Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Conference on Precision Electromagnetic Measurements

Towards a quantum ampere with dual-Shapiro steps in ultrasmall Josephson junctions

Paolo Durandetto, Luca Fasolo, P. Panetta, M. Ortolano, Emanuele Enrico

Published Sep 1, 2026• 0 citations
Publisher

Abstract

Microwave-driven ultrasmall Josephson junctions integrated in high-impedance environments exhibit quantized current plateaus, dual of the Shapiro steps observed in conventional Josephson junctions. Dual Shapiro steps were found to agree with the theory in parts in 103, and research is now ongoing with the aim of increasing the plateau currents and robustness, favoring the adoption of dual Josephson devices as primary quantum current standards. This work presents the development of an experimental setup optimized to achieve accurate quantum current plateaus. The setup includes a dry dilution refrigerator equipped with properly filtered DC and microwave lines for the minimization of noise and interferences, targeting the traceable characterization of dual Shapiro steps with uncertainties down to the 10−6level.

DOI
10.1109/cpem68396.2026.11756932

Related papers

Quantized current steps due to the synchronization of microwaves with Bloch oscillations in small Josephson junctions

Rais S. Shaikhaidarov, Kyung Ho Kim, Jacob Dunstan +4 more

Abstract Synchronization of Bloch oscillations in small Josephson junctions (JJs) under microwave radiation, which leads to current quantization, has been proposed as an effect that is dual to the appearance of Shapiro steps. This current quantization was recently demonstrated in superconducting nanowires in a compact high-impedance environment. Direct observation of current quantization in JJs would confirm the synchronization of Bloch oscillations with microwaves and help with the realisation of the metrological current standard. Here, we place JJs in a high-impedance environment and demonstrate dual Shapiro steps for frequencies up to 24 GHz ( I = 7.7 nA). Current quantization exists, however, only in a narrow range of JJ parameters. We carry out a systematic study to explain this by invoking the model of a JJ in the presence of thermal noise. The findings are important for fundamental physics and application in quantum metrology.

arXiv:2409.05707•Nature Communications•Oct 29, 2024•10 citations

Quantized currents at 2ef - studying the potential of dual Shapiro steps for a quantum current standard

Lukas Grünhaupt, Fabian Kaap, S. V. Lotkhov

Electrical quantum metrology using superconducting circuits relies on phase synchronization effects of Josephson oscillations with ac signals, resulting in equidistant voltage steps and forming the basis of today’s voltage standards. Because charge and phase are conjugate variables, the dual effect of equidistant current steps should also exist and was indeed predicted theoretically. It relies on so-called Bloch oscillations, which are oscillations of voltage occurring when a current-biased Josephson junction is embedded in an environment with characteristic impedance larger than the superconducting resistance quantum h/4e^2. In addition, Josephson junctions of lateral size on the order of tens of nm are necessary, such that their Josephson and charging energy are approximately equal. Synchronizing such Bloch-oscillations with an ac signal completes the duality with Shapiro steps, and results in the occurrence of steps in IV-measurements at I=2ef with e being the elementary charge, and f the frequency of the external ac signal. To emphasize the duality with Shapiro (voltage) steps, such current steps are called dual-Shapiro steps. Together with the established standards for voltage and resistance, a new standard for current based on dual-Shapiro steps would relate the ampere, volt and ohm through fundamental constants and frequency. If successfully realized with metrological precision this would close the quantum metrological triangle and might even enable the combination of all three electric quantum relations in one single device. Here we show our efforts towards the realization of quantized currents with metrological applicability. Based on advances in fabrication technology and measurement capabilities, we demonstrate quantized current steps up to I≈2 nA by synchronizing Bloch oscillations with external ac signals up to 6 GHz [1,2]. In addition, we demonstrate a pulsed driving scheme resulting in an asymmetric pattern of dual-Shapiro steps featuring increased differential resistance [2]. Finally, we discuss the effects limiting the precision of our quantized current steps and present our efforts for tackling them. [1] F. Kaap et al., “Synchronization of Bloch Oscillations in a Strongly Coupled Pair of Small Josephson Junctions: Evidence for a Shapiro-like Current Step,“ Phys. Rev. Lett. 132, 027001, 2024. [2] F. Kaap et al., “Demonstration of dual Shapiro steps in small Josephson junctions,“ Nature Communications 15, 8726, 2024.

