Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Conference on Precision Electromagnetic Measurements

Quasi-Continuous AC Voltage Generation Using Two Pulse-Driven Josephson Arrays

D. Georgakopoulos

Published Sep 1, 2026• 0 citations
Publisher

Abstract

Pulse-driven Josephson junction arrays (PD JJAs) enable quantum-accurate arbitrary waveform generation. Operating at a given voltage and frequency requires optimizing several bias parameters (including the RF bias, magnitude and phase of the compensation current and the finite impulse response filter coefficients) to ensure that the array operates within the quantum locking range. This process is time consuming and necessitates the maintenance of a large database of bias settings. We present a practical approach that uses two PD JJAs at the same frequency with a controllable phase offset to generate an almost continuous voltage range (0 V to twice a single array) while reducing the required bias-adjustment effort.

DOI
10.1109/cpem68396.2026.11756934

Related papers

Quantum Locking Range in Pulse-Driven Josephson Junction Arrays for Alternating Voltage

D. Georgakopoulos

Pulse-driven Josephson junction arrays (PD JJAs) enable "intrinsically-accurate" generation of alternating (ac) voltage waveforms. For quantized operation, all junctions must maintain a quantum locking range (QLR) with respect to radio frequency (RF) bias. In this paper we investigate the QLR of PD JJAs for the generation of ac voltage. For this purpose, we use a lock-in amplifier-based technique that can resolve voltage changes of a few nanovolts caused by the change in RF bias. Our results show that near the QLR, the current-voltage characteristics can show apparent voltage quantization with statistical behavior nearly indistinguishable from that observed within the QLR.

Conference on Precision Electromagnetic Measurements•Sep 1, 2026•0 citations

Quantum Locking Range Effects in Pulse-Driven Josephson Junction Arrays for DC Voltage Generation

D. Georgakopoulos

Pulse-driven Josephson junction arrays (PD JJAs) are used for the generation of arbitrary waveforms with quantum accuracy. The main requirement for quantum operation is that all the Josephson junctions have quantum locking ranges (QLRs) with respect to the power and frequency of the radio frequency (RF) bias and constant voltage over a range of dc bias currents. In this paper we investigate the QLR of PD JJAs for the generation of dc voltage. Our results demonstrate that in proximity to the QLR for RF power, the dc current-voltage characteristics can show apparent quantization of the voltage with statistical properties almost indistinguishable from those in the QLR.

Conference on Precision Electromagnetic Measurements•Jul 8, 2024•1 citation

Quasi-continuous dc voltage standard using sinusoidal and pulse-driven Josephson junction arrays

D. Georgakopoulos, Ilya F. Budovsky, Samuel P. Benz

Abstract Josephson voltage standards (JVSs) provide a primary realization of the volt, the unit of electromotive force. They generate direct current (dc) voltages up to 10 V and show agreement better than 1 nV V−1 at 10 V. For JVSs based on Josephson junction arrays (JJAs) that are driven by sinusoidal radiofrequency (RF) power, commonly referred to as continuous wave-driven JJAs (CWD JJAs), the minimum voltage that can be generated is limited to the voltage across one Josephson junction (JJ) for practical devices. To achieve this resolution, they may require a perfect JJA chip. JVSs based on a pulse-driven (PD) JJA require high performance electronics (i.e. high bandwidth, low distortion and jitter, pulse shaping filters and large memory) to achieve their minimum and maximum voltage. We have combined two CWD JJAs and two PD JJAs driven by two microwave inputs to one chip to generate quasi-continuous dc voltages up to the sum of the full-scale voltages of both JJAs that are robust to the imperfections of the JJs and have relaxed requirements on the RF electronics driving the JJA, compared to the existing CWD JVSs and PD JVSs, respectively. By use of the JJA chip at the National Measurement Institute Australia, we demonstrate its feasibility to generate voltages up to 1 V. Preliminary evaluation of the system shows that the voltage uncertainty can be 11 nV (k = 2) or better and the theoretical resolution is better than 1 nV from 0 V to 1 V. The main requirement is that all the JJs must have quantum locking ranges with respect to the power and frequency of the RF bias and for the PD JJAs to have a constant voltage over a range of dc bias current. Although this development is not a replacement for existing state-of-the-art JVSs, we anticipate that it will be an alternative fit-for-purpose solution for metrological applications under non-ideal operating conditions or when the components of the state-of-the-art solutions are not available.

