Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

International Conference on Transparent Optical Networks

Correlation-Based Thermal Quantum Imaging Using SNSPDs Under Low Signal-to-Noise Conditions

Riccardo Maria Ienco, Giorgia Tortora, Fabio Auriemma, Syed Muhammad Junaid Bukhari, Alessia Sannino, Mikkel Ejrnaes, Daniela Salvoni

Published Jul 1, 2026• 0 citations
Publisher

Abstract

Thermal light is characterized by the phenomenon of photon bunching, which manifests as a higher probability of detecting two photons within a short time interval compared to a purely random distribution. In this work, we propose an imaging system that exploits this temporal correlation by employing innovative SNSPD detectors, which – thanks to their features to be presented – allow only temporally correlated photon pairs to be selected, effectively suppressing uncorrelated background. The system, for which a patent has been filed, offers a superior signal-to-noise ratio compared to intensity-only imaging, particularly under low-light conditions. In the following, we will describe the optical layout of the system, the operating principle based on temporal correlation, the results of simulations of stray light suppression, and the potential applications in low signal-to-noise scenarios.

DOI
10.1109/icton71309.2026.11705218

Related papers

Using Correlated Photons to Suppress Background Noise

Deborah J. Jackson, G. Hockney, Jonathan P. Dowling

A proposed method of suppressing the effect of background noise in an optical communication system would exploit the transmission and reception of correlated photons at the receiver. The method would not afford any advantage in a system in which performance is limited by shot noise. However, if the performance of the system is limited by background noise (e.g., sunlight in the case of a free-space optical communication system or incoherently scattered in-band photons in the case of a fiber-optic communication system), then the proposed method could offer an advantage: the proposed method would make it possible to achieve a signal-to-noise ratio (S/N) significantly greater than that of an otherwise equivalent background- noise-limited optical communication system based on the classical transmission and reception of uncorrelated photons. The figure schematically depicts a classical optical-communication system and a system according to the proposed method. In the classical system, a modulated laser beam is transmitted along an optical path to a receiver, the optics of which include a narrow-band-pass filter that suppresses some of the background noise. A photodetector in the receiver detects the laser-beam and background photons, most or all of which are uncorrelated. In the proposed system, correlated photons would be generated at the transmitter by making a modulated laser beam pass through a nonlinear parametric down-conversion crystal. The sum of frequencies of the correlated photons in each pair would equal the frequency of the incident photon from which they were generated. As in the classical system, the correlated photons would travel along an optical path to a receiver, where they would be band-pass filtered and detected. Unlike in the classical system, the photodetector in the receiver in this system would be one that intrinsically favors the detection of pairs of correlated photons over the detection of uncorrelated photons. Even though there would be no way of knowing the precise location and time of creation of a given pair of correlated signal photons in the nonlinear down-conversion crystal, the fact that the photons are necessarily created at the same time and place makes it possible to utilize conventional geometrical imaging optics to reunite the photons in coincidence in the receiving photodetector. Because most or all of the signal photons would be correlated while most or all of the noise photons would be uncorrelated, the S/N would be correspondingly enhanced in the photodetector output. An additional advantage to be gained by use of a correlated-photon detector is that it could be capable of recovering the signal even in the presence of background light so bright that a classical uncorrelated-photon detector would be saturated. A blocked-impurity-band (BIB) photodetector that preferentially detects pairs of correlated photons over uncorrelated ones and that operates at a quantum efficiency of 88 percent is commercially available. This detector must be cooled to the temperature of liquid helium to obtain the desired low-noise performance. It is planned to use this detector in a proof-of-principle demonstration. In addition, it may be possible to develop GaN-based photodetectors that could offer the desired low-noise performance at room temperature.