•Jan 1, 2025•0 citations

Quantum phase-slip junction under microwave irradiation

Angelo Di Marco, F. W. J. Hekking, Gianluca Rastelli

We consider the dynamics of a quantum phase-slip junction (QPSJ), a dual Josephson junction, connected to a microwave source with frequency ${\ensuremath{\omega}}_{\mathrm{mw}}$. With respect to an ordinary Josephson junction, a QPSJ can sustain dual Shapiro steps, consisting of well-defined current plateaus at multiple integers of $e{\ensuremath{\omega}}_{\mathrm{mw}}/\ensuremath{\pi}$ in the current-voltage $(I\text{\ensuremath{-}}V)$ characteristic. The experimental observation of these plateaus has been elusive up to now. We argue that thermal as well as quantum fluctuations can smear the $I\text{\ensuremath{-}}V$ characteristic considerably. In order to understand these effects, we study a current-biased QPSJ under microwave irradiation and connected to an inductive and resistive environment. We find that the effect of the fluctuations is governed by the resistance of the environment and by the ratio of the phase-slip energy and the inductive energy. Our results are of interest for experiments aiming at the observation of dual Shapiro steps in QPSJ devices for the definition of a new quantum current standard.

arXiv:1502.04878•Physical Review B•May 19, 2015•24 citations

Demonstration of dual Shapiro steps in small Josephson junctions

Fabian Kaap, Christoph Kissling, Victor Gaydamachenko +2 more

Abstract Bloch oscillations in small Josephson junctions were predicted theoretically as the quantum dual to Josephson oscillations. A significant consequence of this prediction is the emergence of quantized current steps, so-called dual Shapiro steps, when synchronizing Bloch oscillations to an external microwave signal. These steps potentially enable a fundamental standard of current I, defined via the frequency f of the external signal and the elementary charge e, I = ± n × 2ef, where n is a natural number. Here, we realize this fundamental relation by synchronizing the Bloch oscillations in small Al/AlOx/Al Josephson junctions to sinusoidal drives with frequencies from 1 to 6 GHz and observe dual Shapiro steps up to I ≈ 3 nA. Inspired by today’s voltage standards and to further confirm the duality relation, we investigate a pulsed drive regime and observe an asymmetric pattern of dual Shapiro steps. This work confirms quantum duality effects in Josephson junctions and paves the way towards a range of applications in quantum metrology based on well-established fabrication techniques and straightforward circuit design.

arXiv:2401.06599•Nature Communications•Oct 9, 2024•19 citations

Methods for electrical quantities metrology in cryogenic environments

Paolo Panetta

Quantum electrical metrology relies extensively on cryogenic phenomena, most notably the Josephson and quantum Hall effects, which provide the foundations of modern voltage and resistance standards. At the same time, the rapid development of superconducting electronics and cryogenic quantum technologies has increased the demand for accurate and traceable electrical measurements performed directly at cryogenic temperatures. Limited cooling power, self-heating, imperfect thermalization, parasitic impedances, and long measurement lines make the characterization and uncertainty assessment of such measurements particularly challenging. This thesis addresses two complementary aspects of electrical metrology in cryogenic environments: the traceable determination of microwave power at the device reference plane and the characterization of both a device exhibiting quantized current through dual Shapiro steps and its measurement setup.

•Oct 14, 2026•0 citations

Dual Shapiro steps and fundamental transconductance in the dc-driven Bloch transistor

A. B. Zorin

We propose a superconducting circuit based on the Bloch transistor, a quantum device consisting of two small-capacitance Josephson junctions, connected in series and having a small superconducting island in between. This device is driven by two dc electrical sources controlling Josephson oscillations of frequency $f_J = 2e\overline{V_J}/h$, related to the average transistor voltage $\overline{V_J}$, and Bloch oscillations of frequency $f_B = \overline{I_B}/2e$, related to the average current $\overline{I_B}$ injected into the transistor island. We show that due to the Bloch transistor properties, these two types of oscillations are coupled and can mutually phase-lock, i.e., $f_J = f_B$. This leads to the formation of a current step on the current-voltage curve at $\overline{I_B} = 2ef_J$, which is similar to the dual Shapiro step, appearing under microwave irradiation of frequency $f$ on the current-voltage curve of a small Josephson Junction at current $I=2ef$. Moreover, the Bloch transistor transconductance $\overline{I_B}/\overline{V_J}$ takes the fundamental value of $1/R_Q$, where $R_Q = h/4e^2$ is the resistance quantum. The obtained results pave the way to an alternative quantum standard of resistance, based on the superconducting circuit and operating without applying a strong magnetic field.

