Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Conference on Precision Electromagnetic Measurements

Development of Current Measurement System with Programmable Josephson Voltage Standard and Quantum Hall Resistance Array in a Single Dilution Refrigerator

Daiki Matsumaru, Takehiko Oe, Shuji Nakamura, Hirotake Yamamori, Yuma Okazaki, Tomonori Arakawa, Shota Norimoto, Junta Igarashi, Takanari Kashiwagi, Michitaka Maruyama, Nobu‐Hisa Kaneko

Published Sep 1, 2026• 0 citations
Publisher

Abstract

We evaluated two types of quantum devices, namely, the programmable Josephson voltage standard and the quantum Hall resistance array, for use in a current measurement system within a single dilution refrigerator. The results showed stable operation for both devices under a magnetic field of 10.2 T, generated by a superconducting magnet. This stability was achieved using a magnetic shielding method with a superconducting magnetic shield structure that we developed. Herein, we describe the current measurement system that allows for flexible measurement configurations. This research not only focuses on current measurement but also lays the groundwork for future studies, including quantum current generation and experiments related to the quantum metrology triangle.

DOI
10.1109/cpem68396.2026.11756446

Related papers

Operation of Josephson Voltage Standard with Superconducting Shield in Magnetic-Field Environment

Daiki Matsumaru, Takehiko Oe, Shuji Nakamura +2 more

We have successfully operated a Josephson voltage standard (JVS) with a superconducting shield in a magnetic-field environment. This study involves mounting a NbN-based JVS chip on a custom-made 12 K stage adjacent to the 4 K stage within a dilution refrigerator. A magnetic field, reaching up to 10 T and generated by a superconducting magnet positioned 73 cm below the JVS chip, is initially reduced by a cancellation coil and further minimized by a superconducting shield comprising Nb, Pb, and permalloy. Consequently, clear Shapiro steps were observed under a magnetic field of approximately 10 T. This achievement marks a significant milestone toward facilitating quantum metrology triangle experiments within a single dilution refrigerator and conducting precise voltage measurements under extreme conditions.

Conference on Precision Electromagnetic Measurements•Jul 8, 2024•1 citation

Applications: Metrology

John C. Gallop, Ling Hao, Alain Rüfenacht

Metrology is the science of precision measurement of physical quantities and has developed a close relationship with superconductivity and superconducting materials, beginning with the discoveries of magnetic flux quantization and the Josephson effects in 1961 and 1962. Programmable Josephson voltage standard systems were first proposed and developed at NIST and are nowadays fully demonstrated in numerous metrology measurements and operated in liquid-cryogen-free refrigerators. A Josephson array device with growing applications to ac voltage metrology has emerged in recent years: the pulse-driven Josephson arbitrary waveform synthesizer. The use of superconductors in solenoids allows current densities to be much higher than for conventional conductors due to zero Joule heating. The Josephson effect has been applied to temperature measurement through the detection of Johnson noise using various superconducting junction-based technologies. The most recent application of Josephson technologies to temperature metrology involves the use of quantum-based reference noise-voltage waveforms synthesized by arrays of Josephson junctions.

CRC Press eBooks•May 17, 2022•0 citations

A New Era for the Ampere

Mark W. Keller, José Aumentado

One major change of the future revision of the International System of Units is a new definition of the ampere based on the elementary charge e. Replacing the former definition based on Ampère's force law will allow one to fully benefit from quantum physics to realize the ampere.However, a quantum realization of the ampere from e, accurate to within 10 -8 in relative value and fulfilling traceability needs, is still missing despite the many efforts made for the development of single-electron tunneling devices.Starting again with Ohm's law, applied here in a quantum circuit combining the quantum Hall resistance and Josephson voltage standards with a superconducting cryogenic amplifier, we report on a practical and universal programmable quantum current generator.We demonstrate that currents generated in the milliampere range are accurately quantized in terms of ef J (f J is the Josephson frequency) with measurement uncertainty of 10 -8 .This new quantum current source, which is able to deliver such accurate currents down to the microampere range, can greatly improve the current measurement traceability, as demonstrated with the calibrations of digital ammeters.In addition, it opens the way to further developments in metrology and in fundamental physics, such as a quantum multimeter or new accurate comparisons to single-electron pumps.

