Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE International Symposium on Personal, Indoor and Mobile Radio Communications (PIMRC)

Impairments Characterisation for Deployable Rydberg Atomic Quantum Receivers

Ainara Kazymova, Tierui Gong, Yong Liang Guan, Chau Yuen

Published Sep 1, 2026• 0 citations
Publisher

Abstract

Rydberg atomic quantum receivers (RAQRs) recently gained significant interest. However, their impairments characterisation, which is critical for practical deployments, remains under-examined. In this paper, we evaluate how deviations in five operational parameters (atomic density, EIT linewidth, local oscillator (LO) amplitude, laser frequency, and probe power) impact the signal-to-noise ratio (SNR), third-order intercept (IIP3), 1 dB compression $\left(P_{1 \mathrm{~dB}}\right)$, and spurious-free dynamic range (SFDR). By expanding the atomic coherence in powers of signal amplitude, we classify deviation responses into three distinct categories. All three categories remain robust under Doppler broadening from $200 \mu \mathrm{~K}$ to 300 K. Crucially, the LO amplitude falls into a regime where IIP3 degrades linearly while the SNR changes only quadratically. As this linearity loss can go easily undetected during standard sensitivity checks, LO amplitude requires tightest control (+7% tolerance). We further derive two closed-form relationships governing the RAQRs. The first one features how much the SNR can be improved as atomic density increases, yielding improvement equal to or less than 20 dB for every tenfold increase in atomic density. The second one shows that a laser frequency drift of about 55 kHz reduces the SNR by an order of 1 dB.

DOI
10.1109/pimrc69400.2026.11711725

Related papers

Rydberg Atomic Quantum Receivers for Classical Wireless Communications and Sensing: Their Models and Performance

Tierui Gong, Jiaming Sun, Chau Yuen +6 more

The significant progress of quantum sensing technologies offer numerous radical solutions for measuring a multitude of physical quantities at an unprecedented precision. Among them, Rydberg atomic quantum receivers (RAQRs) emerge as an eminent solution for detecting the electric field of radio frequency (RF) signals, exhibiting great potential in assisting classical wireless communications and sensing. So far, most experimental studies have aimed for the proof of physical concepts to reveal its promise, while the practical signal model of RAQR-aided wireless communications and sensing remained under-explored. Furthermore, the performance of RAQR-based wireless receivers and their advantages over classical RF receivers have not been fully characterized. To fill these gaps, we introduce the RAQR to the wireless community by presenting an end-to-end reception scheme. We then develop a corresponding equivalent baseband signal model relying on a realistic reception flow. Our scheme and model provide explicit design guidance to RAQR-aided wireless systems. We next study the performance of RAQR-aided wireless systems based on our model, and compare them to classical RF receivers. The results show that Doppler broadening-free RAQRs are capable of achieving a substantial received signal-to-noise ratio (SNR) gain of over 27 decibel (dB) and 40 dB in the photon shot limit and standard quantum limit regimes, respectively.

arXiv:2412.05554•IEEE Transactions on Communications•Jan 1, 2026•26 citations

Nonlinearities in atomic radio receivers: Harmonic and intermodulation distortion

Luís F. Gonçalves, Teng Zhang, Georg A. Raithel +1 more

Rydberg sensors offer a unique approach to radio-frequency (rf) detection, leveraging the high sensitivity and quantum properties of highly excited atomic states to achieve performance levels beyond classical technologies. Nonlinear responses and distortion behavior in Rydberg atom receivers are critical to evaluating and establishing performance metrics and capabilities such as spur-free dynamic range and tolerance to unwanted interfering signals. We report here on the measurement and characterization of nonlinear behavior and spurious response of a Rydberg atomic heterodyne receiver. Single-tone and two-tone testing procedures are developed and implemented for measurement of harmonic and intermodulation distortion in Rydberg atomic receivers based on multiphoton Rydberg spectroscopy and radio-frequency heterodyne signal detection and demodulation in an atomic vapor. For a predetermined set of atomic receiver parameters and rf carrier wave in the super high frequency band near-resonant to a cesium Rydberg transition, we measure and characterize atomic receiver selectivity, bandwidth, roll-off, compression point (P1dB), second-order (IP2) and third-order (IP3) intercepts, and spur-free dynamic range. Receiver intermodulation distortion is characterized for the case of an interfering signal wave applied at two frequency offsets relative to the near-resonant reference local oscillator, Δ F / F = 10 − 4 at 6 dB and 10 − 6 at 22 dB single-tone bandwidths, respectively. We observe that under suitable operating conditions the atomic receiver can exhibit a suppression of harmonic and intermodulation distortion relative to that of classical receiver mixer amplifiers.

arXiv:2412.16366•APS Open Science•Jul 14, 2026•3 citations

Coverage Analysis of Rydberg Atom Quantum Receiver Arrays: A Stochastic Geometry Approach

