This paper addresses the unresolved question of how the energy of a photon is processed when electronic excitation fails. Standard quantum mechanics describes successful excitation as a transition between eigenstates, but provides no systematic account of the internal energy handling when the transition does not occur. To examine this gap, a simple comparative experiment is proposed. Two types of photons---one near the excitation threshold and one far below it---are irradiated onto the same material, and the difference in absorbed energy is measured. The standard theory predicts no difference. The present prediction asserts that a non-zero difference will appear due to partial excitationprocesses occurring even when the final transition fails. The result is binary: either the standard theory is correct, or this prediction is correct. If the experiment is not performed, the prediction remains an unfalsified theory concerning energy processing in failed excitation. 本稿は、量子励起における「励起失敗時のエネルギーの行方」という、公式量子力学が体系的説明を持たない領域に対し、比較実験による検証可能な予想を提示するものである。 量子励起は通常、固有状態間の遷移として記述され、遷移が起こらない場合(励起失敗)には「励起しない」という結果のみが与えられる。しかし、励起を試みた光子が電子に与えたエネルギーがどのように処理されるかについて、公式理論は明確な記述を持たない。 本稿では、励起失敗時のエネルギー収支を比較することで、この未解決問題を検証すべきであると主張する。実験は簡便であり、同一素材に対して異なる周波数の光子を照射し、光エネルギーの吸収差を測定する比較実験とする。 もし本実験が実施されない場合、本予想は「励起失敗時のエネルギー処理に関する正統な未反証理論」として位置づけられる。 実験の詳細については本文に記述する。
This paper addresses the unresolved question of how the energy of a photon is processed when electronic excitation fails. Standard quantum mechanics describes successful excitation as a transition between eigenstates, but provides no systematic account of the internal energy handling when the transition does not occur. To examine this gap, a simple comparative experiment is proposed. Two types of photons---one near the excitation threshold and one far below it---are irradiated onto the same material, and the difference in absorbed energy is measured. The standard theory predicts no difference. The present prediction asserts that a non-zero difference will appear due to partial excitationprocesses occurring even when the final transition fails. The result is binary: either the standard theory is correct, or this prediction is correct. If the experiment is not performed, the prediction remains an unfalsified theory concerning energy processing in failed excitation. 本稿は、量子励起における「励起失敗時のエネルギーの行方」という、公式量子力学が体系的説明を持たない領域に対し、比較実験による検証可能な予想を提示するものである。 量子励起は通常、固有状態間の遷移として記述され、遷移が起こらない場合(励起失敗)には「励起しない」という結果のみが与えられる。しかし、励起を試みた光子が電子に与えたエネルギーがどのように処理されるかについて、公式理論は明確な記述を持たない。 本稿では、励起失敗時のエネルギー収支を比較することで、この未解決問題を検証すべきであると主張する。実験は簡便であり、同一素材に対して異なる周波数の光子を照射し、光エネルギーの吸収差を測定する比較実験とする。 もし本実験が実施されない場合、本予想は「励起失敗時のエネルギー処理に関する正統な未反証理論」として位置づけられる。 実験の詳細については本文に記述する。
Light emission occurs as a result of interaction between light and matter. Let us assume a two-level atom with levels 1 (ground state) and 2 (excited state). The energies of the ground and excited states are E 1 and E 2 , respectively, and the energy difference is therefore given by the difference ΔE 12 =E 2 −E 1 . When light with photons of energy equal to this difference is absorbed by the atomic or molecular system, an electron will be excited from level 1 to level 2. The energy of the photons is given by ΔE 12 =E 12 =hν 12 (h is Planck's constant and 1→2 is the frequency of light resulting from the level 1→2 transition). This energy is absorbed by an atom or a molecule that has energy levels, separated by ΔE, where these energy levels are the ground and the excited states. This kind of “quantum jump” of an electron between two states occurs in atomic systems between electronic levels; it can be extended to molecular systems, where vibrational and translational energy levels participate in the quantum jump. The interaction between light and matter involves the transition of electrons between different states. This interaction results in the absorption of photons (stimulated absorption) as well as spontaneous and stimulated emission. These processes can be described using Einstein's A and B coefficients, as will be described in the next paragraphs.
