The design of efficient quantum error-correcting codes that address qubit erasures is relevant, as these erasures occur in physical systems such as photonic, trapped-ion, and superconducting qubit systems. The focus here is on the performance of the Quantum Hypergraph Product (HGP) code when decoded with a low-complexity peeling decoder. As with classical LDPC codes, the performance of the peeling decoder is limited by the presence of stopping sets, so minimizing their number is important. The parity-check matrix of the HGP code is parameterized by the parity-check matrix H of a classical error-correcting code. Geometrically, the stopping sets of the HGP code can be classified as vertical, horizontal, or mixed, with the mixed type including stabilizer stopping sets. We derive tight upper and lower bounds on the probability of stabilizer stopping sets that are linked to the stabilizer generators, and establish a simple relationship with the variable and check node distributions in the Tanner graph associated with H. Additionally, we show how an earlier bound by Shokrollahi implies an upper bound on the probability of both horizontal and vertical stopping sets. Taken together, the bounds presented offer useful insights for selecting H to enhance peeling performance, and we present an illustrative example of such an application.
The design of efficient quantum error-correcting codes that address qubit erasures is relevant, as these erasures occur in physical systems such as photonic, trapped-ion, and superconducting qubit systems. The focus here is on the performance of the Quantum Hypergraph Product (HGP) code when decoded with a low-complexity peeling decoder. As with classical LDPC codes, the performance of the peeling decoder is limited by the presence of stopping sets, so minimizing their number is important. The parity-check matrix of the HGP code is parameterized by the parity-check matrix H of a classical error-correcting code. Geometrically, the stopping sets of the HGP code can be classified as vertical, horizontal, or mixed, with the mixed type including stabilizer stopping sets. We derive tight upper and lower bounds on the probability of stabilizer stopping sets that are linked to the stabilizer generators, and establish a simple relationship with the variable and check node distributions in the Tanner graph associated with H. Additionally, we show how an earlier bound by Shokrollahi implies an upper bound on the probability of both horizontal and vertical stopping sets. Taken together, the bounds presented offer useful insights for selecting H to enhance peeling performance, and we present an illustrative example of such an application.
The problem of recovering from qubit erasures has recently gained attention as erasures occur in many physical systems such as photonic systems, trapped ions, superconducting qubits and circuit quantum electrodynamics. While several linear-time decoders for error correction are known, their errorcorrecting capability is limited to half the minimum distance of the code, whereas erasure correction allows one to go beyond this limit. As in the classical case, stopping sets pose a major challenge in designing efficient erasure decoders for quantum LDPC codes. In this paper, we show through simulation, that an attractive alternative here, is the use of quantum expander codes in conjunction with the peeling decoder that has linear complexity. We also discuss additional techniques including small-set-flip decoding, that can be applied following the peeling operation, to improve decoding performance and their associated complexity.
Quantum low-density parity-check (QLDPC) codes with asymptotically non-zero rates are prominent candidates for achieving fault-tolerant quantum computation, primarily due to the low operational depth of their syndrome-measurement circuits. Numerous studies advocate the necessity of fast decoders to fully harness the capabilities of QLDPC codes, thus driving the focus towards designing low-complexity iterative decoders. However, empirical investigations indicate that such iterative decoders are susceptible to having a high error floor when decoding QLDPC codes. The main objective of this paper is to analyze the decoding failures of thehypergraph-product(HGP) andlifted-product(LP) codes and to design decoders that mitigate these failures, thus achieving a reduced error floor. The suboptimal performance of these codes can predominantly be ascribed to two structural phenomena: (1) stabilizer-induced trapping sets (TS), which correspond to stabilizer-induced subgraphs in the Tanner graphs, and (2) classical trapping sets (TS), which originate from the classical codes used in the construction of HGP and LP codes. The dynamics of stabilizer-induced TSs are examined, and a straightforward modification of iterative decoders is proposed to circumvent these TSs. Moreover, this work proposes a systematic methodology for designing decoders that can circumvent the classical TSs in both HGP and LP codes by deriving them from decoders capable of avoiding the TSs in the parent classical LDPC codes. When decoders that can avoid stabilizer-induced TSs are run in parallel with those that can mitigate the effect of classical TSs, the logical error rate improves significantly in the error-floor region.
We design low-complexity, fault-tolerant decoders for quantum low-density parity-check (QLDPC) codes with the goal of reducing decoding latency. We target two major bottlenecks of decoding under the \emph{circuit-level} noise model: (i) post-processing via order-statistics decoding (OSD), and (ii) the large number of auxiliary variable nodes commonly introduced to represent CNOT-induced correlations during syndrome extraction. Our key observation is that propagating CNOT faults (\emph{hook errors}) create \emph{stabilizer-induced} trapping sets (TSs) that are intrinsic to hypergraph-product (HGP) and lifted-product (LP) constructions. Therefore, instead of modeling each such fault with an explicit correlation node and relying on OSD to clean up the resulting failures, we design message-passing decoders that resolve the corresponding \emph{stabilizer-induced} TSs directly. We obtain these decoders by deriving QLDPC decoders from decoders for the parent classical LDPC codes and using them collectively to correct broad families of \emph{stabilizer-induced} TSs. For CNOT faults that manifest primarily as syndrome errors, we show that their effect is equivalent to a data error together with syndrome-bit measurement errors. Consequently, given repeated measurements and a decoding graph that already includes nodes representing syndrome-bit errors, no distinct variable node is needed for each CNOT fault. Using a \emph{phenomenological} Tanner graph with nodes representing only data errors and syndrome-bit errors, simulations on LP codes show a significant improvement in logical error rate relative to BP+OSD. Moreover, the improved error correction relies on low-complexity finite-state iterative decoders, targeted for fast and low-latency FPGA implementation.
Quantum low-density parity-check (QLDPC) codes are an important class of quantum error-correcting codes that have low-weight stabilizer generators and typically offer encoding rates much higher than popular topological quantum codes such as surface and toric codes. While recent constructions of QLDPC codes have been aimed at two-level quantum systems, several hardware platforms for quantum computing, including superconducting and photonic systems, support a much larger Hilbert space. This makes the design of qudit-based quantum LDPC codes an issue of paramount significance in harnessing the increased flexibility afforded by high -dimensional quantum systems. In this paper, we forge the first steps in addressing this gap and explore the generalization of QLDPC constructions to qudit systems. We review two methods of generalizing binary quantum codes to qudit codes, namely, the stack and merge constructions, and investigate the application of these two meth-ods to the well-known hypergraph product and lifted-product codes. Subsequently, we provide upper and lower bounds for the encoding rates of the resulting qudit codes. We also prove an interesting relationship between the qudit hypergraph product and qudit lifted-product codes: the merge construction applied to the lifted product code is equivalent to the stack construction applied to the hypergraph product code under certain conditions. We evaluate the performance of these qudit codes under non-binary belief-propagation decoding and observe that qudit codes offer us a greater degree of flexibility in optimizing their rate-performance trade-off. We also demonstrate that, under certain conditions, qudit codes can simultaneously achieve higher rates and higher frame error rate (FER) performance than their binary counterparts.
For a quantum error correcting code to be used in practice, it needs to be equipped with an efficient decoding algorithm, which identifies corrections given the observed syndrome of errors.Hypergraph product codes are a promising family of constant-rate quantum LDPC codes that have a linear-time decoding algorithm called Small-Set-Flip (SSF) (Leverrier, Tillich, Zémor FOCS 2015). The algorithm proceeds by iteratively applying small corrections which reduce the syndrome weight. Together, these small corrections can provably correct large errors for sufficiently large codes with sufficiently large (but constant) stabilizer weight. However, this guarantee does not hold for small codes with low stabilizer weight. In this case, SSF can terminate with stopping failures, meaning it encounters an error for which it is unable to identify a small correction. We find that the structure of errors that cause stopping failures have a simple form for sufficiently small qubit failure rates. We propose a new decoding algorithm called the Projection-Along-a-Line (PAL) decoder to supplement SSF after stopping failures. Using SSF+PAL as a combined decoder, we find an order-of-magnitude improvement in the logical error rate.
Hypergraph product (HGP) codes are one of the most popular family of quantum low-density parity-check (LDPC) codes. Circuit-level simulations show that they can achieve the same logical error rate as surface codes with a reduced qubit overhead. They have been extensively optimized by importing classical techniques such as the progressive edge growth, or through random search, simulated annealing or reinforcement learning techniques. In this work, instead of machine learning (ML) algorithms that improve the code performance through local transformations, we impose additional global symmetries, that are hard to discover through ML, and we perform an exhaustive search. Precisely, we focus on the hypergraph product of two cyclic codes, which we call CxC codes and we study C2 codes which are the product a cyclic code with itself and CxR codes which are the product of a cyclic codes with a repetition code. We discover C2 codes and CxR codes that significantly outperform previously optimized HGP codes, achieving better parameters and a logical error rate per logical qubit that is up to three orders of magnitude better. Moreover, some C2 codes achieve simultaneously a lower logical error rate and a smaller qubit overhead than state-of-the-art LDPC codes such as the bivariate bicycle codes, at the price of a larger block length. Finally, leveraging the cyclic symmetry imposed on the codes, we design an efficient planar layout for the QCCD architecture, allowing for a trapped ion implementation of the syndrome extraction circuit in constant depth.