Finding the ground state energy of a molecule is a fundamental task in quantum chemistry. This process typically involves solving for the lowest eigenstate of a Hamiltonian matrix, whose dimensions scale as a function of the number of active spin-orbitals. Solving this problem is exponentially demanding on classical computers, restricting exact solutions to small- and medium-sized molecules. However, quantum computers can theoretically perform this task more efficiently using a quantum algorithm known as Quantum Phase Estimation (QPE). Unfortunately, current quantum computers are noisy and lack sufficient physical qubits to implement QPE effectively. This era of quantum computing, marked by noise and limited qubit counts, is referred to as the Noisy Intermediate-Scale Quantum (NISQ) era. To address these hardware limitations, a hybrid algorithm called the Variational Quantum Eigen- solver (VQE) was developed in 2014. VQE significantly reduces the hardware requirements for solving the ground state energy problem compared to QPE. For VQE to achieve a quantum advantage on NISQ-era quantum computers, careful selection of implementation methods is essential. Poor implementation can negate any quantum advantage the algorithm might offer. Key considerations in VQE include choosing the initial state ansatz, ansatz parametrization, fermion-to-Pauli mapping, and measurement scheme. The selection and optimization of these components are complex and remain active areas of research. We compared these methods on molecules with between four and 24 spin-orbitals. Our findings indicate that the Bravyi-Kitaev fermion-to-Pauli encoding is the most effective for systems with 16 or more spin-orbitals in terms of accuracy. For observables, the Jordan-Wigner encoding and Qubit-Wise Commuting (QWC) measurement scheme resulted in the lowest count—31% fewer than Bravyi-Kitaev at 24 spin-orbitals. Overall, we found that a combination of the QWC measurement scheme and hardware-efficient ansatz parametrization performed best, providing a scalable speed-up in orders of magnitude in a noisy emulation of a quantum computer compared to similar VQE runs using the Pauli measurement scheme and Jordan-Wigner encoding. This speed-up was observed across all simulated molecules and was particularly notable for water, where computational time was reduced from 28 hours to just 10 minutes.
Finding the ground state energy of a molecule is a fundamental task in quantum chemistry. This process typically involves solving for the lowest eigenstate of a Hamiltonian matrix, whose dimensions scale as a function of the number of active spin-orbitals. Solving this problem is exponentially demanding on classical computers, restricting exact solutions to small- and medium-sized molecules. However, quantum computers can theoretically perform this task more efficiently using a quantum algorithm known as Quantum Phase Estimation (QPE). Unfortunately, current quantum computers are noisy and lack sufficient physical qubits to implement QPE effectively. This era of quantum computing, marked by noise and limited qubit counts, is referred to as the Noisy Intermediate-Scale Quantum (NISQ) era. To address these hardware limitations, a hybrid algorithm called the Variational Quantum Eigen- solver (VQE) was developed in 2014. VQE significantly reduces the hardware requirements for solving the ground state energy problem compared to QPE. For VQE to achieve a quantum advantage on NISQ-era quantum computers, careful selection of implementation methods is essential. Poor implementation can negate any quantum advantage the algorithm might offer. Key considerations in VQE include choosing the initial state ansatz, ansatz parametrization, fermion-to-Pauli mapping, and measurement scheme. The selection and optimization of these components are complex and remain active areas of research. We compared these methods on molecules with between four and 24 spin-orbitals. Our findings indicate that the Bravyi-Kitaev fermion-to-Pauli encoding is the most effective for systems with 16 or more spin-orbitals in terms of accuracy. For observables, the Jordan-Wigner encoding and Qubit-Wise Commuting (QWC) measurement scheme resulted in the lowest count—31% fewer than Bravyi-Kitaev at 24 spin-orbitals. Overall, we found that a combination of the QWC measurement scheme and hardware-efficient ansatz parametrization performed best, providing a scalable speed-up in orders of magnitude in a noisy emulation of a quantum computer compared to similar VQE runs using the Pauli measurement scheme and Jordan-Wigner encoding. This speed-up was observed across all simulated molecules and was particularly notable for water, where computational time was reduced from 28 hours to just 10 minutes.
