Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

A Cold-Atom Strapdown Inertial Unit Guided by the Transit Law

William Alexander Aldred

Published Nov 11, 2026• 1 citation
Publisher

Abstract

Inertial navigation integrates acceleration and rotation into position, and its accuracy is the accuracy of its sensors' biases. Atom interferometers measure both quantities against atomic constants, with biases that do not drift like those of mechanical or optical gyroscopes. This paper designs a strapdown cold-atom inertial unit and computes its sensitivity. With an interrogation time of 0.25 s and an atom flux of one million per shot, the acceleration sensitivity is 0.1 microgal per root hertz and the rotation sensitivity 9.94e-08 rad per second per root hertz. A transit-law scheduling scheme sequences the unit's measurements along the trajectory so that bias estimation and map aiding combine optimally. The unit is a simulated design; no atoms were interfered in its preparation.

DOI
10.5281/zenodo.24138415

Related papers

Atom Strapdown: Toward Integrated Quantum Inertial Navigation Systems

Benjamin Tennstedt, Ashwin Rajagopalan, Nicolai Ben Weddig +3 more

Abstract We present an alternative technique for estimating the response of a cold atom interferometer (CAI). Using data from a conventional inertial measurement unit (IMU) and common strapdown terminology, the position of the atom wave packet is tracked in a newly introduced sensor frame, enabling hybridization of both systems in terms of acceleration and angular rate measurements. The sensor frame allows for an easier mathematical description of the CAI measurement and integration into higher-level navigation systems. The dynamic terms resulting from the transformation of the IMU frame into the CAI sensor frame are evaluated in simulations. The implementation of the method as a prediction model in an extended Kalman filter is explained and demonstrated in realistic simulations, showing improvements of over two orders of magnitude with respect to the conventional IMU strapdown solution. Finally, the implications of these findings for future hybrid quantum navigation systems are discussed.

NAVIGATION Journal of the Institute of Navigation•Jan 1, 2023•15 citations

Navigation Error Analysis of Atom Interferometer Inertial Sensor

Christopher Jekeli

The recent development of the atom interferometer and its demonstration as an inertial sensor of acceleration and rotation rate augur a new generation of inertial navigation systems that would rival today's satellite navigation accuracy at the few-meter level. This paper reviews the principles of inertial measurement using the atom interferometer from a rudimentary viewpoint to illustrate the fundamentals and to highlight some of the potential shortcomings with a particular type, the cold-atom interferometer. One of these shortcomings is the fact that this interferometer requires a finite period of time during which the atoms are prepared (cooled) before they enter the interferometer and respond to its dynamics relative to an inertial frame. This lapse in the measurement duty cycle could be supplemented with very precise conventional inertial measurement units (IMUs), or eliminated with multiple, interleaved atom interferometers. Error analyses show that cold-atom interferometric IMUs that capture 50 percent of the dynamics must be coupled with conventional IMUs that are 50 times more accurate than typical navigation-grade units to sustain a horizontal position error of under 5 m (root mean square) after 1 h.

NAVIGATION Journal of the Institute of Navigation•Mar 1, 2005•107 citations

Quantum sensing of acceleration and rotation by interfering magnetically launched atoms

Clément Salducci, Yannick Bidel, Malo Cadoret +6 more

Accurate and stable measurement of inertial quantities is essential in geophysics, geodesy, fundamental physics, and inertial navigation. Here, we present an architecture for a compact cold-atom accelerometer-gyroscope based on a magnetically launched atom interferometer. Characterizing the launching technique, we demonstrate 700–parts per million gyroscope scale factor stability over 1 day, while acceleration and rotation rate bias stabilities of 7 × 10 −7 meters per second squared and 4 × 10 −7 radians per second are reached after 2 days of integration of the cold-atom sensor. Hybridizing it with a classical accelerometer and gyroscope, we correct their drift and bias to achieve respective 100-fold and 3-fold increase on the stability of the hybridized sensor compared to the classical ones. Compared to a state-of-the-art atomic gyroscope, the simplicity and scalability of our launching technique make this architecture easily extendable to a compact full six-axis inertial measurement unit, providing a pathway toward autonomous positioning and orientation using cold-atom sensors.