Measurement Science and Technology•Nov 9, 2022•1 citation

Pulse-Driven Josephson Junction Arrays for High-Precision AC-Voltage Synthesis of Unipolar and Bipolar Waveforms

M. Schubert, G. Wende, T. May +5 more

The paper is about development of the lumped Josephson junction arrays (JJAs) for the generation of accurate quantum-based ac voltages. By using semiconductor pattern generators, it was possible to synthesize unipolar and bipolar waveforms with amplitudes of almost 10 mV and frequencies of up to 122 kHz. Higher harmonics and other unwanted noise signals were suppressed by -90 dBc. Because of the unique layout of our JJA, it was possible to connect the circuit directly to the ground, thereby eliminating common-mode signals

IEEE Transactions on Instrumentation and Measurement•Mar 16, 2007•3 citations

Josephson Arbitrary Waveform Synthesizer With Two Layers of Wilkinson Dividers and an FIR Filter

Nathan E. Flowers-Jacobs, Steven B. Waltman, Anna E. Fox +2 more

The output voltage of Josephson arbitrary waveform synthesizers (JAWS) is limited by the number of Josephson junctions (JJs) that can be driven by a single pulse-generator channel. Here, we double the number of JJs driven by one generator channel to 51 200 JJs by distributing the pulse bias between four JJ arrays by use of two layers of Wilkinson dividers. We use this single bias to generate a voltage at 1 kHz with an rms magnitude of 1 V. This voltage is quantum-accurate over an operating current range of 1.4 mA. For comparison, the operating current range of a recent design that uses a single layer of Wilkinson dividers is twice as large, but requires two pulse-bias channels to generate 1 V. We also show that we can recover this performance by incorporating in the pulse generator a finite-impulse response (FIR) filter that acts as an equalizer. The FIR filter creates a custom transfer function that compensates for the bandwidth-limited transfer function of the Wilkinson dividers. Optimizing the FIR filter parameters increases the operating current range from 1.4 to 2.7 mA. This ability to drive additional JJ arrays with a single pulse-generator channel will enable future JAWS chips and systems to achieve significantly larger output voltages. This will increase the voltage range for JAWS calibrations of ac thermal converters and improve precision voltage measurements that require quantum-accurate, stable, and distortion-free waveforms with a large signal-to-noise ratio.

IEEE Transactions on Applied Superconductivity•Jun 23, 2016•34 citations

Josephson Arbitrary Waveform System with Optoelectronic Drive

Jane Ireland, Oliver Kieler, J. Kohlmann +10 more

Quantum-accurate arbitrary voltage waveforms have been generated using electrical pulse driven Josephson junction arrays (JJAs) by several groups [1, 2]. An alternative method is to use optoelectronic components to convert the electrical pulse drive into an optical signal which is subsequently converted by a photodiode into an electrical drive signal connected directly to the JJA. This optoelectronic pulse drive system has several advantages. Due to the electrical isolation between electrical pulse drive and JJA, it is possible to connect several arrays in series without the requirement for complex electrical compensation circuits. This allows larger output voltages to be realized. An optoelectronic drive also offers the ability to easily tune pulse height, via continuous optical attenuation, allowing the drive signal to be tuned to the middle of the JJA constant voltage step giving optimum operation margins. We here present an optoelectronic pulse drive which forms part of a system incorporating a JJA and delta sigma feedback loop [3] for quantum-accurate digitization of arbitrary voltage waveforms. Results showing the generation of quantum-accurate voltages synchronized to the feedback loop master clock are presented.