Dongnan Xia, Cunhua Pan, Hong Ren +3 more

Rydberg atomic quantum receivers (RAQRs) offer quantum-limited sensitivity and broadband tunability. It is not obvious whether this device-level advantage also improves network reliability, since in dense deployments, aggregate interference can push the atomic transducer out of its small-signal regime. This paper addresses the question by embedding the RAQR front end into a stochastic geometry (SG) coverage analysis. Starting with the atomic master equation and balanced coherent optical detection, we derive a third-order complex baseband model that retains both the linear gain and the leading cubic nonlinearity. A Bussgang decomposition converts the per-element nonlinear response into an equivalent linear gain plus a distance-dependent distortion noise. Using this equivalent model, we derive the post maximal-ratio combining (MRC) SINR and obtain tractable expressions for the conditional and spatially averaged coverage probabilities. The analytical results show that RAQRs outperform conventional receivers in sparse deployments. However, when the base station (BS) density becomes large, nonlinear distortion reduces this advantage and may make RAQRs perform worse. Simulation results validate the analytical expressions and confirm that the central design tradeoff is between linear gain and cubic nonlinearity.

quant-pharXiv:2605.23214•May 25, 2026•0 citations

Sensitivity enhancement in Rydberg atomic microwave superheterodyne measurements through laser-atom-microwave interaction mechanisms

Zhongzhou Tian, Guojin Zeng, Chao Yan +3 more

Measurement sensitivity is crucial for the practical application of Rydberg atomic microwave superheterodyne receiver systems in communication, radar, and navigation. Based on laser-atom-microwave interaction mechanisms, the influence of laser powers and local-oscillator (LO) microwave field intensity on measurement sensitivity is systematically studied in this paper. Measurement sensitivity is analyzed through electromagnetically induced transparency (EIT) spectral characteristics, specifically EIT amplitude and full-width-half-maximum (FWHM),larger amplitudes and narrower FWHM indicate improved signal-to-noise ratios. For a 60D-state Rydberg atomic system with fixed probe and coupling laser beam waists (800 µm and 875 µm), optimal parameters are determined: probe laser power of 60 µW(Rabi frequency: 2π×7.02 MHz), coupling laser power of 40 mW (Rabi frequency: 2π×0.66 MHz), and LO microwave Rabi frequency of 2π×8.34 MHz. Experimental results demonstrate a 4.6 dB sensitivity enhancement, advancing from −137.5dBm/Hz to −142.1 dBm/Hz at 3.21 GHz microwave field. This improvement is attributed to precise alignment of laser-atom and microwave-atom interactions, bridging the gap toward quantum sensitivity limits.

Applied Optics and Photonics China (AOPC)•Oct 28, 2025•0 citations

Harnessing Rydberg Atomic Receivers: From Quantum Physics to Wireless Communications

Yuanbin Chen, Xufeng Guo, Chau Yuen +5 more

The intrinsic integration of Rydberg atomic receivers into wireless communication systems is proposed, by harnessing the principles of quantum physics in wireless communications. More particularly, we conceive a pair of Rydberg atomic receivers, one incorporates a local oscillator (LO), referred to as an LO-dressed receiver, while the other operates without an LO and is termed an LO-free receiver. The appropriate wireless model is developed for each configuration, elaborating on the receiver's responses to the radio frequency (RF) signal, on the potential noise sources, and on the signal-to-noise ratio (SNR) performance. The developed wireless model conforms to the classical RF framework, facilitating compatibility with established signal processing methodologies. Next, we investigate the associated distortion effects that might occur, specifically identifying the conditions under which distortion arises and demonstrating the boundaries of linear dynamic ranges. This provides critical insights into its practical implementations in wireless systems. Finally, extensive simulation results are provided for characterizing the performance of wireless systems, harnessing this pair of Rydberg atomic receivers. Our results demonstrate that LO-dressed systems achieve a significant SNR gain of approximately 40~50 dB over conventional RF receivers in the standard quantum limit regime. This SNR head-room translates into reduced symbol error rates, enabling efficient and reliable transmission with higher-order constellations.

arXiv:2501.11842•IEEE Transactions on Wireless Communications•Jan 1, 2026•39 citations