•Oct 1, 2003•0 citations

Noise-resistant biologically correlated biphoton imaging based on a super-bunching light source

Xiangdong Li, LI Yuanyuan, Xinghui Liu +10 more

Correlation imaging based on entangled light sources offers potential benefits over classical single-photon imaging (SPI) in noisy environments, but also faces challenges such as low brightness, long integration times, and difficulty imaging biological organisms. Here, we propose noise-resistant biologically correlated biphoton imaging (CPI) based on a super-bunching light source, addressing the challenge of severe signal-to-noise ratio degradation in conventional SPI schemes. Our CPI, based on a super-bunching light source with high brightness, broadband spectrum (400–1100 nm), and strong quantum correlation (g 2 (0) ∼ 250), delivers high-performance, noise-resistant operation by extracting correlated photon pairs between the reference and signal paths. Experimental results show that under extreme noise conditions (noise-to-signal ratio up to 600), the structural profile in conventional SPI is entirely obscured by noise. In contrast, CPI still clearly resolves the target structure. Quantitative analysis further reveals that, as noise intensity increases, the imaging visibility of CPI can be enhanced by more than two orders of magnitude compared to SPI schemes. This study confirms the exceptional robustness and practical utility of super-bunching light-based correlated imaging in high-noise environments, offering an effective technical approach for high-quality biological observation in complex optical conditions.

Optics Express•Jun 2, 2026•0 citations

Noise-tolerant object detection and ranging using quantum correlations

Hashir Kuniyil, Helin Ozel, Hasan Yılmaz +1 more

Abstract Imaging, detection and ranging of objects in the presence of significant background noise is a fundamental challenge in optical sensing. Overcoming the limitations imposed in conventional methods, quantum light sources show higher resistance against noise in a time-correlation-based quantum illumination. Here, we introduce the advantage of using not only time correlations but also polarization correlations in photon pairs in the detection of an object that is embedded in a noisy background. In this direction, a time- and polarization-correlated photon pair source using the spontaneous parametric down-conversion process is exploited. We found that the joint measurement of correlated pairs allows distinguishing the signal from the noise photons and that leads to an improved signal-to-noise ratio. Our comparative study revealed that using polarization correlations in addition to time correlations provides improved noise rejection. Furthermore, we show that polarization correlation allows undoing the detector limitation where high background often leads to detector saturation.

arXiv:2111.04062•Journal of Optics•Aug 15, 2022•9 citations

Observation of Photon Bunching in Broadband Multimode Thermal Light Enabled by Temporal Imaging

Filip Sośnicki, Michał Mikołajczyk, Sanjay Kapoor +3 more

Photons emitted by incoherent sources exhibit temporal bunching, a fundamental manifestation of Bose-Einstein statistics first observed by Hanbury Brown and Twiss (HBT). While intensity correlation measurements originated in astronomy and are now central across quantum technologies, biophysics, and spectroscopy, observing temporal bunching in broadband thermal light remains limited by detector temporal resolution. Conventional approaches - such as streak cameras or optical upconversion - introduce severe trade-offs in efficiency, bandwidth, or setup versatility. Here, we propose and demonstrate a third route: pre-detection temporal magnification of the optical field prior to measuring its intensity autocorrelation function in a conventional HBT setup. Using an electro-optic time lens with a temporal magnification of 660, we resolve the temporal intensity autocorrelation of broadband thermal light generated via non-degenerate spontaneous parametric down-conversion with a bandwidth of 250 GHz. This enables direct observation of thermal photon bunching on sub-3.5 picosecond timescales without narrow spectral filtering, establishing pre-detection temporal imaging as a general platform for broadband statistical optics, with applications spanning ultrafast quantum optics, biophysical imaging, and potentially stellar intensity interferometry.

physics.opticsCross-listedarXiv:2610.17228•Oct 14, 2026•0 citations

Quantum imaging with a photon counting camera

Osian Wolley, Thomas Gregory, Sebastian M. J. Beer +2 more

Classical light sources emit a randomly-timed stream of individual photons, the spatial distribution of which can be detected with a camera to form an image. Quantum light sources, based on parametric down conversion, emit photons as correlated photon-pairs. The spatial correlations between the photons enables imaging systems where the preferential selection of photon-pairs allows for enhancements in the noise performance over what is possible using classical light sources. However, until now the technical challenge of measuring, and correlating both photons has led to system complexity. Here we show that a camera capable of resolving the number of individual photons in each pixel of the detector array can be used to record an image formed from these photon-pair events and hence achieve a greater contrast than possible using a classical light source. We achieve an enhancement in the ratio of two-photon events compared to one-photon events using spatially correlated SPDC light compared to uncorrelated illumination by a LED. These results indicate the potential advantages of using photon counting cameras in quantum imaging schemes and these advantages will further increase as the technology is developed. Operating in photon sparse regimes such systems have potential applications in low-light microscopy and covert imaging.

