Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

International Electronics Symposium (IES)

Enhancing Key Generation Rate in LoRa-Based V2I Secret Key Generation Using Segment-Based Privacy Amplification

Muhammad Nizamudin Mahfud, Mike Yuliana, Weny Mistarika Rahmawati, Reni Soelistijorini, Nailul Muna

Published Aug 1, 2026• 0 citations
Publisher

Abstract

Physical layer secret key generation (SKG) provides a promising solution for securing vehicle-toinfrastructure (V2I) communications by exploiting the inherent reciprocity of wireless channels. However, received signal strength indicator (RSSI) fluctuations, quantization mismatches, and constrained key generation rates present significant challenges in highly dynamic LoRa-based environments. This paper proposes an SKG framework that integrates Kalman filter, Guard Band Multibit Quantization (GBMQ), Cascade reconciliation, and SHA-1 based privacy amplification. Experimental evaluations were conducted across multiple urban V2I operational scenarios. The results demonstrate that the Kalman filter effectively enhances RSSI correlation, while the GBMQ scheme substantially minimizes the key disagreement rate (KDR) compared to the conventional Adaptive Multibit Quantization method. Furthermore, the remaining bit mismatches are completely eliminated via Cascade reconciliation, achieving a 0% KDR in all evaluated environments. Finally, the privacy amplification stage successfully generates secure cryptographic keys that exhibit robust randomness properties, confirming the efficacy of the proposed framework for resilient physical layer security in V2I networks.

DOI
10.1109/ies71033.2026.11702640

Related papers

Implementation of V2V Communication Security on LoRa-Based Physical Layer Key Generation

Ezekiel Furqon Patongai, Mike Yuliana, Amang Sudarsono

With the rise of connected vehicular networks, Vehicle-to-Vehicle (V2V) communication has become a fundamental enabler for intelligent transportation systems. However, the open nature of wireless channels introduces risks such as eavesdropping and key compromise. To address these issues, we propose a secure V2V communication scheme based on Physical Layer Key Generation (PLKG) using LoRa technology. The proposed system utilizes Received Signal Strength Indicator (RSSI) measurements between two moving vehicles as the entropy source. To improve the channel correlation, a Savitzky-Golay filter is applied as a preprocessing step. Adaptive multibit quantization is then used to convert the RSSI into binary sequences, followed by the Cascade algorithm for error reconciliation. To enhance randomness, privacy amplification is applied using universal hashing and SHA-1. Finally, the generated key is used for AES-128 encryption. The system is implemented on Raspberry Pi 4B using AcSiP EK-S76SXB and RAK2245 LoRa modules. Experimental validation was conducted in three movement scenarios firstly both vehicle move from opposite-direction at$\mathbf{1 0 ~ k m} / \mathbf{h}$for$\mathbf{3 0 0}$meters, secondly both vehicle move at the same-direction at$\mathbf{1 0 ~ k m} / \mathbf{h}$for$\mathbf{8 0 0}$meters, and lastly same as the second scenario but with different speed at$20 ~\text{km} / \mathrm{h}$. Results shown that the system achieves a reliable key generation rate (KGR) of up to 176075.73 bit/s while maintaining low computation time, demonstrating its feasibility for secure real-time V2V communication.

International Electronics Symposium (IES)•Aug 5, 2025•0 citations

A Reconciliation-Efficient Secret Key Generation Scheme for Outdoor RSSI-Based Wireless Links

Naufal Fattah Rizqi, Mike Yuliana, Tita Karlita

This paper proposes a reconciliation-efficient Received Signal Strength Indicator (RSSI)-based Secret Key Generation (SKG) scheme for outdoor wireless communication. The proposed method integrates Variance-Aware Hybrid Preprocessing (VAHP), Gray Code quantization, reliability-aware bit selection, 128-bit key block verification, universal hash-based privacy amplification, and SHA-256-based 128-bit key extraction. Unlike conventional SKG schemes that rely on full multi-pass information reconciliation, the proposed approach accepts only identical 128-bit candidate blocks and rejects mismatched blocks, thereby reducing dependency on full reconciliation. Experimental results across three outdoor scenarios show that VAHP consistently improves RSSI reciprocity, increasing the Pearson correlation from 0.4207 to 0.7989 in Scenario 1, from 0.8243 to 0.9520 in Scenario 2, and from 0.7514 to 0.8680 in Scenario 3. Reliability-aware bit selection reduces the Bit Disagreement Rate (BDR) in all scenarios, while key block verification achieves a final Key Disagreement Rate (KDR) of $0.00 \%$ for all accepted key blocks. The final extracted keys achieve a 100% AES-128 encryption/decryption success rate and an overall pass rate of 97.80% across selected NIST-based randomness tests. These results indicate that the proposed scheme can generate identical and usable AES-128 keys while reducing reconciliation overhead, at the cost of rejecting unreliable key blocks and reducing the effective Key Generation Rate (KGR).

