Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Conference on Precision Electromagnetic Measurements

Progress on PTB’s Parallel Optical Pulse-Drive for AC Josephson Voltage Standards

Timo Glebe-Märklin, Marco Kraus, Oliver Kieler, L. Palafox, Ralf Behr

Published Sep 1, 2026• 0 citations
Publisher

Abstract

This paper presents the latest progress on PTB’s parallel optical pulse-drive for AC Josephson voltage standards. Joint operation of multiple Josephson junction arrays with pulses transmitted via parallel optical channels is demonstrated using two series-connected arrays driven by a four-channel parallel optical pulse-drive. A 1 kHz bipolar sine wave with an 85 mV root mean square amplitude is synthesized, with harmonics suppressed by more than 110 dBc and a quantum locking range of 0.4 mA. Further, an expanded setup is introduced in which eight series-connected Josephson junction arrays are driven by a 16-channel parallel optical pulse-drive to synthesize bipolar signals with root mean square amplitudes of 1 V.

DOI
10.1109/cpem68396.2026.11756244

Related papers

Parallelization of the optical pulse-drive for AC Josephson voltage standards

Marco Kraus, Oliver Kieler, Ralf Behr +1 more

Abstract We have successfully operated two Josephson junction arrays in parallel with photonically generated current pulses to achieve higher output voltages with our optical pulse drive setup. Passive optical power splitters divide each optical channel at room temperature in order to illuminate multiple cryogenic photodiodes at 4 K , located near the arrays. The balanced photodiode configurations bias the Josephson junctions with ternary current pulses to generate a 1 kHz bipolar sinusoidal voltage with a nominal root mean square amplitude of 85 mV . We determined a spurious free dynamic range and total harmonic distortion of 110.6 dBc and − 105.0 dB from the spectrum of the synthesized signal. Applying an additional dither current to each array individually yielded a quantum locking range of 0.4 mA and 0.6 mA . Furthermore, the quantum locked operation was confirmed to remain stable when the optical output power of the laser diodes and the DC bias of the Mach–Zehnder modulators were varied. A stability measurement of the output amplitude over more than half an hour confirmed sufficiently wide operating margins, further demonstrating a reliable optical Josephson arbitrary waveform synthesizer setup suitable for generating quantum-based waveform with high spectral purity traceable to fundamental constants. To our knowledge, this is the highest amplitude generated with optically driven Josephson junctions so far and the first successful proof of principle for parallelizing the optical pulse drive to achieve higher output voltages in the future.

Measurement Science and Technology•Aug 18, 2025•3 citations

Progress on the Opto-Electronic Bias for Pulse-Driven Josephson Voltage Standards at PTB

Marco Kraus, Oliver Kieler, Ralf Behr +1 more

After demonstrating bipolar waveforms in 2020, PTB’s optical pulse transmission drive has been expanded for two independent Josephson junction arrays. Passive optical power splitters divide the two independent optical channels at room temperature. Balanced photodiodes modules in liquid helium then generate ternary electrical pulses to drive the nearby Josephson junction arrays via coplanar waveguides less than 10 mm long. The outputs of the Josephson junction arrays are connected in series and we successfully synthesized bipolar sinewaves at 1 kHz and 35 mV rms amplitude with higher harmonics suppressed by more than 96 dBc.

Conference on Precision Electromagnetic Measurements•Jul 8, 2024•1 citation

PTB's status of AC voltage metrolgy by microwave- and pulsetrain-driven josephson junction arrays

J. Niemeyer, Oliver Kieler, F. Muller +6 more

The report describes the most recent PTB developments and applications of large Josephson arrays for the generation of very precise sine waves and arbitrary waveforms. By means of large70 GHz sine-wave-driven binary arrays, AC voltages with frequencies up to 1 kHz and amplitudes of more than 10 V were generated with an uncertainty of better than 1μV/V. For the fabrication of this array type with up to 70000 junctions in series connection, an SNS junction technology with NbxSix-1barriers is now completely installed and permanently in use. With pulse-driven arrays of Josephson junctions, arbitrary waveforms were generated with a level of higher harmonics smaller than -120 dBc for frequencies from 150 Hz to 100 kHz at rms voltages less than 100 mV. These results were achieved with extended arrays of up to 4795 very small SNS junctions with Hf0.5Ti0.5barriers. Also the NbSi-technology technology has successfully been applied for the fabrication of pulse-driven Josephson arrays. As it seems to be difficult to considerably increase the wave amplitude by enhancing the junction number of the arrays, experiments were performed to combine a binary array system with a pulse-driven system with the goal to make use of the high amplitude of stepwise generated waves without losing the low noise and precision of quantum based rf waveforms generated by pulse trains at a clock frequency of 15 GHz.