Accurate determination of ground-state energies for molecules remains a challenge in quantum chemistry and a cornerstone for progress in fields such as drug discovery and materials design. The Variational Quantum Eigensolver (VQE) represents a leading hybrid quantum-classical paradigm for addressing this challenge; however, its widespread realization is limited by noise and the restricted scalability of current quantum hardware. Achieving efficient simulations on Noisy Intermediate-Scale Quantum (NISQ) devices and forthcoming Fault-Tolerant Application-Scalable Quantum (FASQ) systems demands a detailed understanding of how computational resources scale with molecular complexity and fermion-to-qubit encodings. In this study, resource requirements for VQE implementations employing the Unitary Coupled Cluster Singles and Doubles (UCCSD) ansatz are systematically analyzed. The molecular Hamiltonian is formulated in second quantization and mapped to qubit operators through the Jordan-Wigner (JW), Bravyi-Kitaev (BK), and Parity (Pa) transformations. Hamiltonian reduction strategies, including Z2 tapering and frozen-core approximations, are examined to assess their effect on quantum resource scaling. The analysis reveals that appropriate transformations, when combined with symmetry-based reductions, can substantially reduce qubit counts by up to ≈50% and quantum gate counts by up to ≈27.5× and Hamiltonian Pauli string counts by up to ≈2.75×, relative to the corresponding unreduced Hamiltonian representations within the same active-space configuration for the representative set of molecular systems under study. These findings provide practical circuit-level insights for executing chemically relevant simulations on NISQ hardware, while establishing physical-resource baselines that may inform future logical-level analyses targeting FASQ systems.
Variational quantum eigensolvers (VQEs) are among the most promising quantum algorithms for solving electronic structure problems in quantum chemistry, particularly during the noisy intermediate-scale quantum (NISQ) era. In this study, we investigate the capabilities and limitations of VQE algorithms implemented on current quantum hardware for determining molecular ground-state energies, focusing on the adaptive derivative-assembled pseudo-Trotter ansatz VQE (ADAPT-VQE). To address the significant computational challenges posed by molecular Hamiltonians, we explore various well known strategies to simplify the Hamiltonian, optimize the ansatz, and improve classical parameter optimization through modifications of the COBYLA optimizer. These enhancements are integrated into a tailored quantum computing implementation designed to minimize the circuit depth and computational cost. Using benzene as a benchmark system, we demonstrate the application of these optimizations on an IBM quantum computer. Despite these improvements, our results highlight the limitations imposed by current quantum hardware, particularly the impact of quantum noise on state preparation and energy measurement. The noise levels in today's devices prevent meaningful evaluations of molecular Hamiltonians with sufficient accuracy to produce reliable quantum chemical insights. Finally, we extrapolate the requirements for future quantum hardware to enable practical and scalable quantum chemistry calculations using VQE algorithms. This work provides an assessment of current quantum algorithms for molecular modeling on real quantum hardware, highlighting the impact of noise and hardware limitations on the achievable accuracy.
The variational quantum eigensolver (VQE) is a hybrid quantum-classical algorithm designed for noisy intermediate-scale quantum (NISQ) hardware to estimate eigenvalues of many-body Hamiltonians. Unlike fully quantum approaches such as quantum phase estimation (QPE), VQE trades deep coherent circuits for repeated state preparation, measurement, and classical optimization, making it more compatible with limited qubit counts and finite coherence times. Recent developments have focused on reducing quantum resource requirements while retaining chemically meaningful wavefunction structure. In this paper, we examine recent progress in VQE methods for molecular electronic structure with an emphasis on three themes: (i) strategies for circuit and ansatz complexity reduction, including adaptive and selectively screened approaches, (ii) chemically motivated workflows that combine VQE with orbital optimization, fragmentation, and localized active-space ideas to better address strong correlation, and (iii) extensions of VQE to excited-state calculations. Throughout, we emphasize the tradeoffs among parameter count, gate depth, symmetry preservation, measurement overhead, and classical preprocessing, and discuss where these approaches may become most useful for chemically challenging active spaces. We also highlight benchmarking considerations for assessing both accuracy and resource requirements, and conclude with a perspective on regimes in which VQE may offer the greatest long-term value, particularly multireference active spaces and low-lying excited-state manifolds.