Physics•Dec 12, 2016•4 citations

Practical Quantum Realization of the Ampere from the Elementary Charge

J. Brun-Picard, S. Djordjevic, D. Leprat +2 more

One major change of the future revision of the International System of Units is a new definition of the ampere based on the elementary charge e. Replacing the former definition based on Ampère's force law will allow one to fully benefit from quantum physics to realize the ampere.However, a quantum realization of the ampere from e, accurate to within 10 -8 in relative value and fulfilling traceability needs, is still missing despite the many efforts made for the development of single-electron tunneling devices.Starting again with Ohm's law, applied here in a quantum circuit combining the quantum Hall resistance and Josephson voltage standards with a superconducting cryogenic amplifier, we report on a practical and universal programmable quantum current generator.We demonstrate that currents generated in the milliampere range are accurately quantized in terms of ef J (f J is the Josephson frequency) with measurement uncertainty of 10 -8 .This new quantum current source, which is able to deliver such accurate currents down to the microampere range, can greatly improve the current measurement traceability, as demonstrated with the calibrations of digital ammeters.In addition, it opens the way to further developments in metrology and in fundamental physics, such as a quantum multimeter or new accurate comparisons to single-electron pumps.

arXiv:1606.03964•Physical Review X•Dec 12, 2016•52 citations

Feasibility of the Josephson voltage and current standards on a single chip

Rais S. Shaikhaidarov, Ilya Antonov, Kyung Ho Kim +5 more

The quantum Josephson voltage standard is well established across the metrology community for many years. It relies on the synchronization of the flux tunneling in the S/I/S Josephson junctions (JJ) with the microwave radiation (MW) of frequency f such that V=Φ0fm, where m = 0, 1, 2, …. The phenomenon is called the Shapiro steps. Together with the quantum Hall resistance standard, the voltage standard forms the foundation of electrostatic metrology. The current is then defined as the ratio of the voltage and resistance. Realization of the quantum current standard would close the electrostatic metrological triangle of voltage–resistance–current. The current quantization I=2efm, the inverse Shapiro steps, was recently shown using the superconducting nanowires and small JJ. The effect is a synchronization of the MW with the Cooper pair tunneling. This paves the way to combine the JJ voltage and current standards on the same chip and demonstrate feasibility of the multi-standard operation. We show the voltage and current quantization on the same chip up to frequency of 10 GHz, corresponding to the amplitudes ∼ 20.67 μV and ∼ 3.2 nA, respectively. The accuracy of the voltage and current quantization, however, is relatively low, 35 and 100 ppk, respectively. We discuss measures to optimize the JJs, circuit, and environment to boost the amplitude and accuracy of the standards.

arXiv:2410.11018•Applied Physics Letters•Sep 16, 2024•7 citations

A cryogen-free dilution refrigerator based Josephson qubit measurement system

Ye F. Tian, Hui Yu, Hui Deng +9 more

We develop a small-signal measurement system on cryogen-free dilution refrigerator which is suitable for superconducting qubit studies. Cryogen-free refrigerators have several advantages such as less manpower for system operation and large sample space for experiment, but concern remains about whether the noise introduced by the coldhead can be made sufficiently low. In this work, we demonstrate some effective approaches of acoustic isolation to reduce the noise impact. The electronic circuit that includes the current, voltage, and microwave lines for qubit coherent state measurement is described. For the current and voltage lines designed to have a low pass of dc-100 kHz, we show that the measurements of Josephson junction's switching current distribution with a width down to 1 nA, and quantum coherent Rabi oscillation and Ramsey interference of the superconducting qubit can be successfully performed.