International Kharkiv Symposium on Physics and Engineering of Microwaves, Millimeter and Submillimeter Waves•Jun 1, 2013•0 citations

Bipolar Waveform Synthesis With an Optically Driven Josephson Arbitrary Waveform Synthesizer

Justus A. Brevik, Dahyeon Lee, Anna E. Fox +6 more

An array of Josephson junctions (JJs) was driven with photonically generated current pulses to synthesize a high-fidelity 1 kHz bipolar voltage waveform with a quantum-based amplitude that can be directly related to fundamental constants. A photodiode capable of producing high average photocurrent was used to generate large-amplitude current pulses that were ac-coupled to a JJ array. The resulting bipolar current pulses have enabled the first demonstration of quantum-based bipolar waveform synthesis with an optical drive. We measured the quantum locking range with respect to several operating parameters, including 1.2 mA with respect to a dc bias current applied to the array, confirming the robust synthesis of bipolar waveforms.

IEEE Transactions on Applied Superconductivity•Apr 19, 2022•14 citations

Optical Pulse-Drive for the Pulse-Driven AC Josephson Voltage Standard

Oliver Kieler, Bjørnar Karlsen, Per Alfred Øhlckers +8 more

We developed an optical pulse-drive for the operation of the Josephson Arbitrary Waveform Synthesizer (JAWS) using a fast photodiode (PD) operated at 4 K, close to the JAWS chip. The optical pulses are transmitted to the PD by an easily removable optical fiber attached to it. A bare-lensed PD is mounted by flip-chip technique to a custom-made silicon-carrier chip. This carrier chip is equipped with coplanar waveguides to transmit the electrical pulses from the PD to the JAWS chip mounted on a separate printed circtuit board (PCB). The main components of this optical setup are a laser source, a high-speed Mach-Zehnder modulator, and the modulator driver. The waveform pattern is supplied by a commercial pulse pattern generator providing up to 15 GHz electrical return-to-zero (RTZ)-pulses. Unipolar sinusoidal waveforms were synthesized. Using a JAWS array with 3000 junctions, an effective output voltage of 6.6 mV root mean square (RMS) at the maximum available clock-frequency of 15 GHz was achieved. Higher harmonics were suppressed by more than 90 dBc at laser-bias operation margins of more than 1 mA.

IEEE Transactions on Applied Superconductivity•Mar 16, 2019•31 citations

Realization of an Opto-Electronic Bias for Pulse-Driven Josephson Voltage Standards at PTB

Jonas Herick, L. Palafox, Eivind Bardalen +5 more

Pulse-driven Josephson voltage standards are used to generate quantum-based, spectrally pure AC voltage signals. The current pulses that drive the Josephson arrays can be transmitted optically and recent progress has demonstrated the operation of fast photodiodes at 4 K. In order to generate bipolar waveforms, two photodiodes are required to generate positive and negative pulses close to the Josephson array. We describe our optoelectronic setup and will present first results on a ternary pulse drive at the conference.