IEEE International Superconductive Electronics Conference (ISEC)•Jun 1, 2017•3 citations
Pulse-driven Josephson junction arrays (PD JJAs) enable quantum-accurate arbitrary waveform generation. Operating at a given voltage and frequency requires optimizing several bias parameters (including the RF bias, magnitude and phase of the compensation current and the finite impulse response filter coefficients) to ensure that the array operates within the quantum locking range. This process is time consuming and necessitates the maintenance of a large database of bias settings. We present a practical approach that uses two PD JJAs at the same frequency with a controllable phase offset to generate an almost continuous voltage range (0 V to twice a single array) while reducing the required bias-adjustment effort.
Pulse-driven Josephson junction arrays (PD JJAs) enable "intrinsically-accurate" generation of alternating (ac) voltage waveforms. For quantized operation, all junctions must maintain a quantum locking range (QLR) with respect to radio frequency (RF) bias. In this paper we investigate the QLR of PD JJAs for the generation of ac voltage. For this purpose, we use a lock-in amplifier-based technique that can resolve voltage changes of a few nanovolts caused by the change in RF bias. Our results show that near the QLR, the current-voltage characteristics can show apparent voltage quantization with statistical behavior nearly indistinguishable from that observed within the QLR.
Pulse-driven Josephson junction arrays (PD JJAs) are used for the generation of arbitrary waveforms with quantum accuracy. The main requirement for quantum operation is that all the Josephson junctions have quantum locking ranges (QLRs) with respect to the power and frequency of the radio frequency (RF) bias and constant voltage over a range of dc bias currents. In this paper we investigate the QLR of PD JJAs for the generation of dc voltage. Our results demonstrate that in proximity to the QLR for RF power, the dc current-voltage characteristics can show apparent quantization of the voltage with statistical properties almost indistinguishable from those in the QLR.
Abstract Josephson voltage standards (JVSs) provide a primary realization of the volt, the unit of electromotive force. They generate direct current (dc) voltages up to 10 V and show agreement better than 1 nV V−1 at 10 V. For JVSs based on Josephson junction arrays (JJAs) that are driven by sinusoidal radiofrequency (RF) power, commonly referred to as continuous wave-driven JJAs (CWD JJAs), the minimum voltage that can be generated is limited to the voltage across one Josephson junction (JJ) for practical devices. To achieve this resolution, they may require a perfect JJA chip. JVSs based on a pulse-driven (PD) JJA require high performance electronics (i.e. high bandwidth, low distortion and jitter, pulse shaping filters and large memory) to achieve their minimum and maximum voltage. We have combined two CWD JJAs and two PD JJAs driven by two microwave inputs to one chip to generate quasi-continuous dc voltages up to the sum of the full-scale voltages of both JJAs that are robust to the imperfections of the JJs and have relaxed requirements on the RF electronics driving the JJA, compared to the existing CWD JVSs and PD JVSs, respectively. By use of the JJA chip at the National Measurement Institute Australia, we demonstrate its feasibility to generate voltages up to 1 V. Preliminary evaluation of the system shows that the voltage uncertainty can be 11 nV (k = 2) or better and the theoretical resolution is better than 1 nV from 0 V to 1 V. The main requirement is that all the JJs must have quantum locking ranges with respect to the power and frequency of the RF bias and for the PD JJAs to have a constant voltage over a range of dc bias current. Although this development is not a replacement for existing state-of-the-art JVSs, we anticipate that it will be an alternative fit-for-purpose solution for metrological applications under non-ideal operating conditions or when the components of the state-of-the-art solutions are not available.
The paper is about development of the lumped Josephson junction arrays (JJAs) for the generation of accurate quantum-based ac voltages. By using semiconductor pattern generators, it was possible to synthesize unipolar and bipolar waveforms with amplitudes of almost 10 mV and frequencies of up to 122 kHz. Higher harmonics and other unwanted noise signals were suppressed by -90 dBc. Because of the unique layout of our JJA, it was possible to connect the circuit directly to the ground, thereby eliminating common-mode signals
The output voltage of Josephson arbitrary waveform synthesizers (JAWS) is limited by the number of Josephson junctions (JJs) that can be driven by a single pulse-generator channel. Here, we double the number of JJs driven by one generator channel to 51 200 JJs by distributing the pulse bias between four JJ arrays by use of two layers of Wilkinson dividers. We use this single bias to generate a voltage at 1 kHz with an rms magnitude of 1 V. This voltage is quantum-accurate over an operating current range of 1.4 mA. For comparison, the operating current range of a recent design that uses a single layer of Wilkinson dividers is twice as large, but requires two pulse-bias channels to generate 1 V. We also show that we can recover this performance by incorporating in the pulse generator a finite-impulse response (FIR) filter that acts as an equalizer. The FIR filter creates a custom transfer function that compensates for the bandwidth-limited transfer function of the Wilkinson dividers. Optimizing the FIR filter parameters increases the operating current range from 1.4 to 2.7 mA. This ability to drive additional JJ arrays with a single pulse-generator channel will enable future JAWS chips and systems to achieve significantly larger output voltages. This will increase the voltage range for JAWS calibrations of ac thermal converters and improve precision voltage measurements that require quantum-accurate, stable, and distortion-free waveforms with a large signal-to-noise ratio.
Quantum-accurate arbitrary voltage waveforms have been generated using electrical pulse driven Josephson junction arrays (JJAs) by several groups [1, 2]. An alternative method is to use optoelectronic components to convert the electrical pulse drive into an optical signal which is subsequently converted by a photodiode into an electrical drive signal connected directly to the JJA. This optoelectronic pulse drive system has several advantages. Due to the electrical isolation between electrical pulse drive and JJA, it is possible to connect several arrays in series without the requirement for complex electrical compensation circuits. This allows larger output voltages to be realized. An optoelectronic drive also offers the ability to easily tune pulse height, via continuous optical attenuation, allowing the drive signal to be tuned to the middle of the JJA constant voltage step giving optimum operation margins. We here present an optoelectronic pulse drive which forms part of a system incorporating a JJA and delta sigma feedback loop [3] for quantum-accurate digitization of arbitrary voltage waveforms. Results showing the generation of quantum-accurate voltages synchronized to the feedback loop master clock are presented.