Review of Scientific Instruments•Mar 1, 2012•18 citations
We evaluated two types of quantum devices, namely, the programmable Josephson voltage standard and the quantum Hall resistance array, for use in a current measurement system within a single dilution refrigerator. The results showed stable operation for both devices under a magnetic field of 10.2 T, generated by a superconducting magnet. This stability was achieved using a magnetic shielding method with a superconducting magnetic shield structure that we developed. Herein, we describe the current measurement system that allows for flexible measurement configurations. This research not only focuses on current measurement but also lays the groundwork for future studies, including quantum current generation and experiments related to the quantum metrology triangle.
We have successfully operated a Josephson voltage standard (JVS) with a superconducting shield in a magnetic-field environment. This study involves mounting a NbN-based JVS chip on a custom-made 12 K stage adjacent to the 4 K stage within a dilution refrigerator. A magnetic field, reaching up to 10 T and generated by a superconducting magnet positioned 73 cm below the JVS chip, is initially reduced by a cancellation coil and further minimized by a superconducting shield comprising Nb, Pb, and permalloy. Consequently, clear Shapiro steps were observed under a magnetic field of approximately 10 T. This achievement marks a significant milestone toward facilitating quantum metrology triangle experiments within a single dilution refrigerator and conducting precise voltage measurements under extreme conditions.
Metrology is the science of precision measurement of physical quantities and has developed a close relationship with superconductivity and superconducting materials, beginning with the discoveries of magnetic flux quantization and the Josephson effects in 1961 and 1962. Programmable Josephson voltage standard systems were first proposed and developed at NIST and are nowadays fully demonstrated in numerous metrology measurements and operated in liquid-cryogen-free refrigerators. A Josephson array device with growing applications to ac voltage metrology has emerged in recent years: the pulse-driven Josephson arbitrary waveform synthesizer. The use of superconductors in solenoids allows current densities to be much higher than for conventional conductors due to zero Joule heating. The Josephson effect has been applied to temperature measurement through the detection of Johnson noise using various superconducting junction-based technologies. The most recent application of Josephson technologies to temperature metrology involves the use of quantum-based reference noise-voltage waveforms synthesized by arrays of Josephson junctions.
One major change of the future revision of the International System of Units is a new definition of the ampere based on the elementary charge e. Replacing the former definition based on Ampère's force law will allow one to fully benefit from quantum physics to realize the ampere.However, a quantum realization of the ampere from e, accurate to within 10 -8 in relative value and fulfilling traceability needs, is still missing despite the many efforts made for the development of single-electron tunneling devices.Starting again with Ohm's law, applied here in a quantum circuit combining the quantum Hall resistance and Josephson voltage standards with a superconducting cryogenic amplifier, we report on a practical and universal programmable quantum current generator.We demonstrate that currents generated in the milliampere range are accurately quantized in terms of ef J (f J is the Josephson frequency) with measurement uncertainty of 10 -8 .This new quantum current source, which is able to deliver such accurate currents down to the microampere range, can greatly improve the current measurement traceability, as demonstrated with the calibrations of digital ammeters.In addition, it opens the way to further developments in metrology and in fundamental physics, such as a quantum multimeter or new accurate comparisons to single-electron pumps.
One major change of the future revision of the International System of Units is a new definition of the ampere based on the elementary charge e. Replacing the former definition based on Ampère's force law will allow one to fully benefit from quantum physics to realize the ampere.However, a quantum realization of the ampere from e, accurate to within 10 -8 in relative value and fulfilling traceability needs, is still missing despite the many efforts made for the development of single-electron tunneling devices.Starting again with Ohm's law, applied here in a quantum circuit combining the quantum Hall resistance and Josephson voltage standards with a superconducting cryogenic amplifier, we report on a practical and universal programmable quantum current generator.We demonstrate that currents generated in the milliampere range are accurately quantized in terms of ef J (f J is the Josephson frequency) with measurement uncertainty of 10 -8 .This new quantum current source, which is able to deliver such accurate currents down to the microampere range, can greatly improve the current measurement traceability, as demonstrated with the calibrations of digital ammeters.In addition, it opens the way to further developments in metrology and in fundamental physics, such as a quantum multimeter or new accurate comparisons to single-electron pumps.
The quantum Josephson voltage standard is well established across the metrology community for many years. It relies on the synchronization of the flux tunneling in the S/I/S Josephson junctions (JJ) with the microwave radiation (MW) of frequency f such that V=Φ0fm, where m = 0, 1, 2, …. The phenomenon is called the Shapiro steps. Together with the quantum Hall resistance standard, the voltage standard forms the foundation of electrostatic metrology. The current is then defined as the ratio of the voltage and resistance. Realization of the quantum current standard would close the electrostatic metrological triangle of voltage–resistance–current. The current quantization I=2efm, the inverse Shapiro steps, was recently shown using the superconducting nanowires and small JJ. The effect is a synchronization of the MW with the Cooper pair tunneling. This paves the way to combine the JJ voltage and current standards on the same chip and demonstrate feasibility of the multi-standard operation. We show the voltage and current quantization on the same chip up to frequency of 10 GHz, corresponding to the amplitudes ∼ 20.67 μV and ∼ 3.2 nA, respectively. The accuracy of the voltage and current quantization, however, is relatively low, 35 and 100 ppk, respectively. We discuss measures to optimize the JJs, circuit, and environment to boost the amplitude and accuracy of the standards.
We develop a small-signal measurement system on cryogen-free dilution refrigerator which is suitable for superconducting qubit studies. Cryogen-free refrigerators have several advantages such as less manpower for system operation and large sample space for experiment, but concern remains about whether the noise introduced by the coldhead can be made sufficiently low. In this work, we demonstrate some effective approaches of acoustic isolation to reduce the noise impact. The electronic circuit that includes the current, voltage, and microwave lines for qubit coherent state measurement is described. For the current and voltage lines designed to have a low pass of dc-100 kHz, we show that the measurements of Josephson junction's switching current distribution with a width down to 1 nA, and quantum coherent Rabi oscillation and Ramsey interference of the superconducting qubit can be successfully performed.