Beyond the RF Paradigm: Rydberg Atomic Receivers for Next-Generation IoT

Qihao Peng, Qu Luo, Dongnan Xia +11 more

Next-generation Internet-of-Things (IoT) is evolving toward a ubiquitous, ultra-low-power, and multi-band heterogeneous networking paradigm that seamlessly integrates terrestrial, non-terrestrial, and ambient devices. This vision places unprecedented demands on conventional radio frequency (RF) receivers, whose fundamental bottlenecks in sensitivity, power consumption, coverage, and multi-band operation are rooted in the RF antenna. To tackle these issues, we show that the quantum properties of Rydberg atomic quantum receivers (RAQRs), including ultra-high sensitivity, broad frequency agility, and diverse reception modalities, provide a physically distinct receiver-side path that replaces the conventional antenna-and-low-noise-amplifier chain. Using LoRa, narrowband IoT, and ambient IoT as case studies, this article shows that RAQRs deliver significant gains in weak-uplink, low-power, and battery-free regimes. A stochastic-geometry analysis in cellular and cell-free architectures then maps these device-level gains onto network coverage, where the RAQR retains roughly a 4 dB half-coverage advantage over the RF receiver in sparse deployments at \(λ\sim 10^{-5}~{\mathrm m}^{-2}\), with the gain eroded as device density grows. The open challenges are presented to stand between current RAQR prototypes and deployable IoT infrastructure.

