Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE International Conference on Recent Advances in Electronics, Communication, Computing, Automation and Power (RECCAP)

Novel Lightweight and Secure Group Authentication and Key Establishment in IoT

K. Nimmy, Ajith Abraham Ben, Amitha M Das

Published May 1, 2026• 0 citations
Publisher

Abstract

The Internet of Things (IoT) has become an integral part of modern life, with the number of connected devices increasing exponentially. Ensuring secure authentication among millions of such interconnected devices, along with the efficient distribution and management of secret keys, poses significant research challenges. Traditional one-to-one authentication schemes often overlook the stringent resource constraints of IoT devices and fail to address the scalability requirements of massive networks. In contrast, group authentication schemes (GASs) have emerged as promising solutions for many-to-many authentication, enabling simultaneous verification of multiple resource-constrained devices. However, most existing GASs remain energy-inefficient and lack the robustness required for large-scale deployment. To address these limitations, this paper proposes a novel, lightweight, and scalable group authentication scheme leveraging Physically Unclonable Functions (PUFs) to achieve enhanced security and efficiency in IoT environments. The security analysis using AVISPA and comparison with existing schemes reveal that the proposed protocol is secure and suitable for IoT networks.

DOI
10.1109/reccap69368.2026.11723919

Related papers

Lightweight Anonymous Group Authentication and Quantum-Cloud Key Distribution Based on PUF for Classical Network Environments

Huanjie Zhang, Yang Chen, Shenghao Chen +2 more

With the rapid development of quantum computing, in response to its disruptive threats to traditional cryptosystems and the urgent demand for lightweight and highly scalable secure group communication among resource-constrained devices in large-scale Internet of Things (IoT) scenarios, this paper proposes a lightweight anonymous group authentication scheme that integrates Physical Unclonable Functions (PUFs), distributed Gossip algorithms, and quantum key distribution. By exploiting the uniqueness and unclonability derived from the inherent physical characteristics of PUF hardware, the scheme fundamentally eliminates attack vectors against quantum computers without requiring devices to pre-store any secret keys in their memory, while the QKCS pre-provisions CRPs and key seeds, which is the standard enrollment procedure in PUF-based systems. Combined with information-theoretically secure quantum keys as session keys, it forms a dual protection mechanism: anti-forgery at the physical layer and anti-quantum attack at the cryptographic layer. Innovatively, the Gossip algorithm is deeply integrated with group key agreement, converting global broadcast into local iterative interactions between nodes, which effectively alleviates broadcast storms and improves the scalability and fault tolerance of the protocol. Meanwhile, a pseudonym mechanism is introduced to achieve anonymous identity protection, and a dynamic key update strategy guarantees forward and backward security when members join or leave the group. Formal verification based on BAN logic and security analysis show that the proposed protocol can resist typical attacks such as replay attacks, man-in-the-middle attacks, and impersonation attacks. Performance evaluations demonstrate that our scheme outperforms existing comparable schemes in terms of computational cost, communication overhead, and dynamic group management efficiency, demonstrating its potential for resource-constrained IoT environments, pending further validation on real hardware platforms.

Sensors•Jul 31, 2026•0 citations

ALPAK: (Anonymized Lightweight PUF-based group Authentication with Key distribution) for IoT Devices

Konjengbam Roshan Singh, Divyashikha Sethia

Securing applications that gather and transfer confidential information has become a critical challenge in the rapidly evolving Internet of Things (IoT) landscape. Such data’s authenticity, integrity, and confidentiality must be guaranteed while reducing security functions’ computation and communication overhead to accommodate the numerous constrained devices involved. Group authentication and key management are essential aspects of IoT security, but existing protocols often need to be more computationally expensive for IoT applications and must take care of anonymization. Consequently, IoT devices may be open to potential cyber-attacks due to the use of simple security primitives. Physically Unclonable Function (PUF) can enable in lightweight approach to authentication and key distribution among group members. The factorial tree and Chinese Remainder Theorem (CRT) can minimize communication messages required to renew the keys. This paper presents a novel protocol, Anonymized Lightweight PUF-based group Authentication with Key distribution (ALPAK) for IoT Devices, which improves the PUF-Based Lightweight Group Authentication and Key Distribution Protocol (PLGAKD) to enhance the anonymity of IoT devices. The paper further presents the formal verification of the ALPAK scheme with the Scyther tool and detailed security analysis.

