intensity correlation. Furthermore, phase quantization of the proposed superresolution is discussed to better understand the wave nature of quantum mechanics. Unlike other methods of superresolution in quantum sensing, the proposed method is for the intensity products between phase-controlled quantum erasers and thus is compatible with most conventional sensing metrologies.
Quantum enhanced sensing provides a powerful tool for the precise measurement of physical parameters that is applicable in many areas of science and technology. The achievable gain in sensitivity is largely limited by the influence of noise and decoherence. Here, we propose a paradigm of adiabatic quantum parameter amplification to overcome this limitation. We demonstrate that it allows to achieve generic robust quantum sensing, namely it is robust against noise that may even acting on the same degree of freedom as the field. Furthermore, the proposal achieves entanglement-free Heisenberg limit sensitivity that surpasses the limit of classical statistics.
Quantum sensors have been shown to enable more precise measurements than classical sensors. By using entanglement and coherent evolution, the estimation error can be made to scale better in interrogation time, photon count, and other resources, achieving Heisenberg-limited scaling. However, environmental noise and hardware errors typically destroy the coherence of the sensitive quantum states. This motivates the use of fault-tolerant techniques to create more robust quantum sensing protocols. Such fault-tolerant quantum sensing approaches have been shown to enhance sensitivity for qubit systems, but many practical sensors require bosonic probes. In this paper, we propose a fault-tolerant protocol using bosons to estimate displacements in the presence of dephasing noise. We construct an optimal error-correcting code under a mean photon-number constraint. Controlled displacements couple the probe to a repetition-encoded qubit register, while repeated boson-parity measurements and resets remove probe noise without erasing the stored logical phase. Under circuit-level bit-flip noise, a distance-
d code suppresses logical failures to order
p(d+1)/2. We show that, for a decay rate
γA, a total sensing time
T and a mean photon number budget
N, and for sufficiently small residual signals, the Fisher information scales as
NT2 over interrogation times of order
γA−(d+1)/2. This is a significant improvement over the non-fault-tolerant approach that achieves Heisenberg scaling only for a total time
O(γA−1).
Abstract Among the known resources of quantum metrology, one of the most practical and efficient is squeezing. Squeezed states of atoms and light improve the sensing of the phase, magnetic field, polarization, mechanical displacement. They promise to considerably increase signal-to-noise ratio in imaging and spectroscopy, and are already used in real-life gravitational-wave detectors. But despite being more robust than other states, they are still very fragile, which narrows the scope of their application. In particular, squeezed states are useless in measurements where the detection is inefficient or the noise is high. Here, we experimentally demonstrate a remedy against loss and noise: strong noiseless amplification before detection. This way, we achieve loss-tolerant operation of an interferometer fed with squeezed and coherent light. With only 50% detection efficiency and with noise exceeding the level of squeezed light more than 50 times, we overcome the shot-noise limit by 6 dB. Sub-shot-noise phase sensitivity survives up to 87% loss. Application of this technique to other types of optical sensing and imaging promises a full use of quantum resources in these fields.
Quantum parameter estimation is central to many fields such as quantum computation, communications and metrology. Optimal estimation theory has been instrumental in achieving the best accuracy in quantum parameter estimation, which is possible when we have very precise knowledge of and control over the model. However, uncertainties in key parameters underlying the system are unavoidable and may impact the quality of the estimate. We show here how quantum optical phase estimation of a squeezed state of light exhibits improvement when using a robust fixed-interval smoother designed with uncertainties explicitly introduced in parameters underlying the phase noise.