The increasing demand for secure communication makes quantum key distribution (QKD) a compelling technology, as it exploits the fundamental principles of quantum physics to enhance secure data transmission. However, practical deployment faces limitations such as limited transmission distances and dedicated hardware-channel requirements. This paper proposes a linear programming-based model that jointly addresses routing, wavelength assignment, and trusted-node minimization in QKD networks with wavelength division multiplexing (WDM), considering that the secret key rate becomes impractical beyond a given transmission distance, thus requiring the relaying of secret keys through trusted repeaters. In particular, the study contrasts scenarios where traffic is concentrated along a single route with those where key rates are split and routed over multiple nonoverlapping paths (MNOPs) using two mechanisms: Concatenate Multipart (CM) and Bitwise Product Multipath (BPM). While the literature shows that MNOPs can improve security (BPM) and improve the secret key rate (CM), we demonstrate that these mechanisms come with additional deployment costs.
The increasing demand for secure communication makes quantum key distribution (QKD) a compelling technology, as it exploits the fundamental principles of quantum physics to enhance secure data transmission. However, practical deployment faces limitations such as limited transmission distances and dedicated hardware-channel requirements. This paper proposes a linear programming-based model that jointly addresses routing, wavelength assignment, and trusted-node minimization in QKD networks with wavelength division multiplexing (WDM), considering that the secret key rate becomes impractical beyond a given transmission distance, thus requiring the relaying of secret keys through trusted repeaters. In particular, the study contrasts scenarios where traffic is concentrated along a single route with those where key rates are split and routed over multiple nonoverlapping paths (MNOPs) using two mechanisms: Concatenate Multipart (CM) and Bitwise Product Multipath (BPM). While the literature shows that MNOPs can improve security (BPM) and improve the secret key rate (CM), we demonstrate that these mechanisms come with additional deployment costs.
Quantum key distribution (QKD) uses the laws of quantum mechanics to distribute secret keys with information-theoretic security. To realize QKD for secure communications among multiple distant users, fiber-based QKD networks can be deployed with today's available technologies. Incorporating QKD into existing wavelength-division multiplexing (WDM) network infrastructure provides a practical way to reduce the difficulty and cost of QKD networking. Nonetheless, the costs of QKD nodes and QKD links are still considered as the major barriers to long-distance QKD network deployment in practice. In this work, we study how to minimize the cost of deploying QKD-over-WDM backbone networks. We introduce a general architecture of QKD-over-WDM backbone networks. A novel cost-oriented model is defined to elaborate the cost-minimized problem, in which various QKD network components including QKD transceivers, QKD auxiliary equipment for QKD backbone nodes and trusted repeater nodes (TRNs), and QKD links are considered. The physical-layer parameters such as secret-key rate, physical distance, and the layout of TRNs are also incorporated in our defined model. We develop an integer linear programming (ILP) model and a novel cost-efficient QKD networking (CEQN) heuristic algorithm to address the cost-minimized problem. The extensive simulations indicate that our proposed approaches are effective in reducing the cost of deploying QKD-over-WDM backbone networks, where the designed CEQN algorithm is efficient to demonstrate similar to the ILP model. Finally, some open issues in future work are discussed, given that this work only presents an early highlevel analysis as opposed to a definitive detailed model.
Quantum Key Distribution (QKD) is a recent technology for secure distribution of symmetric keys, which is currently being deployed to increase communications security against quantum attacks. However, the key rate achievable over a weak quantum signal is limited by the link performance (e.g., loss and noise) and propagation distance, especially in multi-node QKD networks, making it necessary to design a scheme to efficiently and timely distribute keys to the various nodes. In this work, we formulate, using a Mixed Integer Linear Programming (MILP) model, a novel Routing, Channel, and Key-rate Assignment (RCKA) problem for QKD with Quantum Key Pool (QKP), which exploits the opportunity of using trusted relays and optical bypass. Our formulation accounts for the possibility to build a quantum key distribution path that combines both quantum channels and trusted relays to increase the acceptance ratio of key rate requests. Leveraging different versions of the proposed MILP model, we evaluate several strategies exploiting different combinations of trusted relays and optical bypass for the RCKA problem. Results show how different trade-offs between security and resource-efficiency (expressed in terms of acceptance ratio of key rate requests vs. key storing rate in QKP) can be achieved when adopting trusted-relay and/or optical-bypass technologies. Trusted relays can provide a higher acceptance ratio when the number of QKD modules (transmitters or receivers) is sufficiently large, while optical bypass, which does not require the implementation of expensive trusted relays, is preferable when the number of QKD modules is a limiting factor.