Conference on Precision Electromagnetic Measurements•Aug 1, 2020•7 citations
This paper presents the latest progress on PTB’s parallel optical pulse-drive for AC Josephson voltage standards. Joint operation of multiple Josephson junction arrays with pulses transmitted via parallel optical channels is demonstrated using two series-connected arrays driven by a four-channel parallel optical pulse-drive. A 1 kHz bipolar sine wave with an 85 mV root mean square amplitude is synthesized, with harmonics suppressed by more than 110 dBc and a quantum locking range of 0.4 mA. Further, an expanded setup is introduced in which eight series-connected Josephson junction arrays are driven by a 16-channel parallel optical pulse-drive to synthesize bipolar signals with root mean square amplitudes of 1 V.
Abstract We have successfully operated two Josephson junction arrays in parallel with photonically generated current pulses to achieve higher output voltages with our optical pulse drive setup. Passive optical power splitters divide each optical channel at room temperature in order to illuminate multiple cryogenic photodiodes at 4 K , located near the arrays. The balanced photodiode configurations bias the Josephson junctions with ternary current pulses to generate a 1 kHz bipolar sinusoidal voltage with a nominal root mean square amplitude of 85 mV . We determined a spurious free dynamic range and total harmonic distortion of 110.6 dBc and − 105.0 dB from the spectrum of the synthesized signal. Applying an additional dither current to each array individually yielded a quantum locking range of 0.4 mA and 0.6 mA . Furthermore, the quantum locked operation was confirmed to remain stable when the optical output power of the laser diodes and the DC bias of the Mach–Zehnder modulators were varied. A stability measurement of the output amplitude over more than half an hour confirmed sufficiently wide operating margins, further demonstrating a reliable optical Josephson arbitrary waveform synthesizer setup suitable for generating quantum-based waveform with high spectral purity traceable to fundamental constants. To our knowledge, this is the highest amplitude generated with optically driven Josephson junctions so far and the first successful proof of principle for parallelizing the optical pulse drive to achieve higher output voltages in the future.
After demonstrating bipolar waveforms in 2020, PTB’s optical pulse transmission drive has been expanded for two independent Josephson junction arrays. Passive optical power splitters divide the two independent optical channels at room temperature. Balanced photodiodes modules in liquid helium then generate ternary electrical pulses to drive the nearby Josephson junction arrays via coplanar waveguides less than 10 mm long. The outputs of the Josephson junction arrays are connected in series and we successfully synthesized bipolar sinewaves at 1 kHz and 35 mV rms amplitude with higher harmonics suppressed by more than 96 dBc.
The report describes the most recent PTB developments and applications of large Josephson arrays for the generation of very precise sine waves and arbitrary waveforms. By means of large70 GHz sine-wave-driven binary arrays, AC voltages with frequencies up to 1 kHz and amplitudes of more than 10 V were generated with an uncertainty of better than 1μV/V. For the fabrication of this array type with up to 70000 junctions in series connection, an SNS junction technology with NbxSix-1barriers is now completely installed and permanently in use. With pulse-driven arrays of Josephson junctions, arbitrary waveforms were generated with a level of higher harmonics smaller than -120 dBc for frequencies from 150 Hz to 100 kHz at rms voltages less than 100 mV. These results were achieved with extended arrays of up to 4795 very small SNS junctions with Hf0.5Ti0.5barriers. Also the NbSi-technology technology has successfully been applied for the fabrication of pulse-driven Josephson arrays. As it seems to be difficult to considerably increase the wave amplitude by enhancing the junction number of the arrays, experiments were performed to combine a binary array system with a pulse-driven system with the goal to make use of the high amplitude of stepwise generated waves without losing the low noise and precision of quantum based rf waveforms generated by pulse trains at a clock frequency of 15 GHz.
An array of Josephson junctions (JJs) was driven with photonically generated current pulses to synthesize a high-fidelity 1 kHz bipolar voltage waveform with a quantum-based amplitude that can be directly related to fundamental constants. A photodiode capable of producing high average photocurrent was used to generate large-amplitude current pulses that were ac-coupled to a JJ array. The resulting bipolar current pulses have enabled the first demonstration of quantum-based bipolar waveform synthesis with an optical drive. We measured the quantum locking range with respect to several operating parameters, including 1.2 mA with respect to a dc bias current applied to the array, confirming the robust synthesis of bipolar waveforms.
We developed an optical pulse-drive for the operation of the Josephson Arbitrary Waveform Synthesizer (JAWS) using a fast photodiode (PD) operated at 4 K, close to the JAWS chip. The optical pulses are transmitted to the PD by an easily removable optical fiber attached to it. A bare-lensed PD is mounted by flip-chip technique to a custom-made silicon-carrier chip. This carrier chip is equipped with coplanar waveguides to transmit the electrical pulses from the PD to the JAWS chip mounted on a separate printed circtuit board (PCB). The main components of this optical setup are a laser source, a high-speed Mach-Zehnder modulator, and the modulator driver. The waveform pattern is supplied by a commercial pulse pattern generator providing up to 15 GHz electrical return-to-zero (RTZ)-pulses. Unipolar sinusoidal waveforms were synthesized. Using a JAWS array with 3000 junctions, an effective output voltage of 6.6 mV root mean square (RMS) at the maximum available clock-frequency of 15 GHz was achieved. Higher harmonics were suppressed by more than 90 dBc at laser-bias operation margins of more than 1 mA.
Pulse-driven Josephson voltage standards are used to generate quantum-based, spectrally pure AC voltage signals. The current pulses that drive the Josephson arrays can be transmitted optically and recent progress has demonstrated the operation of fast photodiodes at 4 K. In order to generate bipolar waveforms, two photodiodes are required to generate positive and negative pulses close to the Josephson array. We describe our optoelectronic setup and will present first results on a ternary pulse drive at the conference.