arXiv:2606.01263•May 31, 2026•2 citations
Rydberg atomic quantum receivers (RAQRs) recently gained significant interest. However, their impairments characterisation, which is critical for practical deployments, remains under-examined. In this paper, we evaluate how deviations in five operational parameters (atomic density, EIT linewidth, local oscillator (LO) amplitude, laser frequency, and probe power) impact the signal-to-noise ratio (SNR), third-order intercept (IIP3), 1 dB compression (P1 dB)\left(P_{1 \mathrm{~dB}}\right)(P1 dB​), and spurious-free dynamic range (SFDR). By expanding the atomic coherence in powers of signal amplitude, we classify deviation responses into three distinct categories. All three categories remain robust under Doppler broadening from 200μ K200 \mu \mathrm{~K}200μ K to 300 K. Crucially, the LO amplitude falls into a regime where IIP3 degrades linearly while the SNR changes only quadratically. As this linearity loss can go easily undetected during standard sensitivity checks, LO amplitude requires tightest control (+7% tolerance). We further derive two closed-form relationships governing the RAQRs. The first one features how much the SNR can be improved as atomic density increases, yielding improvement equal to or less than 20 dB for every tenfold increase in atomic density. The second one shows that a laser frequency drift of about 55 kHz reduces the SNR by an order of 1 dB.
The significant progress of quantum sensing technologies offer numerous radical solutions for measuring a multitude of physical quantities at an unprecedented precision. Among them, Rydberg atomic quantum receivers (RAQRs) emerge as an eminent solution for detecting the electric field of radio frequency (RF) signals, exhibiting great potential in assisting classical wireless communications and sensing. So far, most experimental studies have aimed for the proof of physical concepts to reveal its promise, while the practical signal model of RAQR-aided wireless communications and sensing remained under-explored. Furthermore, the performance of RAQR-based wireless receivers and their advantages over classical RF receivers have not been fully characterized. To fill these gaps, we introduce the RAQR to the wireless community by presenting an end-to-end reception scheme. We then develop a corresponding equivalent baseband signal model relying on a realistic reception flow. Our scheme and model provide explicit design guidance to RAQR-aided wireless systems. We next study the performance of RAQR-aided wireless systems based on our model, and compare them to classical RF receivers. The results show that Doppler broadening-free RAQRs are capable of achieving a substantial received signal-to-noise ratio (SNR) gain of over 27 decibel (dB) and 40 dB in the photon shot limit and standard quantum limit regimes, respectively.
Rydberg sensors offer a unique approach to radio-frequency (rf) detection, leveraging the high sensitivity and quantum properties of highly excited atomic states to achieve performance levels beyond classical technologies. Nonlinear responses and distortion behavior in Rydberg atom receivers are critical to evaluating and establishing performance metrics and capabilities such as spur-free dynamic range and tolerance to unwanted interfering signals. We report here on the measurement and characterization of nonlinear behavior and spurious response of a Rydberg atomic heterodyne receiver. Single-tone and two-tone testing procedures are developed and implemented for measurement of harmonic and intermodulation distortion in Rydberg atomic receivers based on multiphoton Rydberg spectroscopy and radio-frequency heterodyne signal detection and demodulation in an atomic vapor. For a predetermined set of atomic receiver parameters and rf carrier wave in the super high frequency band near-resonant to a cesium Rydberg transition, we measure and characterize atomic receiver selectivity, bandwidth, roll-off, compression point (P1dB), second-order (IP2) and third-order (IP3) intercepts, and spur-free dynamic range. Receiver intermodulation distortion is characterized for the case of an interfering signal wave applied at two frequency offsets relative to the near-resonant reference local oscillator, Δ F / F = 10 − 4 at 6 dB and 10 − 6 at 22 dB single-tone bandwidths, respectively. We observe that under suitable operating conditions the atomic receiver can exhibit a suppression of harmonic and intermodulation distortion relative to that of classical receiver mixer amplifiers.
Rydberg atomic quantum receivers (RAQRs) offer quantum-limited sensitivity and broadband tunability. It is not obvious whether this device-level advantage also improves network reliability, since in dense deployments, aggregate interference can push the atomic transducer out of its small-signal regime. This paper addresses the question by embedding the RAQR front end into a stochastic geometry (SG) coverage analysis. Starting with the atomic master equation and balanced coherent optical detection, we derive a third-order complex baseband model that retains both the linear gain and the leading cubic nonlinearity. A Bussgang decomposition converts the per-element nonlinear response into an equivalent linear gain plus a distance-dependent distortion noise. Using this equivalent model, we derive the post maximal-ratio combining (MRC) SINR and obtain tractable expressions for the conditional and spatially averaged coverage probabilities. The analytical results show that RAQRs outperform conventional receivers in sparse deployments. However, when the base station (BS) density becomes large, nonlinear distortion reduces this advantage and may make RAQRs perform worse. Simulation results validate the analytical expressions and confirm that the central design tradeoff is between linear gain and cubic nonlinearity.
Measurement sensitivity is crucial for the practical application of Rydberg atomic microwave superheterodyne receiver systems in communication, radar, and navigation. Based on laser-atom-microwave interaction mechanisms, the influence of laser powers and local-oscillator (LO) microwave field intensity on measurement sensitivity is systematically studied in this paper. Measurement sensitivity is analyzed through electromagnetically induced transparency (EIT) spectral characteristics, specifically EIT amplitude and full-width-half-maximum (FWHM),larger amplitudes and narrower FWHM indicate improved signal-to-noise ratios. For a 60D-state Rydberg atomic system with fixed probe and coupling laser beam waists (800 µm and 875 µm), optimal parameters are determined: probe laser power of 60 µW(Rabi frequency: 2π×7.02 MHz), coupling laser power of 40 mW (Rabi frequency: 2π×0.66 MHz), and LO microwave Rabi frequency of 2π×8.34 MHz. Experimental results demonstrate a 4.6 dB sensitivity enhancement, advancing from −137.5dBm/Hz to −142.1 dBm/Hz at 3.21 GHz microwave field. This improvement is attributed to precise alignment of laser-atom and microwave-atom interactions, bridging the gap toward quantum sensitivity limits.
The intrinsic integration of Rydberg atomic receivers into wireless communication systems is proposed, by harnessing the principles of quantum physics in wireless communications. More particularly, we conceive a pair of Rydberg atomic receivers, one incorporates a local oscillator (LO), referred to as an LO-dressed receiver, while the other operates without an LO and is termed an LO-free receiver. The appropriate wireless model is developed for each configuration, elaborating on the receiver's responses to the radio frequency (RF) signal, on the potential noise sources, and on the signal-to-noise ratio (SNR) performance. The developed wireless model conforms to the classical RF framework, facilitating compatibility with established signal processing methodologies. Next, we investigate the associated distortion effects that might occur, specifically identifying the conditions under which distortion arises and demonstrating the boundaries of linear dynamic ranges. This provides critical insights into its practical implementations in wireless systems. Finally, extensive simulation results are provided for characterizing the performance of wireless systems, harnessing this pair of Rydberg atomic receivers. Our results demonstrate that LO-dressed systems achieve a significant SNR gain of approximately 40~50 dB over conventional RF receivers in the standard quantum limit regime. This SNR head-room translates into reduced symbol error rates, enabling efficient and reliable transmission with higher-order constellations.
Next-generation Internet-of-Things (IoT) is evolving toward a ubiquitous, ultra-low-power, and multi-band heterogeneous networking paradigm that seamlessly integrates terrestrial, non-terrestrial, and ambient devices. This vision places unprecedented demands on conventional radio frequency (RF) receivers, whose fundamental bottlenecks in sensitivity, power consumption, coverage, and multi-band operation are rooted in the RF antenna. To tackle these issues, we show that the quantum properties of Rydberg atomic quantum receivers (RAQRs), including ultra-high sensitivity, broad frequency agility, and diverse reception modalities, provide a physically distinct receiver-side path that replaces the conventional antenna-and-low-noise-amplifier chain. Using LoRa, narrowband IoT, and ambient IoT as case studies, this article shows that RAQRs deliver significant gains in weak-uplink, low-power, and battery-free regimes. A stochastic-geometry analysis in cellular and cell-free architectures then maps these device-level gains onto network coverage, where the RAQR retains roughly a 4 dB half-coverage advantage over the RF receiver in sparse deployments at λ∼10−5 m−2λ\sim 10^{-5}~{\mathrm m}^{-2}λ∼10−5 m−2, with the gain eroded as device density grows. The open challenges are presented to stand between current RAQR prototypes and deployable IoT infrastructure.