There is a need to ensure unconditionally secure communications between different sites of an organization. We use quantum key distribution (QKD) protocol to provide a continuous stream of secret key bits to each communicating pair for message encryption through one-time-pad (OTP) cryptography. Due to long distance between different sites, trusted nodes are used to relay each service key in a hop-by-hop manner from one end node to another end node of a communicating pair. In a QKD network, routes for key relaying can be affected by availability of relay key bits at trusted nodes. Also, relay key allocation among different routes can impact security. We consider the scenario of supporting multiple communicating pairs, where each pair demands delivery of a certain service key rate across the QKD network, and trusted nodes may not have sufficient relay key rates to perform bitwise encryption to protect the service key. Hence, there is a need to allocate the limited relay key bits to meet all service key delivery demands while considering its effects on security. We propose to perform jointly routing and relay key allocation to minimize attack success probability. We have formulated the joint problem as an optimization and further proposed an efficient algorithm to find the optimal solutions. We have evaluated the proposed algorithm to confirm its ability and efficiency in finding optimal routes and relay key allocations. For the specific network topology that we have adopted, results show that the minimum number of required trusted nodes increases linearly when end nodes are added to the system. Furthermore, we can achieve a higher security level by adding more trusted nodes in a QKD network. But increasing the number of trusted nodes beyond the minimum requirement may not continue to reduce significantly the attack success probability.
Quantum key distribution (QKD) networks offer scalable secure communication, while efficient integration with existing optical infrastructure requires careful consideration. This paper investigates enhancing the security of multipath QKD over multi-band systems by exploring the trade-offs between multi-band separation and multipath techniques. A novel, to our knowledge, framework, incorporating blocking ratio analysis for a single and multipath QKD, is proposed, comparing bitwise product and concatenated key generation methods. Our model considers propagation delays and key pool synchronization’s impact on the secret key rate (SKR). Our simulations using a U.S. long-haul network model demonstrate significant benefits of implementing QKD in alternative spectral bands. The results show substantial improvements in SKR at various span lengths in single-path scenarios. Additionally, increasing the number of quantum channels led to noticeable reductions in network blocking rates, enabling higher classical traffic loads throughout the network infrastructure. We introduce, to our knowledge, new KPIs: the blocking rate ( B CQ ) and a comprehensive security rate ( C ), assessing the final key’s overall secrecy. For multipath schemes, simulations reveal that concatenated multipath QKD, while exhibiting a superior blocking rate, showed 12% less compromised secrecy at 4000 km (32% to 20%), compared to less than 10% for bitwise product multipath QKD under the same conditions. These findings provide valuable insights into designing efficient and secure quantum-enhanced optical networks, highlighting the complex interplay between security and efficiency in multipath QKD architectures.
Quantum Key Distribution (QKD) enables information-theoretic secure key exchange, but the deployment of large-scale QKD networks introduces new challenges related to routing, resource allocation, and security exposure in trusted-node-based architectures. In multipath QKD networks, the secret key rate can be partitioned and transmitted over multiple link-disjoint paths, so that an adversary must simultaneously compromise all paths to reconstruct the complete secret key. However, traffic is often equally distributed across the available disjoint paths, although such uniform partitioning may be suboptimal when candidate paths exhibit heterogeneous vulnerability levels. This paper proposes a security-aware optimization framework for QKD-enabled optical networks that determines a non-uniform multipath traffic partitioning strategy aimed at minimizing the expected amount of eavesdropped traffic. The proposed approach is formulated as a Mixed-Integer Linear Programming (MILP) model that integrates probabilistic secrecy metrics derived from trusted node compromise probabilities, a traffic vulnerability threshold that limits partial information exposure, and adaptive bandwidth squeezing protection to ensure service continuity under failure scenarios. The model jointly optimizes traffic allocation and excess key capacity, allowing the protection overhead to be dynamically determined according to security and resilience requirements. Numerical evaluations conducted on both a toy topology and the Pan-European network demonstrate that the proposed exposure-aware partitioning strategy significantly reduces the expected eavesdropped traffic compared to conventional equal-splitting approaches while maintaining resilience guarantees. These results highlight the potential of security-driven traffic engineering for the design of resilient and efficient multipath QKD networks.
Background: Quantum Key Distribution (QKD( is a promising technology for secure communication, leveraging the principles of quantum mechanics to provide theoretically unbreakable encryption. With the exponential growth in data traffic and the increasing need for secure communication in backbone fiber networks, integrating high-bit-rate multiplexing techniques into QKD systems can enhance their efficiency and scalability. Problem: Traditional QKD systems face limitations in terms of data rate and network scalability, particularly in high-capacity optical communication networks. As data demands increase, there is a critical need for methods that can support high-bit-rate multiplexing while maintaining the security and performance of QKD. Method: This study proposes a novel QKD approach using high-bit-rate multiplexing in backbone fiber networks. The method involves encoding quantum keys using multiple optical channels simultaneously to increase the data throughput of the QKD system. We employ a combination of time-division multiplexing (TDM( and wavelength-division multiplexing (WDM( to optimize the use of fiber resources and enhance key distribution rates. Results: Simulation results demonstrate that the proposed method achieves a key distribution rate of 10 Mbps over a 200 km fiber link with a quantum bit error rate (QBER( of 1.5%. This represents a 50% improvement in key rate compared to conventional QKD systems without multiplexing. Additionally, the method shows enhanced scalability and network utilization, supporting up to 16 multiplexed channels with minimal impact on security.