cond-mat.supr-conCross-listedarXiv:2605.14080•Physical review. B./Physical review. B•May 15, 2026•0 citations
Microwave-driven ultrasmall Josephson junctions integrated in high-impedance environments exhibit quantized current plateaus, dual of the Shapiro steps observed in conventional Josephson junctions. Dual Shapiro steps were found to agree with the theory in parts in 103, and research is now ongoing with the aim of increasing the plateau currents and robustness, favoring the adoption of dual Josephson devices as primary quantum current standards. This work presents the development of an experimental setup optimized to achieve accurate quantum current plateaus. The setup includes a dry dilution refrigerator equipped with properly filtered DC and microwave lines for the minimization of noise and interferences, targeting the traceable characterization of dual Shapiro steps with uncertainties down to the 10−6level.
Abstract Synchronization of Bloch oscillations in small Josephson junctions (JJs) under microwave radiation, which leads to current quantization, has been proposed as an effect that is dual to the appearance of Shapiro steps. This current quantization was recently demonstrated in superconducting nanowires in a compact high-impedance environment. Direct observation of current quantization in JJs would confirm the synchronization of Bloch oscillations with microwaves and help with the realisation of the metrological current standard. Here, we place JJs in a high-impedance environment and demonstrate dual Shapiro steps for frequencies up to 24 GHz ( I = 7.7 nA). Current quantization exists, however, only in a narrow range of JJ parameters. We carry out a systematic study to explain this by invoking the model of a JJ in the presence of thermal noise. The findings are important for fundamental physics and application in quantum metrology.
Electrical quantum metrology using superconducting circuits relies on phase synchronization effects of Josephson oscillations with ac signals, resulting in equidistant voltage steps and forming the basis of today’s voltage standards. Because charge and phase are conjugate variables, the dual effect of equidistant current steps should also exist and was indeed predicted theoretically. It relies on so-called Bloch oscillations, which are oscillations of voltage occurring when a current-biased Josephson junction is embedded in an environment with characteristic impedance larger than the superconducting resistance quantum h/4e^2. In addition, Josephson junctions of lateral size on the order of tens of nm are necessary, such that their Josephson and charging energy are approximately equal. Synchronizing such Bloch-oscillations with an ac signal completes the duality with Shapiro steps, and results in the occurrence of steps in IV-measurements at I=2ef with e being the elementary charge, and f the frequency of the external ac signal. To emphasize the duality with Shapiro (voltage) steps, such current steps are called dual-Shapiro steps. Together with the established standards for voltage and resistance, a new standard for current based on dual-Shapiro steps would relate the ampere, volt and ohm through fundamental constants and frequency. If successfully realized with metrological precision this would close the quantum metrological triangle and might even enable the combination of all three electric quantum relations in one single device. Here we show our efforts towards the realization of quantized currents with metrological applicability. Based on advances in fabrication technology and measurement capabilities, we demonstrate quantized current steps up to I≈2 nA by synchronizing Bloch oscillations with external ac signals up to 6 GHz [1,2]. In addition, we demonstrate a pulsed driving scheme resulting in an asymmetric pattern of dual-Shapiro steps featuring increased differential resistance [2]. Finally, we discuss the effects limiting the precision of our quantized current steps and present our efforts for tackling them. [1] F. Kaap et al., “Synchronization of Bloch Oscillations in a Strongly Coupled Pair of Small Josephson Junctions: Evidence for a Shapiro-like Current Step,“ Phys. Rev. Lett. 132, 027001, 2024. [2] F. Kaap et al., “Demonstration of dual Shapiro steps in small Josephson junctions,“ Nature Communications 15, 8726, 2024.