A conceptual model is developed for the processes of photon emission and absorption. While the emission of light is well known in terms of quantum changes in energy levels of an electron, the fundamental physical processes are incompletely understood. How exactly does the photon emerge from the electron? How is light absorbed by matter? These foundational conceptual questions are the focus of this paper. We show that it is possible to develop new insights into this problem, based on the cordus model, which is a non-local hidden-variable solution. We start by predicting the structures of the photon and electron, both the internal geometric substructures, and their discrete fields. The model predicts that there are different mechanisms for the fields of the photon and electron, and uses this to explain the characteristics of the evanescent and electric fields. We then show how the bonding constraints arise on the electron, and how these require the electron to emit its excess energy. The process whereby a photon is created and separated out of the electron is identified. Photon emission and absorption thus result from an interaction between the discrete field elements and the internal structures. Emission is thus an escapement mechanism whereby matter particules that are overprescribed in position can get rid of that energy.
Until now, our discussion of the interaction between radiation and matter has concentrated only on the spectral aspects of radiation. The results could determine the wavelengths for absorption and emission or the selection rules for such transitions, but could not be used to determine the actual extent of emission or absorption. These too are important considerations which are needed to fully quantify radiative energy transfer. Unfortunately, none of the classical theories can predict the extent of emission from an excited medium, or even the extent of absorption. Although the discussion in Section 4.9 (on the propagation of electromagnetic waves through lossy media) touched briefly on the concept of attenuation by absorption, it failed to show the reasons for the spectral properties of the absorption or to accurately predict its extent. We will see later that the classical results are useful only as a benchmark against which the actual absorber is compared. The objective of this chapter is therefore to present an introduction to quantum mechanical processes that control the emission and absorption by microscopic systems consisting of atoms and molecules. The results will then be used to predict the extent of emission by media when excited by an external energy source and to evaluate the absorption of incident radiation.
The absorption of light is one of the most fundamental processes in condensed-matter physics and optics. Here we investigate under which conditions laser light is absorbed by a crystalline material as an electromagnetic wave with delocalized properties or rather as photons that cause discrete, localized, nanometer-sized consequences. We excite the first-order phase transition of vanadium dioxide with laser pulses of sufficient frequency to overcome the band gap but with insufficient pulse energy to overcome the latent heat. According to Maxwell's equations and Bloch theory, no transition should occur, because nowhere in the material is enough energy. Nevertheless, we observe with ultrafast electron diffraction a disordered crystal geometry with nanometer-sized spots of switched material that grow and diminish with time. The amount of localized spots matches approximately to the number of photons in the absorbed laser wave. Two optical experiments substantiate this phenomenon, and simulations reproduce all measurements results. We discuss whether crystals defects, temperature, or a genuine wavefunction collapse can explain the discovered phenomenon. Practically, the reported absorption mechanism enables local consequences at substantially higher energy than average and provides insight into symmetry breaks and non-thermal fluctuations within complex materials.
Since its discovery, quantum theory has proven to be one of the most precise theories ever made. Measurement processes, however, do not seem to be governed by the unitary law of quantum mechanics, and one can ask if the theory is complete. To answer this question, new experiments must be done regarding the nature of quantum measurements. Here, we propose a direct consequence of projective measurements, leading to three possibilities. An arbitrarily high amount of energy can be either extracted or absorbed, or else energy conservation cannot be accounted by usual arguments based upon standard quantum mechanics.
The absorbed/emitted radiation will be treated classically, as a monochromatic plane wave, whereas the atomic system that can absorb/emit such radiation will be described quantum-mechanically. However, no incident radiation beam is needed, and the atom “falls down” after a certain time interval to the ground state without any external reason. In the spontaneous emission processes the emitting atom can be thought of as a classical oscillating dipole, whose amplitude decreases due to the energy loss through the radiation. If an ensemble of identical atoms is considered and if, for simplicity, each atom emits radiation with the same spectral shape and full width at half maximum, it is impossible to ascribe a definite spectral component with intensity to a definite atom. In this case, such a broadening is identical for all atoms in the ensemble. On the microscopic scale, absorption of radiation is reduced to the transitions between pairs of energy levels of a discrete atomic spectrum.