To produce an operable quantum computer that is made with imperfect hardware, we must design and test scalable quantum error correcting codes that are suited for the devices we can build and, in unison, develop decoding strategies that accommodate device-specific noise characteristics. Here, we introduce the \emph{dynamic compass code}, a subsystem code with a novel syndrome extraction cycle, that has a competitive threshold while making efficient use of qubits arranged on a heavy-hex lattice. We use a superconducting qubit array to implement a distance-5 instance of this code, and demonstrate how detailed noise characterisation can boost decoder performance to yield significant improvements in logical error rates. We perform averaged circuit eigenvalue sampling (ACES) to acquire detailed context-dependent error information on all elements of the syndrome extraction process. Furthermore, we leverage soft information produced from measurement devices to augment the decoder with measurement error information and detect leakage errors for exclusion through post-selection. Our noise-informed approach yields up to 38.3\% improvement in the logical error rate of a distance-5 implementation of the dynamic compass code in experiment.
Noise is the fundamental challenge to quantum computation. Large-scale quantum computers will overcome this challenge with fault-tolerant architectures that leverage quantum error correction. This thesis introduces and investigates a scalable noise characterisation protocol suited to this key context. First, we introduce this protocol by building upon averaged circuit eigenvalue sampling (ACES), a framework for noise characterisation experiments that simultaneously estimates the Pauli error probabilities of all gates in a Clifford circuit and captures averaged spatial correlations between gates implemented simultaneously in the layers of the circuit. We demonstrate the scalability and performance of our protocol through circuit-level numerical simulations of the entire noise characterisation procedure. Then we demonstrate in circuit-level numerical simulation that this protocol is practically capable of calibrating a fast correlated matching decoder, enabling noise-aware decoding. We find that noise-aware decoding increases the error suppression factor of the code, leading to reductions in the logical error rate that increase exponentially with the code distance. Finally, we present several results obtained from experimentally implementing this protocol. We use the noise characterisation results to design an improved syndrome extraction circuit for a heavy hexagon memory that is adapted to the noise characteristics of the quantum device. The model error of our noise characterisation results suggests that the circuit-level Pauli noise model estimated by ACES can describe the essential features of quantum noise. We also operate a heavy hexagon memory and use noise estimates to predict performance and inform decoding. These results demonstrate that Pauli noise estimates can calibrate decoders to enable noise-aware decoding and inform the co-design of quantum error correcting codes, decoders, fault-tolerant circuits, and quantum devices.
Quantum error correction (QEC) is essential for scalable quantum computing. However, it requires classical decoders that are fast and accurate enough to keep pace with quantum hardware. While quantum low-density parity-check codes have recently emerged as a promising route to efficient fault tolerance, current decoding algorithms do not allow one to realize the full potential of these codes in practical settings. Here, we introduce a convolutional neural network decoder that exploits the geometric structure of QEC codes, and use it to probe a novel "waterfall" regime of error suppression, demonstrating that the logical error rates required for large-scale fault-tolerant algorithms are attainable with modest code sizes at current physical error rates, and with latencies within the real-time budgets of several leading hardware platforms. For example, for the
[144,12,12] Gross code, the decoder achieves logical error rates up to
∼17x below existing decoders - reaching logical error rates
∼10−10 at physical error
p=0.1% - with 3-5 orders of magnitude higher throughput. This decoder also produces well-calibrated confidence estimates that can significantly reduce the time overhead of repeat-until-success protocols. Taken together, these results suggest that the space-time costs associated with fault-tolerant quantum computation may be significantly lower than previously anticipated.
Quantum error correction (QEC) is crucial for the reliable implementation of quantum computers, as qubits are extremely sensitive to environmental noise. Traditional approaches to QEC often suffer from computational complexity, particularly when scaling to larger qubit systems. This work explores the application of tensor networks as a novel method for representing and manipulating quantum error correction codes. We demonstrate that tensor networks provide a compact and efficient framework for encoding and decoding quantum information, potentially mitigating the scalability issues inherent in conventional QEC schemes. Specifically, we leverage the ability of tensor networks to represent the entanglement structure of codes, allowing for efficient simulation and decoding of noisy quantum computations. This approach offers a promising avenue for developing scalable QEC protocols. The core claim is that tensor networks offer a compact and efficient representation for quantum error correction codes. The core mechanism involves utilizing tensor networks to represent the entanglement structure of quantum error correction codes, enabling efficient simulation and decoding of noisy quantum computations.