Arrays of identical neutral atoms trapped in optical tweezers are a promising candidate for use in quantum computing. These platforms are highly scalable to large numbers of qubits and neutral atoms boost several attractive features as long coherence times and the possibility to be entangled via strong dipole-dipole interactions by driving them to highly excited Rydberg states. \nThe Thesis work is developed inside the framework of the QRydDemo project, whose aim in the next few years is to realize a neutral atom quantum processor with several hundred qubits. The smallest building blocks for the quantum computer are one and two-qubit gates: to entangle two atoms in the quantum register, a controlled-phase (CZ) gate will be implemented by shining fine-tuned laser pulses onto them. In this work, after giving a theoretical description of the Hamiltonian of two neutral atoms in the quantum register, a numerical simulation of this system is exploited to reproduce the behavior of the two-qubit CZ gate. Realistic effects are taken into account as finite temperature, imperfect Rydberg blockade, or decay out of the Rydberg state. A protocol with constant pulses is analyzed and its optimal parameters are found through classical optimizers. Then, time-dependent pulses are introduced and the optimal pulses are found through the optimal control algorithm dCRAB in an open-loop optimization. For the experimental realization of the gate, this analysis is of pivotal importance to know in which aspect more effort has to be put to maximize the experimental precision of the operation and thus improving the performance of the whole device \n
Arrays of identical neutral atoms trapped in optical tweezers are a promising candidate for use in quantum computing. These platforms are highly scalable to large numbers of qubits and neutral atoms boost several attractive features as long coherence times and the possibility to be entangled via strong dipole-dipole interactions by driving them to highly excited Rydberg states. \nThe Thesis work is developed inside the framework of the QRydDemo project, whose aim in the next few years is to realize a neutral atom quantum processor with several hundred qubits. The smallest building blocks for the quantum computer are one and two-qubit gates: to entangle two atoms in the quantum register, a controlled-phase (CZ) gate will be implemented by shining fine-tuned laser pulses onto them. In this work, after giving a theoretical description of the Hamiltonian of two neutral atoms in the quantum register, a numerical simulation of this system is exploited to reproduce the behavior of the two-qubit CZ gate. Realistic effects are taken into account as finite temperature, imperfect Rydberg blockade, or decay out of the Rydberg state. A protocol with constant pulses is analyzed and its optimal parameters are found through classical optimizers. Then, time-dependent pulses are introduced and the optimal pulses are found through the optimal control algorithm dCRAB in an open-loop optimization. For the experimental realization of the gate, this analysis is of pivotal importance to know in which aspect more effort has to be put to maximize the experimental precision of the operation and thus improving the performance of the whole device \n
A neutral-atom system serves as a promising platform for realizing gate-based quantum computing because of its capability to trap and control several atomic qubits in different geometries and the ability to perform strong, long-range interactions between qubits; however, the two-qubit entangling gate fidelity lags behind competing platforms such as superconducting systems and trapped ions. The aim of our work is to design a fast, robust, high-fidelity controlled-Z (cz) gate, based on the Rydberg-blockade mechanism, for neutral atoms. We propose a gate procedure that relies on simultaneous and transitionless quantum driving of a pair of atoms using broadband lasers. By simulating a system of two interacting cesium atoms, including spontaneous emission from excited levels and parameter fluctuations, we yield a Rydberg-blockade cz gate with fidelity 0.9985 over an operation time of $0.12\phantom{\rule{3.33333pt}{0ex}}\mathrm{\textmu{}s}$. Our gate procedure delivers cz gates that are superior than the state-of-the-art experimental cz gate and the simulated cz gates based on adiabatic driving of atoms. Our results show that our gate procedure carries significant potential for achieving scalable quantum computing using neutral atoms.