We consider the dynamics of a quantum phase-slip junction (QPSJ), a dual Josephson junction, connected to a microwave source with frequency ${\ensuremath{\omega}}_{\mathrm{mw}}$. With respect to an ordinary Josephson junction, a QPSJ can sustain dual Shapiro steps, consisting of well-defined current plateaus at multiple integers of $e{\ensuremath{\omega}}_{\mathrm{mw}}/\ensuremath{\pi}$ in the current-voltage $(I\text{\ensuremath{-}}V)$ characteristic. The experimental observation of these plateaus has been elusive up to now. We argue that thermal as well as quantum fluctuations can smear the $I\text{\ensuremath{-}}V$ characteristic considerably. In order to understand these effects, we study a current-biased QPSJ under microwave irradiation and connected to an inductive and resistive environment. We find that the effect of the fluctuations is governed by the resistance of the environment and by the ratio of the phase-slip energy and the inductive energy. Our results are of interest for experiments aiming at the observation of dual Shapiro steps in QPSJ devices for the definition of a new quantum current standard.
Abstract Bloch oscillations in small Josephson junctions were predicted theoretically as the quantum dual to Josephson oscillations. A significant consequence of this prediction is the emergence of quantized current steps, so-called dual Shapiro steps, when synchronizing Bloch oscillations to an external microwave signal. These steps potentially enable a fundamental standard of current I, defined via the frequency f of the external signal and the elementary charge e, I = ± n × 2ef, where n is a natural number. Here, we realize this fundamental relation by synchronizing the Bloch oscillations in small Al/AlOx/Al Josephson junctions to sinusoidal drives with frequencies from 1 to 6 GHz and observe dual Shapiro steps up to I ≈ 3 nA. Inspired by today’s voltage standards and to further confirm the duality relation, we investigate a pulsed drive regime and observe an asymmetric pattern of dual Shapiro steps. This work confirms quantum duality effects in Josephson junctions and paves the way towards a range of applications in quantum metrology based on well-established fabrication techniques and straightforward circuit design.
Quantum electrical metrology relies extensively on cryogenic phenomena, most notably the Josephson and quantum Hall effects, which provide the foundations of modern voltage and resistance standards. At the same time, the rapid development of superconducting electronics and cryogenic quantum technologies has increased the demand for accurate and traceable electrical measurements performed directly at cryogenic temperatures. Limited cooling power, self-heating, imperfect thermalization, parasitic impedances, and long measurement lines make the characterization and uncertainty assessment of such measurements particularly challenging. This thesis addresses two complementary aspects of electrical metrology in cryogenic environments: the traceable determination of microwave power at the device reference plane and the characterization of both a device exhibiting quantized current through dual Shapiro steps and its measurement setup.
We propose a superconducting circuit based on the Bloch transistor, a quantum device consisting of two small-capacitance Josephson junctions, connected in series and having a small superconducting island in between. This device is driven by two dc electrical sources controlling Josephson oscillations of frequency fJ=2eVJ‾/hf_J = 2e\overline{V_J}/hfJ​=2eVJ​​/h, related to the average transistor voltage VJ‾\overline{V_J}VJ​​, and Bloch oscillations of frequency fB=IB‾/2ef_B = \overline{I_B}/2efB​=IB​​/2e, related to the average current IB‾\overline{I_B}IB​​ injected into the transistor island. We show that due to the Bloch transistor properties, these two types of oscillations are coupled and can mutually phase-lock, i.e., fJ=fBf_J = f_BfJ​=fB​. This leads to the formation of a current step on the current-voltage curve at IB‾=2efJ\overline{I_B} = 2ef_JIB​​=2efJ​, which is similar to the dual Shapiro step, appearing under microwave irradiation of frequency fff on the current-voltage curve of a small Josephson Junction at current I=2efI=2efI=2ef. Moreover, the Bloch transistor transconductance IB‾/VJ‾\overline{I_B}/\overline{V_J}IB​​/VJ​​ takes the fundamental value of 1/RQ1/R_Q1/RQ​, where RQ=h/4e2R_Q = h/4e^2RQ​=h/4e2 is the resistance quantum. The obtained results pave the way to an alternative quantum standard of resistance, based on the superconducting circuit and operating without applying a strong magnetic field.