Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

CRC Press eBooks

Lithium Doppler-free absorption spectroscopy

Ignacio E. Olivares

Published Nov 6, 2026• 0 citations
Publisher

Abstract

This chapter is dedicated to the spectroscopic investigation of the lithium https://www.w3.org/1998/Math/MathML" display="inline"> 2 s − 2 p atomic transitions. To analyze the spectral features within a lithium vapor mixed with argon buffer gas, we employed a Doppler-free saturation spectroscopy technique enhanced by amplitude modulation. The experimental setup utilized a tunable diode laser to probe the atomic resonances.

DOI
10.1201/9781003558538-6

Related papers

Saturated Absorption Spectroscopy

Will Raven

Abstract In this chapter, we explore the clever spectroscopy technique known as saturated absorption spectroscopy. This technique is used to remove Doppler profiles from spectroscopic signals. We will learn how saturated absorption spectroscopy works, including the roles of probe and pump beams, and the resulting spectral features. Additionally, we will examine the artifacts, specifically crossover features (V , $$\Lambda $$ Λ , and X crossovers), that may appear due to this technique and understand the conditions under which they occur. Practical examples using various atoms, advanced techniques for achieving crossover-free spectroscopy, and potential issues are also discussed.

Springer eBooks•Oct 17, 2024•0 citations

Diode Laser Atomic Spectroscopy

R. N. Compton, Michael A. Duncan

Abstract Experiments using relatively inexpensive tunable diode lasers are used to study high-resolution absorption spectroscopy in alkali vapor. Direct absorption spectra for cesium and rubidium show adsorption profiles that are Doppler-broadened. A second experiment demonstrates saturated adsorption spectroscopy to remove Doppler broadening in atomic spectroscopy for rubidium atoms in a cell at room temperature. Lamb dips are seen in the Doppler-broadened profiles. Finally, a third experiment is described which demonstrates Doppler-free two-photon spectroscopy for rubidium vapor. All of these experiments were historical stepping stones toward the creation of a Bose–Einstein condensate.

Oxford University Press eBooks•Nov 27, 2024•0 citations

Diode Laser Atomic Spectroscopy

R. N. Compton, Michael A. Duncan

Experiments using relatively inexpensive tunable diode lasers are used to study high-resolution absorption spectroscopy in alkali vapors. Direct absorption spectra for cesium and rubidium show adsorption profiles that are Doppler-broadened. A second experiment demonstrates saturated adsorption spectroscopy to remove Doppler broadening in atomic spectroscopy for rubidium atoms in a cell at room temperature. Lamb dips are seen in the Doppler-broadened profiles. Finally a third experiment is described which demonstrate Doppler-free two photon spectroscopy for rubidium vapour. All of these experiments were historical stepping stones toward the creation of a Bose–Einstein condensate.

Oxford University Press eBooks•Nov 1, 2015•0 citations

Comparison of absorption, fluorescence, and polarization spectroscopy of atomic rubidium

Seth Ashman, C. Stifler, Joaquín Romero

An ongoing spectroscopic investigation of atomic rubidium utilizes a two-photon, single-laser excitation process. Transitions accessible with our tunable laser include 5P1/2 (F ′ ) ← 5S1/2 (F) and 5P3/2 (F ′ ) ← 5S1/2 (F). The laser is split into a pump and probe beam to allow for Doppler-free measurements of transitions between hyperfine levels. The pump and probe beams are overlapped in a counter-propagating geometry and the laser frequency scans over a transition. Absorption, fluorescence and polarization spectroscopy techniques are applied to this basic experimental setup. The temperature of the vapor cell and the power of the pump and probe beams have been varied to explore line broadening effects and signal-to-noise of each technique. This humble setup will hopefully grow into a more robust experimental arrangement in which double resonance, two-laser excitations are used to explore hyperfine state changing collisions between rubidium atoms and noble gas atoms. Rb-noble gas collisions can transfer population between hyperfine levels, such as 5P3/2 (F ′ = 3) Collision ←− 5P3/2 (F ′ = 2), and the probe beam couples 7S1/2 (F ′′ = 2) ← 5P3/2 (F ′ = 3). Polarization spectroscopy signal depends on the rate of population transfer due to the collision as well as maintaining the orientation created by the pump laser. Fluorescence spectroscopy relies only on transfer of population due to the collision. Comparison of these techniques yields information regarding the change of the magnetic sublevels, mF , during hyperfine state changing collisions.