International Conference on Computing, Communication and Networking Technologies (ICCCNT)•Jul 6, 2023•1 citation

A Novel Quantum-Based Authentication Method for IoT Devices using Quantum Physical Unclonable Functions

M. Premalatha, D. Narendar Singh

The Internet of Things (IoT) has ushered in significant advancements in networked technologies, yet it simultaneously raises concerns about the security and privacy of connected devices. Traditional authentication methods based on cryptographic protocols are increasingly vulnerable to attacks as the number of devices grows and attackers develop more sophisticated strategies. In this paper, we propose a novel quantum-based authentication method using Quantum Physical Unclonable Functions (QPUFs) to address the security challenges in IoT devices. Quantum PUFs exploit the inherent quantum properties of devices to generate unique, unclonable responses to challenges, providing a high level of security and resilience against attacks such as cloning, spoofing, and interception. We present the architecture of the proposed quantum authentication system, discuss the challenge-response protocol, and evaluate the system’s performance. Experimental results show that this approach offers strong security guarantees with minimal computational overhead. We Evaluate the Security, Scalability of our approach in simulated adverse IoT environment.

International Journal of Engineering and Manufacturing•Apr 8, 2026•0 citations

Lightweight Anonymous Key Sharing Authentication Protocol for Resource-Constrained IoT Devices

Gunawan Widjaja

The Internet of Things (IoT), as a new type of communication network, is involved in developing and applying secure transmission and storing a large amount of sensitive information. Due to the IoT devices' constrained resources, high connection costs, sluggish transmission speeds, and the inapplicability of security fundamentals like public key methods and digital signatures for simple device authentication, this paper presents a lightweight anonymous key-sharing authentication protocol for IoT devices. The protocol utilizes the tamper-resistant and anti-cloning properties of Hardware Physical Unclonable Functions (PUFs) to generate shared keys. In addition, it incorporates security primitives such as the MASK algorithm and Hash functions. The security analysis and verification using Ban logic and the proper tool ProVerif demonstrate that the protocol can defend against attacks such as man-in-the-middle, de-synchronization, impersonation, and modeling attacks. Compared with other protocols, this protocol exhibits the characteristics of low computational cost, minimal communication overhead and storage capacity, and high-security performance, making it suitable for secure communication and transmission in resource-constrained devices.

International Conference On Smart Technologies For Smart Nation (SmartTechCon)•Aug 18, 2023•0 citations

Physical layer security for IoT applications

Miroslav Mitev

The increasing demands for Internet of things (IoT) applications and the tremendous increase in the volume of IoT generated data bring novel challenges for the fifth generation (5G) network. Verticals such as e-Health, vehicle to everything (V2X) and unmanned aerial vehicles (UAVs) require solutions that can guarantee low latency, energy efficiency,massive connectivity, and high reliability. In particular, finding strong security mechanisms that satisfy the above is of central importance for bringing the IoT to life. \nIn this regards, employing physical layer security (PLS) methods could be greatly beneficial for IoT networks. While current security solutions rely on computational complexity, PLS is based on information theoretic proofs. By removing the need for computational power, PLS is ideally suited for resource constrained devices. In detail, PLS can ensure security using the inherit randomness already present in the physical channel. Promising schemes from the physical layer include physical unclonable functions (PUFs), which are seen as the hardware fingerprint of a device, and secret key generation (SKG) from wireless fading coefficients, which provide the wireless fingerprint of the communication channel between devices. \nThe present thesis develops several PLS-based techniques that pave the way for a new breed of latency-aware, lightweight, security protocols. In particular, the work proposes: i) a fast multi-factor authentication solution with verified security properties based on PUFs, proximity detection and SKG; ii) an authenticated encryption SKG approach that interweaves data transmission and key generation; and, iii) a set of countermeasures to man-in-the-middle and jamming attacks. Overall, PLS solutions show promising performance, especially in the context of IoT applications, therefore, the advances in this thesis should be considered for beyond-5G networks.