International Electronics Symposium (IES)•Aug 1, 2026•0 citations

Implementation of Secret Key Generation Scheme in LoRa-Based Smart Agriculture

Nayla Ainun Nisa, Mike Yuliana, Norma Ningsih

The increasing adoption of Internet of Things technology in agricultural environments requires secure and efficient wireless communication systems. This paper analyzes the performance of Secret Key Generation (SKG) based on Received Signal Strength Indicator (RSSI) using two Antares LR ESP-201 nodes communicating through LoRa in an outdoor agricultural environment in the presence of a passive eavesdropper. The proposed method combines preprocessing using Savitzky–Golay Filter, 2-ary quantization, reconciliation using Reed–Solomon Code, and privacy amplification using Universal Hash and SHA-1. Experiments were conducted under three movement scenarios with different node movement directions to evaluate key generation performance. Results show that the preprocessing stage significantly improves RSSI correlation, achieving a correlation coefficient of up to 0.991. The proposed system achieves a Key Generation Rate (KGR) of up to 4.20 bit/s and successfully reduces the Key Disagreement Rate (KDR) to 0% after reconciliation. In addition, the universal hash function increases entropy, resulting in a 128-bit cryptographic key. The generated 128-bit secret key is subsequently used as the symmetric encryption key for AES-128 to secure data transmission between IoT nodes. These results demonstrate that the proposed method can generate reliable and secure secret keys for LoRa-based Internet of Things applications in smart agriculture.

International Electronics Symposium (IES)•Aug 1, 2026•0 citations

Performance Analysis of Secret Key Generation on Portable Device for Peer-to-Peer Communication

Aulia Pramesti, Mike Yuliana, Haryadi Amran Darwito

Secure wireless communication is an important requirement for portable devices operating in outdoor environments, where transmitted data can be easily intercepted by unauthorized nodes. This paper presents a performance analysis of Secret Key Generation (SKG) on portable devices for peer-to-peer communication. The proposed system generates a shared secret key from Received Signal Strength Indicator (RSSI) measurements without transmitting the key through the network. The SKG process consists of channel probing, Kalman Filter preprocessing, multibit quantization, BCH reconciliation, and privacy amplification using Universal Hash and SHA-1. The generated key is then used for AES-128 encryption for secure data transmission between legitimate devices. The performance evaluation is based on the best Kalman Filter configuration parameter $\mathbf{Q}\lt \mathbf{R}$ and $\mathbf{Q}\gt \mathbf{R}$ using the block data variations 1, 2, 4 and 10. The experimental results show that the $\mathbf{Q}\lt \mathbf{R}$ with 10 block configuration has the highest RSSI correlation between Alice and Bob, which is $0.9129,0.9546$, and 0.9238 in three test scenarios. The multibit quantization stage provides a stable Key Generation Rate (KGR) of up to 25.22 bit/s, while the BCH reconciliation successfully reduces the Key Disagreement Rate (KDR) between Alice and Bob to 0% in all cases. Eve, on the other hand, has a high KDR and does not get the same key as the legitimate devices. The results demonstrate that the presented SKG mechanism is capable of generating synchronized, random and secure keys for portable peer-to-peer communication.