Scientific Reports•May 18, 2022•49 citations

Heralded single-pixel imaging with high loss-resistance and noise-robustness

Junghyun Kim, Taek Jeong, Su‐Yong Lee +6 more

Imaging with non-classically correlated photon-pairs takes advantages over classical limits in terms of sensitivity and a signal-to-noise ratio. However, it is still a challenge to achieve a strong resilience to background noise and losses for practical applications. In this work, we present heralded single-pixel imaging that is remarkably robust against bright background noise and severe signal losses. Using a strong temporal correlation between a photon-pair and joint measurement-based imaging method, we achieve the suppression of noise up to 1000 times larger than the signal and also demonstrate the correlation-induced SNR enhancement factor of over 200 against 70 times larger noise and a 90% signal loss compared to non-time-gated classical imaging. Our work enables correlated imaging with a highly scalable photon capacity.

arXiv:2112.01648•Applied Physics Letters•Dec 13, 2021•14 citations
Thermal light is characterized by the phenomenon of photon bunching, which manifests as a higher probability of detecting two photons within a short time interval compared to a purely random distribution. In this work, we propose an imaging system that exploits this temporal correlation by employing innovative SNSPD detectors, which – thanks to their features to be presented – allow only temporally correlated photon pairs to be selected, effectively suppressing uncorrelated background. The system, for which a patent has been filed, offers a superior signal-to-noise ratio compared to intensity-only imaging, particularly under low-light conditions. In the following, we will describe the optical layout of the system, the operating principle based on temporal correlation, the results of simulations of stray light suppression, and the potential applications in low signal-to-noise scenarios.
A proposed method of suppressing the effect of background noise in an optical communication system would exploit the transmission and reception of correlated photons at the receiver. The method would not afford any advantage in a system in which performance is limited by shot noise. However, if the performance of the system is limited by background noise (e.g., sunlight in the case of a free-space optical communication system or incoherently scattered in-band photons in the case of a fiber-optic communication system), then the proposed method could offer an advantage: the proposed method would make it possible to achieve a signal-to-noise ratio (S/N) significantly greater than that of an otherwise equivalent background- noise-limited optical communication system based on the classical transmission and reception of uncorrelated photons. The figure schematically depicts a classical optical-communication system and a system according to the proposed method. In the classical system, a modulated laser beam is transmitted along an optical path to a receiver, the optics of which include a narrow-band-pass filter that suppresses some of the background noise. A photodetector in the receiver detects the laser-beam and background photons, most or all of which are uncorrelated. In the proposed system, correlated photons would be generated at the transmitter by making a modulated laser beam pass through a nonlinear parametric down-conversion crystal. The sum of frequencies of the correlated photons in each pair would equal the frequency of the incident photon from which they were generated. As in the classical system, the correlated photons would travel along an optical path to a receiver, where they would be band-pass filtered and detected. Unlike in the classical system, the photodetector in the receiver in this system would be one that intrinsically favors the detection of pairs of correlated photons over the detection of uncorrelated photons. Even though there would be no way of knowing the precise location and time of creation of a given pair of correlated signal photons in the nonlinear down-conversion crystal, the fact that the photons are necessarily created at the same time and place makes it possible to utilize conventional geometrical imaging optics to reunite the photons in coincidence in the receiving photodetector. Because most or all of the signal photons would be correlated while most or all of the noise photons would be uncorrelated, the S/N would be correspondingly enhanced in the photodetector output. An additional advantage to be gained by use of a correlated-photon detector is that it could be capable of recovering the signal even in the presence of background light so bright that a classical uncorrelated-photon detector would be saturated. A blocked-impurity-band (BIB) photodetector that preferentially detects pairs of correlated photons over uncorrelated ones and that operates at a quantum efficiency of 88 percent is commercially available. This detector must be cooled to the temperature of liquid helium to obtain the desired low-noise performance. It is planned to use this detector in a proof-of-principle demonstration. In addition, it may be possible to develop GaN-based photodetectors that could offer the desired low-noise performance at room temperature.