•Dec 1, 2020•1 citation

Authenticated Key Agreement Protocol for Device-to-Gateway Communication in IoT

Cong Pu, Jongho Seol, Nohpill Park +1 more

The advent of Internet of Things (IoT) ushers in a significant potential to integrate individuals, devices, and data, leading to a profound change in our professional and social environments. The small, resource-constrained IoT devices are usually deployed to collect various types of critical data in remote or unmonitored locations. Due to extensive interconnectivity, limited resources, and inadequate security design, IoT systems are vulnerable to communication-specific cyber threats, which aim to disrupt operations, steal sensitive information, or cause damage. To resolve the security concerns in IoT communications, many recent efforts have been devoted to designing authenticated key agreement protocols for IoT systems. However, not only most of the existing solutions fail to adopt cost-effective techniques for resource-limited IoT devices, but also they ignore the differentiation among various data types in the established session keys. A few approaches use traditional physical unclonable functions (PUFs) to address resource concerns, yet they introduce new security issues into IoT systems. Once the PUF cryptographic information is compromised by machine learning attacks, the entire authentication framework collapses. Therefore, in this paper we propose an authenticated key agreement protocol for device-to-gateway communication in IoT systems based on Chebyshev polynomial and probability-based PUF. We examine the proposed protocol’s security features through formal security validation. We also conduct performance evaluation through a simulation-oriented study, and the results clearly prove that the proposed protocol offers superior security and privacy, while maintaining low computational overhead.