International Electronics Symposium (IES)•Aug 1, 2026•0 citations

LoRa-LiSK: A Lightweight Shared Secret Key Generation Scheme for LoRa Networks

Aisha Kanwal Junejo, Fatma Benkhelifa, Boon Wong +1 more

Physical-layer security (PLS) schemes use the randomness of the channel parameters, namely, channel state information (CSI) and received signal strength indicator (RSSI) to generate the secret keys. There has been limited work in PLS schemes in long-range (LoRa) wide-area networks (LoRaWANs) which hinder their widespread application. Limitations observed in existing studies include the requirement of high correlation between channel parameter measurements for secret key generation in the proposed schemes and the evaluation of the schemes has only been done in either fully indoor or outdoor environments. The real-world wireless sensor networks (WSNs) and LoRa use cases might not meet both requirements thus making the current PLS schemes inappropriate for these systems. By considering the limitations found in existing PLS schemes, this article proposes LoRA-LiSK, a practical and efficient shared secret key generation scheme for LoRa networks. Our proposed LoRa-LiSK scheme consists of several preprocessing techniques (timestamp matching, two sample Kolmogorov–Smirnov tests, and a Savitzky–Golay filter), multilevel quantization, information reconciliation using Bose–Chaudhuri–Hocquenghem (BCH) codes, and finally, privacy amplification using secure hash algorithm SHA-2. The LoRa-LiSK scheme is extensively evaluated on real WSN/IoT devices in practical application scenarios: 1) indoor to outdoor and 2) LoRa static and mobile outdoor links. It outperforms existing schemes by generating keys with channel parameter measurements of low correlation values (0.2–0.6), while still essentially achieving high key generation rates, and low key disagreement rates (10%–20%). The scheme updates a key in approximately 1 h using an application profile with high transmission rate compared to 3 h reported by existing works while still respecting the duty cycle regulation. It also incurs less communication overhead compared to the existing works.

IEEE Internet of Things Journal•Aug 6, 2021•57 citations

Implementation of Modified Multibit (MMB) in a Secret Key Generation Scheme for Relay-Based LoRa Networks in Indoor Environments

Sirril Fairuz Qolbi, Faridatun Nadziroh, Anang Budikarso +3 more

Data security on Long Range (LoRa) wireless networks is vulnerable to eavesdropping threats, necessitating a Physical Layer Security (PLS) approach based on Secret Key Generation (SKG). This study implements an SKG scheme utilizing Received Signal Strength Indicator (RSSI) values extracted in an indoor environment. The key generation process includes signal filtering using Discrete Cosine Transform (DCT) to extract slow fading profiles, 2-bit Modified Multibit (MMB) quantization, and Bose-Chaudhuri-Hocquenghem (BCH) information reconciliation. Based on the evaluation of an indoor test scenario (Lab 04.14) with 560 aligned data samples, the BCH mechanism functionally overcame channel noise, reducing the raw Bit Error Rate (BER) to 0.0000 and generating perfectly identical secret key bits between legitimate nodes. Furthermore, spatial vulnerability evaluations demonstrated the system’s effectiveness against passive eavesdropping. Although the eavesdropper (Eve) was placed in close physical proximity to the Relay node (2.5 meters), the signal correlation at Eve remained very low post-DCT filtering correlation coefficient ranging from 0.115 to 0.146. This proves a successful spatial decorrelation, wherein the eavesdropper’s multipath fading profile was entirely random and unrepresentative of the legitimate channel. Consequently, unauthorized parties completely failed to duplicate the secret keys, proving the system’s robust reliability and security for relay-based LoRa networks in indoor environments.