We have numerically simulated a two-qubit CZ gate for ultracold neutral atoms based on Rydberg blockade, utilizing three-photon excitation to Rydberg states. The three-photon laser excitation overcomes lack of individual addressability for entangling gates in atomic arrays, which is a key limitation of conventional schemes of quantum information processing with neutral atoms. This is achieved by mitigating sensitivity to laser intensity fluctuations caused by spatial motion of atoms in optical tweezers. Our goal is to investigate the gate performance when three-photon laser excitation is used. We considered Levine-Pichler gate which applies an abrupt phase jump at the center of the control laser pulse. Our simulation accounts for the influence of spontaneous decay of intermediate and Rydberg states and finite Rydberg excitation energies. We obtained the maximum fidelity of the CZ gate around 99.7% for the model based on probability amplitudes and 99.72% for the model based on density matrices. This value exceeds the threshold required for the application of quantum error correction protocols, demonstrating the promise of this gate for experimental realization. This work was supported by BASIS foundation Grant No. № 25-1-1-57-5
Arrays of optically trapped neutral atoms are an emerging platform for scalable quantum computing, where achieving high-fidelity entangling gates remains a central challenge. We present a systematic analysis of the two-qubit controlled-Z (cz) gate under finite Rydberg blockade, paying particular attention to the influence of near-degenerate Rydberg pair states and resonant dipole-dipole interactions. Using the global two-pulse excitation protocol, we model the full gate dynamics, explicitly capturing population leakage into noncomputational states. By analyzing the interplay between the control parameters such as Rabi frequency, detuning, the F\"orster defect, and interaction strength, we identify conditions that enable fast, high-fidelity gate operation while minimizing leakage. We also quantify the impact of finite Rydberg-state lifetimes on gate error and further demonstrate that the optimal parameter regimes identified here are accessible in current rubidium-based tweezer experiments. These results provide practical guidance for optimizing two-qubit gate protocols in neutral-atom quantum processors with experimentally accessible conditions.
Neutral atom quantum computing utilizes laser-trapped neutral atoms as qubits and realizes quantum logic gate operations through Rydberg-state interactions. In recent years, it has become one of the most vibrant directions in quantum computing hardware. This paper systematically reviews the working principles of neutral-atom quantum computers, including qubit encoding, atom trapping and manipulation, Rydberg states and interactions, the Rydberg blockade quantum gate mechanism, and atom rearrangement with reconfigurable architectures. The mainstream technical routes are surveyed, represented by optical tweezer arrays combined with Rydberg interactions, optical lattice schemes, and dipole trap arrays. A panoramic review is provided of domestic and international research progress from theoretical foundations in 2000 to the latest achievements in 2026, including thousand-qubit-scale systems, logical qubits, and quantum error correction experiments. Key breakthroughs are highlighted, such as the 6100-atom qubit array, continuous operation of a 3000-qubit system, quantum simulation of the Kitaev honeycomb model, toric code error correction demonstrations, encoding rates exceeding 1/2, and fault-tolerant architectures. The core bottlenecks are analyzed in depth, including the scalability--fidelity trade-off, engineering implementation of quantum error correction, atom loss and mid-circuit replenishment, laser system industrialization, control electronics scalability, and long-distance quantum interconnection. This paper aims to provide a systematic reference for academic research and technological development in this field.
Abstract High-fidelity controlled-Z (CZ ) gates are essential and mandatory to build a large-scale quantum computer. In neutral atoms, the strong dipole–dipole interactions between their Rydberg states make them one of the pioneering platforms to implement CZ gates. Here we numerically investigate the optimized pulses to generate a high-fidelity Rydberg C Z gate in a three-level ladder-type atomic system. By tuning the temporal shapes of Gaussian or segmented pulses, the populations on the intermediate excited states are shown to be suppressed within the symmetric gate operation protocol, which leads to a C Z gate with a high Bell fidelity up to 99.92 % . These optimized pulses are robust to thermal fluctuations and the excitation field variations. Our results promise a high-fidelity and fast gate operation under amenable and controllable experimental parameters, which goes beyond the adiabatic operation regime under a finite blockade strength.
Neutral atoms, trapped in optical tweezers and lattices, have gained significant attention owing to advances in laser technologies, control hardware, and innovative experimental techniques. These systems offer unique advantages such as long coherence times, natural homogeneity, and scalability, while also presenting challenges related to gate speed limitations, atom loss, slow measurements, and other imperfections. Quantum control theory has emerged as a crucial tool for advancing these technologies by enabling precise manipulation of atoms. In this thesis, we review the foundational concepts in quantum control theory, outlining both analytical approaches and numerical optimization techniques, including methods to account for experimental imperfections. A concise overview of neutral atom platforms follows, covering two distinct operational regimes: Rydberg atoms in optical tweezers and fermionic atoms in optical superlattices. The core of the thesis is dedicated to our work addressing practical control problems in neutral atom systems. First, we develop a platform-independent method for estimating and compensating nonlinear pulse distortions in experimental setups and demonstrate its use numerically for Rydberg atom excitations. Next, we tackle the challenge of implementing fast and robust gates in fermionic atom systems trapped in superlattices by optimizing lattice depths. Finally, we explore the application of Rydberg-based analog quantum simulators for variational quantum eigensolvers, using Lie-algebraic tools to analyze symmetry restrictions. This work highlights the essential role of quantum control methods in enhancing the fidelity, robustness, and applicability of neutral atom quantum technologies. It also demonstrates how combining theoretical tools, numerical optimization, and experimental considerations leads to practical solutions for scalable and high-performance quantum systems. The methods and insights developed here also offer transferable strategies for other quantum hardware architectures.