IEEE Consumer Communications and Networking Conference•Jan 9, 2026•2 citations
The Internet of Things (IoT) has become an integral part of modern life, with the number of connected devices increasing exponentially. Ensuring secure authentication among millions of such interconnected devices, along with the efficient distribution and management of secret keys, poses significant research challenges. Traditional one-to-one authentication schemes often overlook the stringent resource constraints of IoT devices and fail to address the scalability requirements of massive networks. In contrast, group authentication schemes (GASs) have emerged as promising solutions for many-to-many authentication, enabling simultaneous verification of multiple resource-constrained devices. However, most existing GASs remain energy-inefficient and lack the robustness required for large-scale deployment. To address these limitations, this paper proposes a novel, lightweight, and scalable group authentication scheme leveraging Physically Unclonable Functions (PUFs) to achieve enhanced security and efficiency in IoT environments. The security analysis using AVISPA and comparison with existing schemes reveal that the proposed protocol is secure and suitable for IoT networks.
With the rapid development of quantum computing, in response to its disruptive threats to traditional cryptosystems and the urgent demand for lightweight and highly scalable secure group communication among resource-constrained devices in large-scale Internet of Things (IoT) scenarios, this paper proposes a lightweight anonymous group authentication scheme that integrates Physical Unclonable Functions (PUFs), distributed Gossip algorithms, and quantum key distribution. By exploiting the uniqueness and unclonability derived from the inherent physical characteristics of PUF hardware, the scheme fundamentally eliminates attack vectors against quantum computers without requiring devices to pre-store any secret keys in their memory, while the QKCS pre-provisions CRPs and key seeds, which is the standard enrollment procedure in PUF-based systems. Combined with information-theoretically secure quantum keys as session keys, it forms a dual protection mechanism: anti-forgery at the physical layer and anti-quantum attack at the cryptographic layer. Innovatively, the Gossip algorithm is deeply integrated with group key agreement, converting global broadcast into local iterative interactions between nodes, which effectively alleviates broadcast storms and improves the scalability and fault tolerance of the protocol. Meanwhile, a pseudonym mechanism is introduced to achieve anonymous identity protection, and a dynamic key update strategy guarantees forward and backward security when members join or leave the group. Formal verification based on BAN logic and security analysis show that the proposed protocol can resist typical attacks such as replay attacks, man-in-the-middle attacks, and impersonation attacks. Performance evaluations demonstrate that our scheme outperforms existing comparable schemes in terms of computational cost, communication overhead, and dynamic group management efficiency, demonstrating its potential for resource-constrained IoT environments, pending further validation on real hardware platforms.
Securing applications that gather and transfer confidential information has become a critical challenge in the rapidly evolving Internet of Things (IoT) landscape. Such data’s authenticity, integrity, and confidentiality must be guaranteed while reducing security functions’ computation and communication overhead to accommodate the numerous constrained devices involved. Group authentication and key management are essential aspects of IoT security, but existing protocols often need to be more computationally expensive for IoT applications and must take care of anonymization. Consequently, IoT devices may be open to potential cyber-attacks due to the use of simple security primitives. Physically Unclonable Function (PUF) can enable in lightweight approach to authentication and key distribution among group members. The factorial tree and Chinese Remainder Theorem (CRT) can minimize communication messages required to renew the keys. This paper presents a novel protocol, Anonymized Lightweight PUF-based group Authentication with Key distribution (ALPAK) for IoT Devices, which improves the PUF-Based Lightweight Group Authentication and Key Distribution Protocol (PLGAKD) to enhance the anonymity of IoT devices. The paper further presents the formal verification of the ALPAK scheme with the Scyther tool and detailed security analysis.
The Internet of Things (IoT) has ushered in significant advancements in networked technologies, yet it simultaneously raises concerns about the security and privacy of connected devices. Traditional authentication methods based on cryptographic protocols are increasingly vulnerable to attacks as the number of devices grows and attackers develop more sophisticated strategies. In this paper, we propose a novel quantum-based authentication method using Quantum Physical Unclonable Functions (QPUFs) to address the security challenges in IoT devices. Quantum PUFs exploit the inherent quantum properties of devices to generate unique, unclonable responses to challenges, providing a high level of security and resilience against attacks such as cloning, spoofing, and interception. We present the architecture of the proposed quantum authentication system, discuss the challenge-response protocol, and evaluate the system’s performance. Experimental results show that this approach offers strong security guarantees with minimal computational overhead. We Evaluate the Security, Scalability of our approach in simulated adverse IoT environment.
The Internet of Things (IoT), as a new type of communication network, is involved in developing and applying secure transmission and storing a large amount of sensitive information. Due to the IoT devices' constrained resources, high connection costs, sluggish transmission speeds, and the inapplicability of security fundamentals like public key methods and digital signatures for simple device authentication, this paper presents a lightweight anonymous key-sharing authentication protocol for IoT devices. The protocol utilizes the tamper-resistant and anti-cloning properties of Hardware Physical Unclonable Functions (PUFs) to generate shared keys. In addition, it incorporates security primitives such as the MASK algorithm and Hash functions. The security analysis and verification using Ban logic and the proper tool ProVerif demonstrate that the protocol can defend against attacks such as man-in-the-middle, de-synchronization, impersonation, and modeling attacks. Compared with other protocols, this protocol exhibits the characteristics of low computational cost, minimal communication overhead and storage capacity, and high-security performance, making it suitable for secure communication and transmission in resource-constrained devices.
The increasing demands for Internet of things (IoT) applications and the tremendous increase in the volume of IoT generated data bring novel challenges for the fifth generation (5G) network. Verticals such as e-Health, vehicle to everything (V2X) and unmanned aerial vehicles (UAVs) require solutions that can guarantee low latency, energy efficiency,massive connectivity, and high reliability. In particular, finding strong security mechanisms that satisfy the above is of central importance for bringing the IoT to life. \nIn this regards, employing physical layer security (PLS) methods could be greatly beneficial for IoT networks. While current security solutions rely on computational complexity, PLS is based on information theoretic proofs. By removing the need for computational power, PLS is ideally suited for resource constrained devices. In detail, PLS can ensure security using the inherit randomness already present in the physical channel. Promising schemes from the physical layer include physical unclonable functions (PUFs), which are seen as the hardware fingerprint of a device, and secret key generation (SKG) from wireless fading coefficients, which provide the wireless fingerprint of the communication channel between devices. \nThe present thesis develops several PLS-based techniques that pave the way for a new breed of latency-aware, lightweight, security protocols. In particular, the work proposes: i) a fast multi-factor authentication solution with verified security properties based on PUFs, proximity detection and SKG; ii) an authenticated encryption SKG approach that interweaves data transmission and key generation; and, iii) a set of countermeasures to man-in-the-middle and jamming attacks. Overall, PLS solutions show promising performance, especially in the context of IoT applications, therefore, the advances in this thesis should be considered for beyond-5G networks.
The advent of Internet of Things (IoT) ushers in a significant potential to integrate individuals, devices, and data, leading to a profound change in our professional and social environments. The small, resource-constrained IoT devices are usually deployed to collect various types of critical data in remote or unmonitored locations. Due to extensive interconnectivity, limited resources, and inadequate security design, IoT systems are vulnerable to communication-specific cyber threats, which aim to disrupt operations, steal sensitive information, or cause damage. To resolve the security concerns in IoT communications, many recent efforts have been devoted to designing authenticated key agreement protocols for IoT systems. However, not only most of the existing solutions fail to adopt cost-effective techniques for resource-limited IoT devices, but also they ignore the differentiation among various data types in the established session keys. A few approaches use traditional physical unclonable functions (PUFs) to address resource concerns, yet they introduce new security issues into IoT systems. Once the PUF cryptographic information is compromised by machine learning attacks, the entire authentication framework collapses. Therefore, in this paper we propose an authenticated key agreement protocol for device-to-gateway communication in IoT systems based on Chebyshev polynomial and probability-based PUF. We examine the proposed protocol’s security features through formal security validation. We also conduct performance evaluation through a simulation-oriented study, and the results clearly prove that the proposed protocol offers superior security and privacy, while maintaining low computational overhead.