International Electronics Symposium (IES)•Aug 1, 2026•0 citations
Physical layer secret key generation (SKG) provides a promising solution for securing vehicle-toinfrastructure (V2I) communications by exploiting the inherent reciprocity of wireless channels. However, received signal strength indicator (RSSI) fluctuations, quantization mismatches, and constrained key generation rates present significant challenges in highly dynamic LoRa-based environments. This paper proposes an SKG framework that integrates Kalman filter, Guard Band Multibit Quantization (GBMQ), Cascade reconciliation, and SHA-1 based privacy amplification. Experimental evaluations were conducted across multiple urban V2I operational scenarios. The results demonstrate that the Kalman filter effectively enhances RSSI correlation, while the GBMQ scheme substantially minimizes the key disagreement rate (KDR) compared to the conventional Adaptive Multibit Quantization method. Furthermore, the remaining bit mismatches are completely eliminated via Cascade reconciliation, achieving a 0% KDR in all evaluated environments. Finally, the privacy amplification stage successfully generates secure cryptographic keys that exhibit robust randomness properties, confirming the efficacy of the proposed framework for resilient physical layer security in V2I networks.
With the rise of connected vehicular networks, Vehicle-to-Vehicle (V2V) communication has become a fundamental enabler for intelligent transportation systems. However, the open nature of wireless channels introduces risks such as eavesdropping and key compromise. To address these issues, we propose a secure V2V communication scheme based on Physical Layer Key Generation (PLKG) using LoRa technology. The proposed system utilizes Received Signal Strength Indicator (RSSI) measurements between two moving vehicles as the entropy source. To improve the channel correlation, a Savitzky-Golay filter is applied as a preprocessing step. Adaptive multibit quantization is then used to convert the RSSI into binary sequences, followed by the Cascade algorithm for error reconciliation. To enhance randomness, privacy amplification is applied using universal hashing and SHA-1. Finally, the generated key is used for AES-128 encryption. The system is implemented on Raspberry Pi 4B using AcSiP EK-S76SXB and RAK2245 LoRa modules. Experimental validation was conducted in three movement scenarios firstly both vehicle move from opposite-direction at10 km/h\mathbf{1 0 ~ k m} / \mathbf{h}10 km/hfor300\mathbf{3 0 0}300meters, secondly both vehicle move at the same-direction at10 km/h\mathbf{1 0 ~ k m} / \mathbf{h}10 km/hfor800\mathbf{8 0 0}800meters, and lastly same as the second scenario but with different speed at20 km/h20 ~\text{km} / \mathrm{h}20 km/h. Results shown that the system achieves a reliable key generation rate (KGR) of up to 176075.73 bit/s while maintaining low computation time, demonstrating its feasibility for secure real-time V2V communication.
This paper proposes a reconciliation-efficient Received Signal Strength Indicator (RSSI)-based Secret Key Generation (SKG) scheme for outdoor wireless communication. The proposed method integrates Variance-Aware Hybrid Preprocessing (VAHP), Gray Code quantization, reliability-aware bit selection, 128-bit key block verification, universal hash-based privacy amplification, and SHA-256-based 128-bit key extraction. Unlike conventional SKG schemes that rely on full multi-pass information reconciliation, the proposed approach accepts only identical 128-bit candidate blocks and rejects mismatched blocks, thereby reducing dependency on full reconciliation. Experimental results across three outdoor scenarios show that VAHP consistently improves RSSI reciprocity, increasing the Pearson correlation from 0.4207 to 0.7989 in Scenario 1, from 0.8243 to 0.9520 in Scenario 2, and from 0.7514 to 0.8680 in Scenario 3. Reliability-aware bit selection reduces the Bit Disagreement Rate (BDR) in all scenarios, while key block verification achieves a final Key Disagreement Rate (KDR) of 0.00%0.00 \%0.00% for all accepted key blocks. The final extracted keys achieve a 100% AES-128 encryption/decryption success rate and an overall pass rate of 97.80% across selected NIST-based randomness tests. These results indicate that the proposed scheme can generate identical and usable AES-128 keys while reducing reconciliation overhead, at the cost of rejecting unreliable key blocks and reducing the effective Key Generation Rate (KGR).
The increasing adoption of Internet of Things technology in agricultural environments requires secure and efficient wireless communication systems. This paper analyzes the performance of Secret Key Generation (SKG) based on Received Signal Strength Indicator (RSSI) using two Antares LR ESP-201 nodes communicating through LoRa in an outdoor agricultural environment in the presence of a passive eavesdropper. The proposed method combines preprocessing using Savitzky–Golay Filter, 2-ary quantization, reconciliation using Reed–Solomon Code, and privacy amplification using Universal Hash and SHA-1. Experiments were conducted under three movement scenarios with different node movement directions to evaluate key generation performance. Results show that the preprocessing stage significantly improves RSSI correlation, achieving a correlation coefficient of up to 0.991. The proposed system achieves a Key Generation Rate (KGR) of up to 4.20 bit/s and successfully reduces the Key Disagreement Rate (KDR) to 0% after reconciliation. In addition, the universal hash function increases entropy, resulting in a 128-bit cryptographic key. The generated 128-bit secret key is subsequently used as the symmetric encryption key for AES-128 to secure data transmission between IoT nodes. These results demonstrate that the proposed method can generate reliable and secure secret keys for LoRa-based Internet of Things applications in smart agriculture.
