Benchmarking a Hardware-Efficient Variational Quantum Eigensolver for Ground-State Energies and Potential Energy Curves of Nine Small Molecules against Exact Active-Space and Full Configuration Interaction References
Abstract The variational quantum eigensolver (VQE) is the leading near-term quantum algorithm for molecular ground states, but its accuracy is often reported with inconsistent reference values and metrics. We present a reproducible benchmark of a hardware-efficient VQE ansatz (R Y –R Z rotations with linear CNOT entanglement) for H 2 , HeH + , LiH, BeH 2 , H 2 O, NH 3 , CH 4 , CO 2 and N 2 in the STO-3G basis. Hamiltonians were generated with PySCF and Qiskit Nature, encoded with the parity mapping and two-qubit reduction on 2, 4 or 6 qubits, and minimised with SLSQP and analytic gradients in noiseless statevector simulations, with a penalty term enforcing the correct electron number. Energies are compared with exact active-space (CASCI) and all-electron full configuration interaction (FCI) references in the same basis, at experimental geometries and along potential energy curves (144 geometries in total). For the two- and four-qubit systems, VQE reproduces the exact energies, potential energy curves, bond lengths and harmonic frequencies to numerical precision. For the six-qubit systems the equilibrium errors are 0.3–7.5 mE h and reach 51.1 mE h along the curves, so chemical accuracy (1.6 mE h ) is reached only for H 2 O and CH 4 ; increasing the depth to reps = 4–6 (20–30 CNOTs) restores chemical accuracy at equilibrium, and UCCSD reaches chemical accuracy for all nine molecules but requires 476 instead of 15 CNOT gates. Active-space truncation errors (1–139 mE h ) exceed the VQE errors, and deviations of STO-3G bond lengths from experiment (up to 0.14 Å) are basis-set effects shared by FCI. The results show why VQE errors should be reported in absolute terms against exact references for the same Hamiltonian, and they provide a baseline for evaluating noise-aware and symmetry-preserving ansätze.
Abstract The variational quantum eigensolver (VQE) is the leading near-term quantum algorithm for molecular ground states, but its accuracy is often reported with inconsistent reference values and metrics. We present a reproducible benchmark of a hardware-efficient VQE ansatz (R Y –R Z rotations with linear CNOT entanglement) for H 2 , HeH + , LiH, BeH 2 , H 2 O, NH 3 , CH 4 , CO 2 and N 2 in the STO-3G basis. Hamiltonians were generated with PySCF and Qiskit Nature, encoded with the parity mapping and two-qubit reduction on 2, 4 or 6 qubits, and minimised with SLSQP and analytic gradients in noiseless statevector simulations, with a penalty term enforcing the correct electron number. Energies are compared with exact active-space (CASCI) and all-electron full configuration interaction (FCI) references in the same basis, at experimental geometries and along potential energy curves (144 geometries in total). For the two- and four-qubit systems, VQE reproduces the exact energies, potential energy curves, bond lengths and harmonic frequencies to numerical precision. For the six-qubit systems the equilibrium errors are 0.3–7.5 mE h and reach 51.1 mE h along the curves, so chemical accuracy (1.6 mE h ) is reached only for H 2 O and CH 4 ; increasing the depth to reps = 4–6 (20–30 CNOTs) restores chemical accuracy at equilibrium, and UCCSD reaches chemical accuracy for all nine molecules but requires 476 instead of 15 CNOT gates. Active-space truncation errors (1–139 mE h ) exceed the VQE errors, and deviations of STO-3G bond lengths from experiment (up to 0.14 Å) are basis-set effects shared by FCI. The results show why VQE errors should be reported in absolute terms against exact references for the same Hamiltonian, and they provide a baseline for evaluating noise-aware and symmetry-preserving ansätze.