Quantum computing has emerged as a transformative approach for tackling complex problems in quantum chemistry, particularly in simulating multielectron systems and electron-phonon interactions. However, the current noisy intermediate-scale quantum (NISQ) devices face significant challenges in implementing practical quantum algorithms due to error accumulation caused by increased circuit depth, qubit counts, and gate operations. To address these challenges, we present TenCirChem, an open-source Python package specifically designed for implementing variational quantum algorithms in quantum computational chemistry. TenCirChem demonstrates exceptional performance in simulating unitary coupled-cluster circuits through its innovative use of compact representations for quantum states and excitation operators. This package supports noisy circuit simulation and provides advanced algorithms for variational quantum dynamics, enabling researchers to explore complex chemical phenomena. Its capabilities are exemplified in various applications, including the calculation of potential energy curves and the investigation of quantum gate error impacts on molecular systems. Moreover, TenCirChem’s seamless integration with real quantum hardware makes it a versatile tool for both simulation and experimentation. A key innovation developed within the TenCirChem framework is the Clifford-based Hamiltonian engineering approach for molecules (CHEM). This algorithm addresses the critical challenge of achieving chemical accuracy with shallow quantum circuits, a fundamental requirement for practical applications on NISQ devices. CHEM employs a sophisticated Clifford-based Hamiltonian transformation that operates within the variational quantum eigensolver (VQE) framework using hardware-efficient ansatz. The method ensures four crucial advantages: (1) generation of initial circuit parameters corresponding to Hartree-Fock energy, (2) maximization of initial energy gradients with respect to circuit parameters, (3) minimal classical processing overhead without additional quantum resource requirements, and (4) compatibility with any circuit topology. Through quantum hardware emulator demonstrations, CHEM has achieved chemical accuracy for systems up to 12 qubits with fewer than 30 two-qubit gates, representing a significant advancement in practical quantum computational chemistry. To enhance the efficiency of variational quantum algorithms, we developed the sequential optimization with approximate parabola (SOAP) method, specifically designed for parameter optimization in unitary coupled-cluster ansatz. SOAP addresses the critical bottleneck of measurement requirements in VQE by implementing an innovative optimization strategy that approximates the energy landscape as quadratic functions. This approach minimizes the number of energy evaluations while incorporating parameter correlations through the integration of average directions from previous iterations. Benchmark studies demonstrate SOAP’s superior performance, showing faster convergence and enhanced noise robustness compared to traditional optimization methods. The method’s scalability has been validated through numerical simulations of up to 20 qubits, and its practical efficacy has been confirmed through experiments on superconducting quantum computers. For simulating electron-phonon systems, we introduce a variational basis state encoding algorithm that significantly reduces resource requirements compared to conventional unary and binary encoding schemes. Our approach achieves smaller scaling than traditional methods for qubits and gates for systems obeying the area law of entanglement entropy, this remarkable reduction in resource requirements comes at the cost of a constant amount of additional measurements. The algorithm’s effectiveness has been validated through both numerical simulations and quantum hardware experiments, demonstrating that using just one or two qubits per phonon mode can produce quantitatively accurate results across various coupling regimes. The integration of these innovations within the TenCirChem library represents a significant advancement in quantum computational chemistry. The software package provides researchers with a comprehensive toolkit for developing, testing, and implementing quantum algorithms, while the novel methods address fundamental challenges in circuit depth, parameter optimization, and resource efficiency. These developments collectively enhance the practicality of quantum computing for addressing real-world chemical problems in the NISQ era, offering improved accuracy, efficiency, and noise robustness.
High Resolution Image Download MS PowerPoint Slide The recent developments of quantum computing present novel potential pathways for quantum chemistry as the scaling of the computational power of quantum computers could be harnessed to naturally encode and solve electronic structure problems. Theoretically exact quantum algorithms for chemistry have been proposed (e.g., quantum phase estimation), but the limited capabilities of current noisy intermediate-scale quantum devices motivated the development of less demanding hybrid algorithms. In this context, the variational quantum eigensolver (VQE) algorithm was successfully introduced as an effective method to compute the ground-state energies of small molecules. This study investigates the folded spectrum (FS) method as an extension of the VQE algorithm for the computation of molecular excited states. It provides the possibility of directly computing excited states around a selected target energy using the same or quantum circuit as for the ground-state calculation. Inspired by the variance-based methods from the quantum Monte Carlo literature, the FS method minimizes the energy variance, thus, in principle, requiring a computationally expensive squared Hamiltonian to be applied. We alleviate this potentially poor scaling by employing a Pauli grouping procedure to identify sets of commuting Pauli strings that can be evaluated simultaneously. This allows for a significant reduction in the computational cost. We applied the FS-VQE method to small molecules (H 2, LiH), obtaining all electronic excited states with chemical accuracy on ideal quantum simulators. Furthermore, we explore the application of quantum error mitigation techniques, demonstrating improved energy accuracy on noisy simulators compared with simulations without mitigation.
Abstract The variational quantum eigensolver (VQE) is a method that uses a hybrid quantum-classical computational approach to find eigenvalues of a Hamiltonian. VQE has been proposed as an alternative to fully quantum algorithms such as quantum phase estimation (QPE) because fully quantum algorithms require quantum hardware that will not be accessible in the near future. VQE has been successfully applied to solve the electronic Schrödinger equation for a variety of small molecules. However, the scalability of this method is limited by two factors: the complexity of the quantum circuits and the complexity of the classical optimization problem. Both of these factors are affected by the choice of the variational ansatz used to represent the trial wave function. Hence, the construction of an efficient ansatz is an active area of research. Put another way, modern quantum computers are not capable of executing deep quantum circuits produced by using currently available ansatzes for problems that map onto more than several qubits. In this review, we present recent developments in the field of designing efficient ansatzes that fall into two categories—chemistry–inspired and hardware–efficient—that produce quantum circuits that are easier to run on modern hardware. We discuss the shortfalls of ansatzes originally formulated for VQE simulations, how they are addressed in more sophisticated methods, and the potential ways for further improvements.