arXiv:2405.13689•Science Advances•Oct 30, 2024•42 citations

Development of compact cold-atom sensors for inertial navigation

Baptiste Battelier, B. Barrett, Lauriane Fouché +7 more

Inertial sensors based on cold atom interferometry exhibit many interesting features for applications related to inertial navigation, particularly in terms of sensitivity and long-term stability. However, at present the typical atom interferometer is still very much an experiment—consisting of a bulky, static apparatus with a limited dynamic range and high sensitivity to environmental effects. To be compliant with mobile applications further development is needed. In this work, we present a compact and mobile experiment, which we recently used to achieve the first inertial measurements with an atomic accelerometer onboard an aircraft. By integrating classical inertial sensors into our apparatus, we are able to operate the atomic sensor well beyond its standard operating range, corresponding to half of an interference fringe. We report atom-based acceleration measurements along both the horizontal and vertical axes of the aircraft with one-shot sensitivities of 2.3 × 10−4 g over a range of ∼ 0.1 g. The same technology can be used to develop cold-atom gyroscopes, which could surpass the best optical gyroscopes in terms of long-term sensitivity. Our apparatus was also designed to study multi-axis atom interferometry with the goal of realizing a full inertial measurement unit comprised of the three axes of acceleration and rotation. Finally, we present a compact and tunable laser system, which constitutes an essential part of any cold-atom-based sensor. The architecture of the laser is based on phase modulating a single fiber-optic laser diode, and can be tuned over a range of 1 GHz in less than 200 μs.

arXiv:1605.02454•Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Apr 29, 2016•84 citations

Cold Atom Interferometer as Inertial Measurement Unit for Precision Navigation

Christopher Jekeli

Recent technological advancements in atom interferometry have demonstrated extremely precise inertial measurements of acceleration and rotation. These could be used to develop ultra-precise inertial navigation systems that approach GPS navigation. The paper presents a rudimentary exposition of the interferometer which is based on beams of atoms cooled by lasers to a velocity of the order of 1 m/s and launched along two trajectories that re-combine, as in a classical interferometer. Using the dual wave-particle quantum mechanical properties of atoms, the differential phase of the interfering beams is indicative of inertial acceleration and rotation, similar to the Sagnac effect. Due to the much shorter wavelength of the atomic beam, the sensitivity is many orders of magnitude greater. Concluding analyses show that an inertial navigation system with 5/hr drift is technically possible.

•Jun 9, 2004•3 citations

Could cold atom interferometry sensors be the future inertial sensors? — First simulation results

Mohamed Bochkati, Steffen Schön, Dennis Schlippert +2 more

Quantum technology have attracted strong interest in recent years thanks to its extreme sensitivity to inertial forces and its strong immunity to drifts compared to conventional mechanical sensors. This paper introduces cold atom sensors as six-axis inertial sensors from the engineering point of view. In order to highlight the potential of this technology as needed for inertial navigation, a strapdown closed-loop-simulation has been developed. Furthermore, we present an error model for quantum sensors that includes terms such as quantum shot noise and phase noise of the reference laser. Considering this inherent stochastic characteristics, we made also a comparison with other conventional inertial measurement units. The analysis shows that quantum sensors with the same sensitivity as of for static measuring local gravity can determine their position with accuracy of one-meter level even after one hour, while other quantum sensors with less sensitivity exhibit for the same duration an amplitude up to 1 km, similar to conventional sensors.