Secure wireless communication is an important requirement for portable devices operating in outdoor environments, where transmitted data can be easily intercepted by unauthorized nodes. This paper presents a performance analysis of Secret Key Generation (SKG) on portable devices for peer-to-peer communication. The proposed system generates a shared secret key from Received Signal Strength Indicator (RSSI) measurements without transmitting the key through the network. The SKG process consists of channel probing, Kalman Filter preprocessing, multibit quantization, BCH reconciliation, and privacy amplification using Universal Hash and SHA-1. The generated key is then used for AES-128 encryption for secure data transmission between legitimate devices. The performance evaluation is based on the best Kalman Filter configuration parameter Q<R\mathbf{Q}\lt \mathbf{R}Q<R and Q>R\mathbf{Q}\gt \mathbf{R}Q>R using the block data variations 1, 2, 4 and 10. The experimental results show that the Q<R\mathbf{Q}\lt \mathbf{R}Q<R with 10 block configuration has the highest RSSI correlation between Alice and Bob, which is 0.9129,0.95460.9129,0.95460.9129,0.9546, and 0.9238 in three test scenarios. The multibit quantization stage provides a stable Key Generation Rate (KGR) of up to 25.22 bit/s, while the BCH reconciliation successfully reduces the Key Disagreement Rate (KDR) between Alice and Bob to 0% in all cases. Eve, on the other hand, has a high KDR and does not get the same key as the legitimate devices. The results demonstrate that the presented SKG mechanism is capable of generating synchronized, random and secure keys for portable peer-to-peer communication.
Physical-layer security (PLS) schemes use the randomness of the channel parameters, namely, channel state information (CSI) and received signal strength indicator (RSSI) to generate the secret keys. There has been limited work in PLS schemes in long-range (LoRa) wide-area networks (LoRaWANs) which hinder their widespread application. Limitations observed in existing studies include the requirement of high correlation between channel parameter measurements for secret key generation in the proposed schemes and the evaluation of the schemes has only been done in either fully indoor or outdoor environments. The real-world wireless sensor networks (WSNs) and LoRa use cases might not meet both requirements thus making the current PLS schemes inappropriate for these systems. By considering the limitations found in existing PLS schemes, this article proposes LoRA-LiSK, a practical and efficient shared secret key generation scheme for LoRa networks. Our proposed LoRa-LiSK scheme consists of several preprocessing techniques (timestamp matching, two sample Kolmogorov–Smirnov tests, and a Savitzky–Golay filter), multilevel quantization, information reconciliation using Bose–Chaudhuri–Hocquenghem (BCH) codes, and finally, privacy amplification using secure hash algorithm SHA-2. The LoRa-LiSK scheme is extensively evaluated on real WSN/IoT devices in practical application scenarios: 1) indoor to outdoor and 2) LoRa static and mobile outdoor links. It outperforms existing schemes by generating keys with channel parameter measurements of low correlation values (0.2–0.6), while still essentially achieving high key generation rates, and low key disagreement rates (10%–20%). The scheme updates a key in approximately 1 h using an application profile with high transmission rate compared to 3 h reported by existing works while still respecting the duty cycle regulation. It also incurs less communication overhead compared to the existing works.
Data security on Long Range (LoRa) wireless networks is vulnerable to eavesdropping threats, necessitating a Physical Layer Security (PLS) approach based on Secret Key Generation (SKG). This study implements an SKG scheme utilizing Received Signal Strength Indicator (RSSI) values extracted in an indoor environment. The key generation process includes signal filtering using Discrete Cosine Transform (DCT) to extract slow fading profiles, 2-bit Modified Multibit (MMB) quantization, and Bose-Chaudhuri-Hocquenghem (BCH) information reconciliation. Based on the evaluation of an indoor test scenario (Lab 04.14) with 560 aligned data samples, the BCH mechanism functionally overcame channel noise, reducing the raw Bit Error Rate (BER) to 0.0000 and generating perfectly identical secret key bits between legitimate nodes. Furthermore, spatial vulnerability evaluations demonstrated the system’s effectiveness against passive eavesdropping. Although the eavesdropper (Eve) was placed in close physical proximity to the Relay node (2.5 meters), the signal correlation at Eve remained very low post-DCT filtering correlation coefficient ranging from 0.115 to 0.146. This proves a successful spatial decorrelation, wherein the eavesdropper’s multipath fading profile was entirely random and unrepresentative of the legitimate channel. Consequently, unauthorized parties completely failed to duplicate the secret keys, proving the system’s robust reliability and security for relay-based LoRa networks in indoor environments.