Bulletin of the American Physical Society•Jun 11, 2015•0 citations

Nonlinear spectroscopy of rubidium: an undergraduate experiment

V. Jacques, B Hingant, A. Allafort +2 more

In this paper, we describe two complementary nonlinear spectroscopy methods which both allow one to achieve Doppler-free spectra of atomic gases. First, saturated absorption spectroscopy is used to investigate the structure of the 5S 1/2 → 5P 3/2 transition in rubidium. Using a slightly modified experimental setup, Doppler-free two-photon absorption spectroscopy is then performed on the 5S 1/2 → 5D 5/2 transition in rubidium, leading to accurate measurements of the hyperfine structure of the 5D 5/2 energy level. In addition, electric dipole selection rules of the two-photon transition are investigated, first by modifying the polarization of the excitation laser, and then by measuring two-photon absorption spectra when a magnetic field is applied close to the rubidium vapour. All experiments are performed with the same grating-feedback laser diode, providing an opportunity to compare different high-resolution spectroscopy methods using a single experimental setup. Such experiments may acquaint students with quantum mechanics selection rules, atomic spectra and Zeeman effect.

arXiv:0902.3115•European Journal of Physics•Jul 8, 2009•23 citations

Nonlinear Doppler-free spectroscopy of atoms near a surface

Pierre Simoneau, S. Le Boiteux, C. De Araujo +2 more

Up to now, Doppler-free nonlinear spectroscopy has been applied to atoms inside a gas medium (volume spectroscopy). We have extended these methods to atoms in the vicinity of a surface. The basic principle consists of monitoring reflectivity changes produced when a laser beam, incident on a glass–vapor interface, is brought into resonance with an atomic transition. For Doppler-free spectroscopy, two counterpropagating beams are used to operate velocity selection. If these two beams are under normal incidence in the glass—velocity selection perpendicular to the surface—one observes saturated dispersion (selective reflection sensitive to the real index). For incidence angles in the glass (prism) larger than the critical angle (total internal reflection), a standing evanescent wave is produced in the gas (velocity selection along the surface), and saturated absorption is detected. Experimental demonstration was performed on the Na resonance line; high sensitivity (10−4 relative reflectivity change) and spectral resolution as good as 20 MHz were obtained. The main limitation to better resolution comes from the short atomic transit time in the evanescent wave (typical extension ~λ). Relevant applications of these techniques should also concern the diagnostics of optically thick media, as analysis of interaction between gas-phase atoms and the surface, notably atom–wall collisions, and modification of the spontaneous emission characteristics.