DGON Inertial Sensors and Systems (ISS)•Sep 1, 2017•10 citations
Inertial navigation integrates acceleration and rotation into position, and its accuracy is the accuracy of its sensors' biases. Atom interferometers measure both quantities against atomic constants, with biases that do not drift like those of mechanical or optical gyroscopes. This paper designs a strapdown cold-atom inertial unit and computes its sensitivity. With an interrogation time of 0.25 s and an atom flux of one million per shot, the acceleration sensitivity is 0.1 microgal per root hertz and the rotation sensitivity 9.94e-08 rad per second per root hertz. A transit-law scheduling scheme sequences the unit's measurements along the trajectory so that bias estimation and map aiding combine optimally. The unit is a simulated design; no atoms were interfered in its preparation.
Abstract We present an alternative technique for estimating the response of a cold atom interferometer (CAI). Using data from a conventional inertial measurement unit (IMU) and common strapdown terminology, the position of the atom wave packet is tracked in a newly introduced sensor frame, enabling hybridization of both systems in terms of acceleration and angular rate measurements. The sensor frame allows for an easier mathematical description of the CAI measurement and integration into higher-level navigation systems. The dynamic terms resulting from the transformation of the IMU frame into the CAI sensor frame are evaluated in simulations. The implementation of the method as a prediction model in an extended Kalman filter is explained and demonstrated in realistic simulations, showing improvements of over two orders of magnitude with respect to the conventional IMU strapdown solution. Finally, the implications of these findings for future hybrid quantum navigation systems are discussed.
The recent development of the atom interferometer and its demonstration as an inertial sensor of acceleration and rotation rate augur a new generation of inertial navigation systems that would rival today's satellite navigation accuracy at the few-meter level. This paper reviews the principles of inertial measurement using the atom interferometer from a rudimentary viewpoint to illustrate the fundamentals and to highlight some of the potential shortcomings with a particular type, the cold-atom interferometer. One of these shortcomings is the fact that this interferometer requires a finite period of time during which the atoms are prepared (cooled) before they enter the interferometer and respond to its dynamics relative to an inertial frame. This lapse in the measurement duty cycle could be supplemented with very precise conventional inertial measurement units (IMUs), or eliminated with multiple, interleaved atom interferometers. Error analyses show that cold-atom interferometric IMUs that capture 50 percent of the dynamics must be coupled with conventional IMUs that are 50 times more accurate than typical navigation-grade units to sustain a horizontal position error of under 5 m (root mean square) after 1 h.
Accurate and stable measurement of inertial quantities is essential in geophysics, geodesy, fundamental physics, and inertial navigation. Here, we present an architecture for a compact cold-atom accelerometer-gyroscope based on a magnetically launched atom interferometer. Characterizing the launching technique, we demonstrate 700–parts per million gyroscope scale factor stability over 1 day, while acceleration and rotation rate bias stabilities of 7 × 10 −7 meters per second squared and 4 × 10 −7 radians per second are reached after 2 days of integration of the cold-atom sensor. Hybridizing it with a classical accelerometer and gyroscope, we correct their drift and bias to achieve respective 100-fold and 3-fold increase on the stability of the hybridized sensor compared to the classical ones. Compared to a state-of-the-art atomic gyroscope, the simplicity and scalability of our launching technique make this architecture easily extendable to a compact full six-axis inertial measurement unit, providing a pathway toward autonomous positioning and orientation using cold-atom sensors.
Inertial sensors based on cold atom interferometry exhibit many interesting features for applications related to inertial navigation, particularly in terms of sensitivity and long-term stability. However, at present the typical atom interferometer is still very much an experiment—consisting of a bulky, static apparatus with a limited dynamic range and high sensitivity to environmental effects. To be compliant with mobile applications further development is needed. In this work, we present a compact and mobile experiment, which we recently used to achieve the first inertial measurements with an atomic accelerometer onboard an aircraft. By integrating classical inertial sensors into our apparatus, we are able to operate the atomic sensor well beyond its standard operating range, corresponding to half of an interference fringe. We report atom-based acceleration measurements along both the horizontal and vertical axes of the aircraft with one-shot sensitivities of 2.3 × 10−4 g over a range of ∼ 0.1 g. The same technology can be used to develop cold-atom gyroscopes, which could surpass the best optical gyroscopes in terms of long-term sensitivity. Our apparatus was also designed to study multi-axis atom interferometry with the goal of realizing a full inertial measurement unit comprised of the three axes of acceleration and rotation. Finally, we present a compact and tunable laser system, which constitutes an essential part of any cold-atom-based sensor. The architecture of the laser is based on phase modulating a single fiber-optic laser diode, and can be tuned over a range of 1 GHz in less than 200 μs.
Recent technological advancements in atom interferometry have demonstrated extremely precise inertial measurements of acceleration and rotation. These could be used to develop ultra-precise inertial navigation systems that approach GPS navigation. The paper presents a rudimentary exposition of the interferometer which is based on beams of atoms cooled by lasers to a velocity of the order of 1 m/s and launched along two trajectories that re-combine, as in a classical interferometer. Using the dual wave-particle quantum mechanical properties of atoms, the differential phase of the interfering beams is indicative of inertial acceleration and rotation, similar to the Sagnac effect. Due to the much shorter wavelength of the atomic beam, the sensitivity is many orders of magnitude greater. Concluding analyses show that an inertial navigation system with 5/hr drift is technically possible.
Quantum technology have attracted strong interest in recent years thanks to its extreme sensitivity to inertial forces and its strong immunity to drifts compared to conventional mechanical sensors. This paper introduces cold atom sensors as six-axis inertial sensors from the engineering point of view. In order to highlight the potential of this technology as needed for inertial navigation, a strapdown closed-loop-simulation has been developed. Furthermore, we present an error model for quantum sensors that includes terms such as quantum shot noise and phase noise of the reference laser. Considering this inherent stochastic characteristics, we made also a comparison with other conventional inertial measurement units. The analysis shows that quantum sensors with the same sensitivity as of for static measuring local gravity can determine their position with accuracy of one-meter level even after one hour, while other quantum sensors with less sensitivity exhibit for the same duration an amplitude up to 1 km, similar to conventional sensors.