Abstract The variational quantum Eigensolver (VQE) provides a scalable route to molecular ground-state energies on near-term quantum hardware, but its accuracy degrades rapidly as system size grows because hardware-efficient ansätze cannot span the full correlation subspace. We introduce a physics-informed ridge regression correction that is trained on the difference between VQE and Hartree–Fock (HF) energies and applied as a postprocessing step requiring no additional quantum resources. The feature set─the VQE–HF energy gap ΔE, its square ΔE2, the active-space qubit count, the number of active electrons, and two cross-term interactions─captures the dominant drivers of ansatz error in a low-dimensional, interpretable form. The model is benchmarked on H2, H2O, NH3, CH4, C2H6, and CH3OH using the STO-3G basis set and a state vector VQE simulator using a two-layer Ry-CNOT hardware-efficient ansatz. To assess cross-molecule generalizability, the corrected framework is further tested on CO2, N2, and HCN under both untrained and trained conditions. Absolute energy errors fall from a range of 0.02–0.79 Ha (raw VQE) to 0.0007–0.094 Ha after correction, corresponding to improvement factors of 3× to 640× relative to CASCI reference values. Zero-shot generalization tests yield factors of 9–58×, and including molecules in training improves results by a further order of magnitude in several cases. The three extended molecules exhibit improvement factors of 4–6× in untrained settings and 5–6× after training, providing preliminary evidence of transferability across chemically distinct systems. These findings suggest that the VQE–HF energy gap encodes physically transferable information about correlation-energy saturation, and that even the smallest training set can produce practically useful corrections for near-term quantum chemistry.
Abstract We present a comprehensive quantum chemical study of nine molecules H₂, HeH⁺, LiH, BeH₂, H₂O, NH₃, CH₄, CO₂, and N₂ using the Variational Quantum Eigensolver (VQE) algorithm implemented in Qiskit 2.4.1. Molecular Hamiltonians are constructed in the STO-3G minimal basis set, transformed to qubit operators via the Jordan-Wigner mapping, and optimized using the n-local hardware-efficient ansatz with the SLSQP optimizer. Ground state energies are benchmarked against Full Configuration Interaction (FCI)/STO-3G reference values from authoritative literature sources. VQE achieves accuracies from 96.46% (HeH⁺) to 99.99% (H₂), average 98.68%. Potential energy surfaces are generated for all nine molecules and compared with high level ab initio literature PES references including the Kolos-Wolniewicz H₂ curve, the Polyansky water surface, and the Bytautas-Ruedenberg N₂ FCI surface. Equilibrium bond lengths agree with experiment to within 0.000–0.006 Å. Quantum ansatz circuits are analyzed in detail for all molecules. These results confirm the viability of near-term VQE algorithms for molecular quantum chemistry across diverse bond types and geometries.
This study investigates the Variational Quantum Eigensolver (VQE), a hybrid quantum-classical algorithm that partitions the computational workload between a quantum processing unit and a classical optimiser to determine the ground-state energies of molecular systems. The Qiskit SDK v1.x framework is employed, utilising the PySCFDriver module within the qiskit-nature package to construct second-quantised molecular electronic Hamiltonians for two representative systems: Hydrogen ( ) and Lithium Hydride ( ). For the complete active space is retained without spatial reduction, mapping the full Hamiltonian onto a 4-qubit register. However for the full STO-3G representation demands 12 qubits, rendering direct classical parameter optimisation computationally intractable. This bottleneck is resolved by applying an ActiveSpaceTransformer (num_electrons=2, num_spatial_orbitals=3) to freeze the chemically inactive lithium core electrons, reducing the active register to 6 qubits. Fermionic operators are subsequently converted to Pauli strings via the Jordan-Wigner transformation ( ) enabling the quantum processor to evaluate the molecular Hamiltonian as a circuit while preserving the fermionic anti-commutation relations. Under ideal, noise-free simulation using the StatevectorEstimator primitive paired with the COBYLA optimiser (maxiter=200), all VQE energy points converge precisely onto the Full Configuration Interaction (FCI) classical baseline across the full range of interatomic separations. This confirms that the hardware-efficient TwoLocal ansatz ( rotation layers and entanglement layers with reps=3) possesses sufficient expressive power to capture the molecular ground-state wavefunction. Introducing gate-level noise through AerSimulator backends calibrated from the FakeManilaV2 and FakeNairobiV2 hardware profiles—with optimisation driven by the SPSA algorithm (maxiter=150)—reveals two critical failure modes. A systematic upward energy bias is observed, attributable to depolarising gate errors and measurement readout faults that prevent the optimiser from reaching the true minimum energy eigenvalue. Additionally, severe stochastic oscillations between 1.0 Å and 1.5 Å on the curve induce premature convergence of the SPSA optimiser to spurious local minima. These results demonstrate that unmitigated hardware noise renders VQE incapable of reliably predicting equilibrium bond lengths on current NISQ devices, motivating the future integration of Zero-Noise Extrapolation (ZNE), readout error mitigation, and Virtual Distillation into the computational pipeline. Keywords—Variational Quantum Eigensolver (VQE); Qiskit 1.x; Potential Energy Curve; Molecular Ground-State Energy; Hardware-Efficient Ansatz; Gate-Level Noise Simulation; ActiveSpaceTransformer; NISQ Devices.