International Laser Science Conference•Jan 1, 1986•0 citations
This chapter is dedicated to the spectroscopic investigation of the lithium https://www.w3.org/1998/Math/MathML" display="inline"> 2 s − 2 p atomic transitions. To analyze the spectral features within a lithium vapor mixed with argon buffer gas, we employed a Doppler-free saturation spectroscopy technique enhanced by amplitude modulation. The experimental setup utilized a tunable diode laser to probe the atomic resonances.
Abstract In this chapter, we explore the clever spectroscopy technique known as saturated absorption spectroscopy. This technique is used to remove Doppler profiles from spectroscopic signals. We will learn how saturated absorption spectroscopy works, including the roles of probe and pump beams, and the resulting spectral features. Additionally, we will examine the artifacts, specifically crossover features (V , Λ\Lambda Λ Λ , and X crossovers), that may appear due to this technique and understand the conditions under which they occur. Practical examples using various atoms, advanced techniques for achieving crossover-free spectroscopy, and potential issues are also discussed.
Abstract Experiments using relatively inexpensive tunable diode lasers are used to study high-resolution absorption spectroscopy in alkali vapor. Direct absorption spectra for cesium and rubidium show adsorption profiles that are Doppler-broadened. A second experiment demonstrates saturated adsorption spectroscopy to remove Doppler broadening in atomic spectroscopy for rubidium atoms in a cell at room temperature. Lamb dips are seen in the Doppler-broadened profiles. Finally, a third experiment is described which demonstrates Doppler-free two-photon spectroscopy for rubidium vapor. All of these experiments were historical stepping stones toward the creation of a Bose–Einstein condensate.
Experiments using relatively inexpensive tunable diode lasers are used to study high-resolution absorption spectroscopy in alkali vapors. Direct absorption spectra for cesium and rubidium show adsorption profiles that are Doppler-broadened. A second experiment demonstrates saturated adsorption spectroscopy to remove Doppler broadening in atomic spectroscopy for rubidium atoms in a cell at room temperature. Lamb dips are seen in the Doppler-broadened profiles. Finally a third experiment is described which demonstrate Doppler-free two photon spectroscopy for rubidium vapour. All of these experiments were historical stepping stones toward the creation of a Bose–Einstein condensate.
An ongoing spectroscopic investigation of atomic rubidium utilizes a two-photon, single-laser excitation process. Transitions accessible with our tunable laser include 5P1/2 (F ′ ) ← 5S1/2 (F) and 5P3/2 (F ′ ) ← 5S1/2 (F). The laser is split into a pump and probe beam to allow for Doppler-free measurements of transitions between hyperfine levels. The pump and probe beams are overlapped in a counter-propagating geometry and the laser frequency scans over a transition. Absorption, fluorescence and polarization spectroscopy techniques are applied to this basic experimental setup. The temperature of the vapor cell and the power of the pump and probe beams have been varied to explore line broadening effects and signal-to-noise of each technique. This humble setup will hopefully grow into a more robust experimental arrangement in which double resonance, two-laser excitations are used to explore hyperfine state changing collisions between rubidium atoms and noble gas atoms. Rb-noble gas collisions can transfer population between hyperfine levels, such as 5P3/2 (F ′ = 3) Collision ←− 5P3/2 (F ′ = 2), and the probe beam couples 7S1/2 (F ′′ = 2) ← 5P3/2 (F ′ = 3). Polarization spectroscopy signal depends on the rate of population transfer due to the collision as well as maintaining the orientation created by the pump laser. Fluorescence spectroscopy relies only on transfer of population due to the collision. Comparison of these techniques yields information regarding the change of the magnetic sublevels, mF , during hyperfine state changing collisions.
In this paper, we describe two complementary nonlinear spectroscopy methods which both allow one to achieve Doppler-free spectra of atomic gases. First, saturated absorption spectroscopy is used to investigate the structure of the 5S 1/2 → 5P 3/2 transition in rubidium. Using a slightly modified experimental setup, Doppler-free two-photon absorption spectroscopy is then performed on the 5S 1/2 → 5D 5/2 transition in rubidium, leading to accurate measurements of the hyperfine structure of the 5D 5/2 energy level. In addition, electric dipole selection rules of the two-photon transition are investigated, first by modifying the polarization of the excitation laser, and then by measuring two-photon absorption spectra when a magnetic field is applied close to the rubidium vapour. All experiments are performed with the same grating-feedback laser diode, providing an opportunity to compare different high-resolution spectroscopy methods using a single experimental setup. Such experiments may acquaint students with quantum mechanics selection rules, atomic spectra and Zeeman effect.
Up to now, Doppler-free nonlinear spectroscopy has been applied to atoms inside a gas medium (volume spectroscopy). We have extended these methods to atoms in the vicinity of a surface. The basic principle consists of monitoring reflectivity changes produced when a laser beam, incident on a glass–vapor interface, is brought into resonance with an atomic transition. For Doppler-free spectroscopy, two counterpropagating beams are used to operate velocity selection. If these two beams are under normal incidence in the glass—velocity selection perpendicular to the surface—one observes saturated dispersion (selective reflection sensitive to the real index). For incidence angles in the glass (prism) larger than the critical angle (total internal reflection), a standing evanescent wave is produced in the gas (velocity selection along the surface), and saturated absorption is detected. Experimental demonstration was performed on the Na resonance line; high sensitivity (10−4 relative reflectivity change) and spectral resolution as good as 20 MHz were obtained. The main limitation to better resolution comes from the short atomic transit time in the evanescent wave (typical extension ~λ). Relevant applications of these techniques should also concern the diagnostics of optically thick media, as analysis of interaction between gas-phase atoms and the surface, notably atom–wall collisions, and modification of the spontaneous emission characteristics.