The Korea Research Institute of Standards and Science (KRISS) has played an important role in advancing photometry and radiometry metrology, contributing significantly to the establishment and evolution of measurement standards. KRISS has actively participated in international collaborations, including 10 comparisons under the Consultative Committee for Photometry and Radiometry Key Comparisons (CCPR-KC) and 10 comparisons under the Asia Pacific Metrology Programme (APMP-KC and -SC), serving as a pilot institute in 7 cases. KRISS has led cutting-edge research in photon-based radiometric measurement standards, particularly focusing on the realization and dissemination of the SI base unit, candela. This research aligns with the growing global interest in photon-based technologies and their applications. Notable achievements include the world’s first testing services for Quantum Key Distribution (QKD) equipment, addressing emerging demands in quantum communication. Moreover, through the establishment of the spin-off company Qrad, KRISS aims to commercialize critical quantum technologies, such as single-photon sources, photon detectors, and performance evaluation systems. As the founding chair of the Few Photon Metrology Working Group under the CCPR, KRISS has spearheaded international collaborative research, positioning itself as a leader in future global standardization initiatives. The institute’s contributions extend to addressing evolving demands in strategic national industries, including space and defense, by developing broadband optical radiation measurement standards across UV to SWIR regions and advancing photometric quantum technologies. To meet the challenges posed by these demands, KRISS actively collaborates with stakeholders to integrate technical expertise into the early stages of policy and strategy formulation. These efforts aim to establish robust measurement capabilities for quantum and aerospace applications, including QKD test services and vicarious calibration in the MWIR region. Looking ahead, KRISS’s leadership in photon-based radiometric measurement standards and its strategic initiatives are expected to drive significant advancements in photometry and radiometry, solidifying its role as a key contributor to international metrology.
The Korea Research Institute of Standards and Science (KRISS) has played an important role in advancing photometry and radiometry metrology, contributing significantly to the establishment and evolution of measurement standards. KRISS has actively participated in international collaborations, including 10 comparisons under the Consultative Committee for Photometry and Radiometry Key Comparisons (CCPR-KC) and 10 comparisons under the Asia Pacific Metrology Programme (APMP-KC and -SC), serving as a pilot institute in 7 cases. KRISS has led cutting-edge research in photon-based radiometric measurement standards, particularly focusing on the realization and dissemination of the SI base unit, candela. This research aligns with the growing global interest in photon-based technologies and their applications. