Optical imaging plays a central role in ultracold atom experiments by enabling quantitative measurements of atomic density, temperature, atom number, and condensate dynamics. Achieving high-fidelity absorption imaging requires a well-characterized optical system with accurately calibrated magnification and spatial resolution. In this work, I designed, implemented, and experimentally characterized a dual-view optical imaging platform for future absorption imaging of ultracold sodium atoms. The system consists of two independent three-lens relay imaging systems providing top and side views of the atomic sample. Two low-magnification configurations with nominal magnification 0.6 were developed for imaging the relatively large sodium magneto-optical trap (MOT), while higher-magnification configurations with nominal magnifications of 4 and 10 were designed for Bose–Einstein condensate (BEC) imaging. The work included the integration and optimization of the laser cooling and trapping apparatus, improvements to the magnetic-field control system, and the alignment and calibration of both imaging paths. Characterization using a laser and a USAF 1951 resolution target yielded measured magnifications of 0.653 ± 0.033 and 0.521 ± 0.016 for the side and top MOT imaging systems, with corresponding spatial resolutions of 13.92 µm and 9.84 µm. The BEC imaging systems achieved measured magnifications of 4.094 ± 0.060 (top) and 10.817 ± 0.172 (side), with spatial resolutions of 9.84 µm and 6.20 µm, respectively. These measurements agree well with the theoretical diffraction-limited resolutions of 7.19 µm for the 0.6 and 4 magnification systems and 2.87 µm for the 10 magnification system, with the remaining differences attributed primarily to practical optical aberrations and alignment tolerances. The calibrated dual-view imaging platform provides the spatial resolution and quantitative accuracy required for absorption imaging of ultracold sodium atoms and establishes the experimental foundation for future investigations of sodium magneto-optical traps, Bose–Einstein condensation, and coherent spin dynamics in spinor sodium gases.
Optical imaging plays a central role in ultracold atom experiments by enabling quantitative measurements of atomic density, temperature, atom number, and condensate dynamics. Achieving high-fidelity absorption imaging requires a well-characterized optical system with accurately calibrated magnification and spatial resolution. In this work, I designed, implemented, and experimentally characterized a dual-view optical imaging platform for future absorption imaging of ultracold sodium atoms. The system consists of two independent three-lens relay imaging systems providing top and side views of the atomic sample. Two low-magnification configurations with nominal magnification 0.6 were developed for imaging the relatively large sodium magneto-optical trap (MOT), while higher-magnification configurations with nominal magnifications of 4 and 10 were designed for Bose–Einstein condensate (BEC) imaging. The work included the integration and optimization of the laser cooling and trapping apparatus, improvements to the magnetic-field control system, and the alignment and calibration of both imaging paths. Characterization using a laser and a USAF 1951 resolution target yielded measured magnifications of 0.653 ± 0.033 and 0.521 ± 0.016 for the side and top MOT imaging systems, with corresponding spatial resolutions of 13.92 µm and 9.84 µm. The BEC imaging systems achieved measured magnifications of 4.094 ± 0.060 (top) and 10.817 ± 0.172 (side), with spatial resolutions of 9.84 µm and 6.20 µm, respectively. These measurements agree well with the theoretical diffraction-limited resolutions of 7.19 µm for the 0.6 and 4 magnification systems and 2.87 µm for the 10 magnification system, with the remaining differences attributed primarily to practical optical aberrations and alignment tolerances. The calibrated dual-view imaging platform provides the spatial resolution and quantitative accuracy required for absorption imaging of ultracold sodium atoms and establishes the experimental foundation for future investigations of sodium magneto-optical traps, Bose–Einstein condensation, and coherent spin dynamics in spinor sodium gases.
Spinor Bose Einstein condensates have widely been sought after as perfect emulators of condensed matter phenomena, providing widely tunable and highly controlled systems. Utilizing a novel spin sensitive phase contrast imaging technique, the vector magnetization is measured in-situ with high spatial and temporal resolution and applied to a number of experiments. Using optically trapped F = 1 87Rb spinor condensates, the equilibrium phase diagram of a spin-1 Bose gas is quantitatively explored by observing the evolution of unmagnetized spin textures and their thermal equilibrium properties. Spin domain coarsening and a strong dependence of the spin configuration on the quadratic Zeeman shift is observed, supporting the predicted mean-field equilibrium phase diagram for small values of the quadratic shift. Additionally, spinor Bose gases are demonstrated to be an effective tool in calibrating and characterizing experimental imaging systems. Sinusoidal test patterns of varying pitch are created and used to extract the modulation transfer function and quantify optical aberrations which are of immense importance in systems which claim to have high spatial resolution. Lastly we realize an optical kagome geometry in a two-dimensional optical superlattice with a scalar Bose gases. The optical superlattice can be tuned between various geometries, including kagome, one-dimensional stripe, and decorated triangular lattice. Using atom optics we characterize the various geometries and demonstrate the versatility of this optical superlattice. The kagome geometry presents a new experimental arena for studies of geometrically frustrated systems.
In this work we constructed an experimental system to realize a BEC of sodium atoms. In the first part of the work, we study two atomic sources in order to choose the most suitable for our system. The comparison between a Zeeman slower and a bidimensional magnetooptical trap (2D-MOT) was performed to evaluate the capacity of producing an appropiate flux of atoms in order to load a tridimensional magneto-optical trap (3D-MOT). The experimental results show that the 2D-MOT is as efficient as the Zeeman slower with the advantage of being more compact and easier to operate, and for these reasons we choose it as our source of cold atoms. After this, the experimental apparatus to produce a Bose-Einstein condensate was constructed and characterized. With this experimental system we realized all the required stages to achieve the Bose-Einstein condensation (BEC). Initially, we characterized and compared the performance between the Bright-MOT and Dark-SPOT MOT of sodium atoms, observing the great advantages this last configuration offers. Afterward, we implemented the experimental sequence for the achivement of the BEC of sodium atoms. After the optical molasses process, the atoms are tranferred to an optically plugged quadrupole trap (OPT) where the process of evaporative cooling is performed. With this setup, we achive a sodium BEC with ∼ 5×105 atoms and a critical temperature of ∼ 1.1 μK. Finally, with the constructed and characterized machine, we started to perform experiments of cooperative absorption of two photons by two trapped atoms. With the new system, we wanted to take advantage of the higher densities in the magnetic trap and BEC to explore some features of this phenomenon in the classical and quantum regimes. We were interested in exploring some features of this nonlinear light-matter interaction effect. The idea of having two or more photons interacting with two or more atoms is the beginning of a new possible class of phenomena that we could call many photons-many body intercation. In this new possibity, photons and atoms will be fully correlated, introducing new aspects of interactions.
This thesis describes the design, construction and optimisation of a new apparatus to produce Bose-Einstein condensates (BECs) of 87Rb atoms. The main aim in building this system was to include a high resolution imaging system capable of resolving single atoms. Optical access for the imaging system was created by including a stage of atom transport in which the atoms are magnetically transferred ~50 cm from a magneto-optical trap (MOT), where they are initially collected, to a glass science cell where experiments are carried out and imaging takes place. Two magnetic transport schemes have been demonstrated, based on approaches first used in other laboratories. First, a scheme in which the atoms are transferred in a moving pair of magnetic trapping coils. Second, a hybrid scheme where the atoms are translated part of the distance in the moving coils, and the rest of the way by switching the current in a chain of fixed coils. This second scheme was designed to allow optical access for a high numerical aperture microscope objective to be placed immediately next to the science cell for high resolution imaging.The atoms were first collected in a large pyramid MOT which can be loaded with 3 × 10^9 atoms in a time of 20 s. Around half of these atoms – those in the |F = 1, mF = −1> magnetic substate – were then magnetically trapped prior to transport. The typical fraction of the trapped atoms transferred to the science cell was ~30% and ~18% for the moving coils and hybrid schemes respectively.Evaporative cooling was carried out on the atom cloud following transport with the moving coils and loading into a time-orbiting potential trap. The optimised cooling sequence lasted for 28 s and consistently produced a pure condensate with 5 × 10^5 atoms. A BEC has also been produced by evaporative cooling following hybrid transport. The next experimental steps will be to optimise the hybrid transfer approach further and install the high resolution imaging system.The system is well-placed to continue an ongoing series of experiments in which ultracold atoms are trapped in RF-dressed potentials. These potentials will be used to study low-dimensional quantum gases as well as in experiments where small atom number BECs are rapidly rotated to enter the fractional quantum Hall regime.
In this thesis, we develop, validate and apply a non-destructive, spin-sensitive probing method for ultracold gases of sodium. By exploiting the polarization dependence of the atom-light interaction, the method combines optical hardware with computational reconstruction to access spin-resolved density and magnetization distributions from a single, minimally destructive exposure. The thesis is structured in three parts; firstly, we describe the experimental platform for making, probing and manipulating sodium spinor Bose–Einstein condensates, including laser cooling, optical and magnetic trapping, and radio-frequency techniques for coherent spin preparation. In the second part, we develop the core measurement technique of spin-dependent off-axis holography is developed, and evaluate its robustness to technical noise and the magnetic field variations. The reconstruction and analysis pipeline is presented in detail, with special emphasis on the background noise suppression using an inpainting technique based on principal component analysis. In the final part, the method is applied to investigate dynamics in spin-1 ultracold atomic sodium. To that end, we introduce the theory of three-level spin systems and propose magnetization-preparation and precise Zeeman-sublevel readout schemes, which are experimentally verified. These tools are then used to investigate spin diffusion and spin mixing dynamics, and the formation and evolution of spin domains. This work establishes spin-dependent off-axis holography as a powerful tool for probing spinor quantum gases. The techniques developed here enable efficient and minimally destructive imaging of spin dynamics, and provide new opportunities for studying non-equilibrium spin phenomena and magnetism in ultracold atomic systems.
Optical trapping as a viable means of exploring the physics of ultracold dilute atomic gases has revealed a new spectrum of physical phenomena. In particular, macroscopic and sudden occupation of the ground state below a critical temperature—-a phenomenon known as Bose-Einstein condensation—-has become an even richer system for the study of quantum mechanics, ultracold collisions, and many-body physics in general. Optical trapping liberates the spin degree of the BEC, making the order parameter vectorial (‘spinor BEC’), as opposed to the scalar order of traditional magnetically trapped condensates. The work described within is divided into two main efforts. The first encompasses the all-optical creation of a Bose-Einstein condensate in rubidium vapor. An all-optical path to spinor BEC (as opposed to transfer to an optical trap from a magnetic-trap condensate) was desired both for the simplicity of the experimental setup and also for the potential gains in speed of creation; evaporative cooling, the only known path to dilute-gas condensation, works only as efficiently as the rate of elastic collisions in the gas, a rate that starts out much higher in optical traps. The first all-optical BEC was formed elsewhere in 2001; the years following saw many groups worldwide seeking to create their own version. Our own all-optical spinor BEC, made with a single-beam dipole trap formed by a focused CO₂ laser, is described here, with particular attention paid to trap loading, measurement of trap parameters, and the use of a novel 780 nm high-power laser system. The second part describes initial experiments performed with the nascent condensate. The spinor properties of the condensate are documented, and a measurement is made of the density-dependent rate of spin mixing in the condensate. In addition, we demonstrate a novel dual-beam atom laser formed by outcoupling oppositely polarized components of the condensate, whose populations have been coherently evolved through spin dynamics. We drive coherent spin-mixing evolution through adiabatic compression of the initially weak trap. Such dual beams, nominally number-correlated through the angular momentum-conserving collision m=0 + m=0 ⇌ m=+1 + m=-1 have been proposed as tools to explore entanglement and squeezing in Bose-Einstein condensates.
In this thesis, we develop, validate and apply a non-destructive, spin-sensitive probing method for ultracold gases of sodium. By exploiting the polarization dependence of the atom-light interaction, the method combines optical hardware with computational reconstruction to access spin-resolved density and magnetization distributions from a single, minimally destructive exposure. The thesis is structured in three parts; firstly, we describe the experimental platform for making, probing and manipulating sodium spinor Bose–Einstein condensates, including laser cooling, optical and magnetic trapping, and radio-frequency techniques for coherent spin preparation. In the second part, we develop the core measurement technique of spin-dependent off-axis holography is developed, and evaluate its robustness to technical noise and the magnetic field variations. The reconstruction and analysis pipeline is presented in detail, with special emphasis on the background noise suppression using an inpainting technique based on principal component analysis. In the final part, the method is applied to investigate dynamics in spin-1 ultracold atomic sodium. To that end, we introduce the theory of three-level spin systems and propose magnetization-preparation and precise Zeeman-sublevel readout schemes, which are experimentally verified. These tools are then used to investigate spin diffusion and spin mixing dynamics, and the formation and evolution of spin domains. This work establishes spin-dependent off-axis holography as a powerful tool for probing spinor quantum gases. The techniques developed here enable efficient and minimally destructive imaging of spin dynamics, and provide new opportunities for studying non-equilibrium spin phenomena and magnetism in ultracold atomic systems.