Återverkansfri kvantmätning med frekvensdubbling
Linus Ekberg
Abstract
Quantum non-demolition (QND) measurements allow information about a quantum state to be extracted without adding significant back-action, and is a building block for noise suppression, noiseless amplification and photonic quantum information processing. Conventional non-QND schemes based on beamsplitters are fundamentally limited by vacuum noise entering through the unused port. This thesis investigates experimentally, to our knowledge for the first time, a feedforward scheme in which second-harmonic generation (SHG) replacesthe beamsplitter, so that a copy of the field is created without coupling in additional vacuum modes. The scheme is compared to an equivalent beamsplitter (BS) feedforward setup, usingcommercially available fiber-coupled components and a continuous-wave laser at 1545 nm. The theoretical model of previous work is extended to include losses in the signal and meter arms. The model predicts that SHG outperforms the beamsplitter in both noise suppression and QND performance, and that amplitude squeezing is possible provided that the conversionefficiency exceeds roughly 40%, even with losses of up to 50% in each arm and noise 10 dB above the quantum limit. Experimentally, intensity noise of the laser was suppressed by up to 7 dB at approximately 100kHz, at a level comparable to the beamsplitter setups despite the low conversion efficiencyranging from less than 1% to 11%. The noise suppression band width is likely limited bythe time delay between the feedforward arms. The measured transfer coefficients of thebeamsplitters were close to the theoretical values, while the SHG setup gave no measurable meter signal, owing to the low conversion efficiency. High losses of 10.2 dB in the signal arm impacted the QND performance. Due to these limitations, the experiment did not manage to achieve true QND. Despite this,the high noise suppression and low conditional variance of the second harmonic shows great promise and motivates further experiments to work towards realizing the theoretical results shown in this thesis.