Abstract Finding the ground-state energy of molecules is an important and challenging computational problem for which quantum computing can potentially find efficient solutions. The variational quantum eigensolver (VQE) is a quantum algorithm that tackles the molecular groundstate problem and is regarded as one of the flagships of quantum computing. Yet, to date, only very small molecules were computed via VQE, due to high noise levels in current quantum devices. Here we present an alternative variational quantum scheme that requires significantly less qubits than VQE. The reduction in the qubit number allows for shallower circuits to be sufficient, rendering the method more resistant to noise. The proposed algorithm, termed variational quantum selected-configuration-interaction (VQ-SCI), is based on: (a) representing the target groundstate as a superposition of Slater determinant configurations, encoded directly upon the quantum computational basis states; and (b) selecting a-priory only the most dominant configurations. This is demonstrated through a set of groundstate calculations of the H2, LiH, BeH2, H2O, NH3 and C2H4 molecules in the sto-3g basis set, performed on IBM quantum devices. We show that the VQ-SCI reaches the full configuration interaction energy within chemical accuracy using the lowest number of qubits reported to date. Moreover, when the SCI matrix is generated ‘on the fly’, the VQ-SCI requires exponentially less memory than classical SCI methods. This offers a potential remedy to a severe memory bottleneck problem in classical SCI calculations. Finally, the proposed scheme is general and can be straightforwardly applied for finding the groundstate of any Hermitian matrix, outside the chemical context.
Assessment of the variational quantum eigensolver (VQE) for bond dissociation of H2, H3+, and CH5+
Abstract Context The variational quantum eigensolver (VQE) is a quantum-classical algorithm for estimating molecular ground-state energies. However, the accuracy depends on the choice of ansatz , active space, and initial variational parameters. Hence, it is relevant to perform assessments of VQE. The dissociation profiles of H 2 2 , H 3+ 3 + , and CH 5+ 5 + were chosen for these assessments. For H 2 2 and H 3+ 3 + , the UCCSD, GateFabric, and k -UpCCGSD ansätze reproduced the dissociation profiles with high accuracy. For CH 5+ 5 + , GateFabric and k -UpCCGSD provided the best compromise between accuracy and scalability. Hardware-efficient ansätze (HEA), particularly HEA-A and HEA-B, produced significant deviations from the reference energies. The results also demonstrate that larger numbers of parameters or logic gates do not necessarily improve VQE performance. Furthermore, some ansätze , especially GRSD and EHA, showed sensitivity to the initialization of the parameters. Methods Reference geometries and energies were obtained at the CISD/STO-3 G level using Gaussian 09. VQE simulations were performed with the PennyLane library employing the Jordan-Wigner mapping. The ansätze evaluated were UCCSD, k -UpCCGSD, GateFabric, GRSD, HEA-A, HEA-B, HEA-C, and Entanglement-variational Hardware-efficient Ansatz (EHA). Dissociation profiles were generated by varying interatomic distances and angular coordinates for H 2 2 and H 3+ 3 + , as well as the C-H 2 2 dissociation coordinate for CH 5+ 5 + . Active-space ranging from 2/2 to 8/8 electrons/orbitals was employed for CH 5+ 5 + . Variational parameters were optimized using stochastic gradient descent with a convergence threshold of 1×10−6 1 × 10
Classical simulation of molecular electronic structure is often limited by the rapid increase in computational cost associated with describing electron correlation. The Variational Quantum Eigensolver (VQE) is one hybrid quantum-classical approach ideally adapted to the Noisy Intermediate-Scale Quantum (NISQ) regime. This work applies the VQE algorithm to compute ground state energies of a set of molecules:H2,H3+,LiH,HF,OH−,H2O,BH3,CH4, andNH3. The approach utilizes the Unitary Coupled Cluster for Single and Double excitations (UCCSD) ansatz along with the Bravyi-Kitaev transformation for fermionic-to-qubit encoding. Quantum simulation outputs are systematically benchmarked against Full Configuration Interaction (FCI), a numerically exact traditional approach, and Unrestricted Hartree-Fock (UHF). The results establish a robust consistency of the VQE-obtained molecular ground state energies against standard FCI and UHF benchmarks. This research provides a critical benchmark, confirming that VQE has the capability for high-precision molecular simulations and playing the role of a pivotal stepping stone toward revolutionizing applications in drug discovery and materials science.