Correlation imaging based on entangled light sources offers potential benefits over classical single-photon imaging (SPI) in noisy environments, but also faces challenges such as low brightness, long integration times, and difficulty imaging biological organisms. Here, we propose noise-resistant biologically correlated biphoton imaging (CPI) based on a super-bunching light source, addressing the challenge of severe signal-to-noise ratio degradation in conventional SPI schemes. Our CPI, based on a super-bunching light source with high brightness, broadband spectrum (400–1100 nm), and strong quantum correlation (g 2 (0) ∼ 250), delivers high-performance, noise-resistant operation by extracting correlated photon pairs between the reference and signal paths. Experimental results show that under extreme noise conditions (noise-to-signal ratio up to 600), the structural profile in conventional SPI is entirely obscured by noise. In contrast, CPI still clearly resolves the target structure. Quantitative analysis further reveals that, as noise intensity increases, the imaging visibility of CPI can be enhanced by more than two orders of magnitude compared to SPI schemes. This study confirms the exceptional robustness and practical utility of super-bunching light-based correlated imaging in high-noise environments, offering an effective technical approach for high-quality biological observation in complex optical conditions.
Abstract Imaging, detection and ranging of objects in the presence of significant background noise is a fundamental challenge in optical sensing. Overcoming the limitations imposed in conventional methods, quantum light sources show higher resistance against noise in a time-correlation-based quantum illumination. Here, we introduce the advantage of using not only time correlations but also polarization correlations in photon pairs in the detection of an object that is embedded in a noisy background. In this direction, a time- and polarization-correlated photon pair source using the spontaneous parametric down-conversion process is exploited. We found that the joint measurement of correlated pairs allows distinguishing the signal from the noise photons and that leads to an improved signal-to-noise ratio. Our comparative study revealed that using polarization correlations in addition to time correlations provides improved noise rejection. Furthermore, we show that polarization correlation allows undoing the detector limitation where high background often leads to detector saturation.
Photons emitted by incoherent sources exhibit temporal bunching, a fundamental manifestation of Bose-Einstein statistics first observed by Hanbury Brown and Twiss (HBT). While intensity correlation measurements originated in astronomy and are now central across quantum technologies, biophysics, and spectroscopy, observing temporal bunching in broadband thermal light remains limited by detector temporal resolution. Conventional approaches - such as streak cameras or optical upconversion - introduce severe trade-offs in efficiency, bandwidth, or setup versatility. Here, we propose and demonstrate a third route: pre-detection temporal magnification of the optical field prior to measuring its intensity autocorrelation function in a conventional HBT setup. Using an electro-optic time lens with a temporal magnification of 660, we resolve the temporal intensity autocorrelation of broadband thermal light generated via non-degenerate spontaneous parametric down-conversion with a bandwidth of 250 GHz. This enables direct observation of thermal photon bunching on sub-3.5 picosecond timescales without narrow spectral filtering, establishing pre-detection temporal imaging as a general platform for broadband statistical optics, with applications spanning ultrafast quantum optics, biophysical imaging, and potentially stellar intensity interferometry.
Classical light sources emit a randomly-timed stream of individual photons, the spatial distribution of which can be detected with a camera to form an image. Quantum light sources, based on parametric down conversion, emit photons as correlated photon-pairs. The spatial correlations between the photons enables imaging systems where the preferential selection of photon-pairs allows for enhancements in the noise performance over what is possible using classical light sources. However, until now the technical challenge of measuring, and correlating both photons has led to system complexity. Here we show that a camera capable of resolving the number of individual photons in each pixel of the detector array can be used to record an image formed from these photon-pair events and hence achieve a greater contrast than possible using a classical light source. We achieve an enhancement in the ratio of two-photon events compared to one-photon events using spatially correlated SPDC light compared to uncorrelated illumination by a LED. These results indicate the potential advantages of using photon counting cameras in quantum imaging schemes and these advantages will further increase as the technology is developed. Operating in photon sparse regimes such systems have potential applications in low-light microscopy and covert imaging.
Imaging with non-classically correlated photon-pairs takes advantages over classical limits in terms of sensitivity and a signal-to-noise ratio. However, it is still a challenge to achieve a strong resilience to background noise and losses for practical applications. In this work, we present heralded single-pixel imaging that is remarkably robust against bright background noise and severe signal losses. Using a strong temporal correlation between a photon-pair and joint measurement-based imaging method, we achieve the suppression of noise up to 1000 times larger than the signal and also demonstrate the correlation-induced SNR enhancement factor of over 200 against 70 times larger noise and a 90% signal loss compared to non-time-gated classical imaging. Our work enables correlated imaging with a highly scalable photon capacity.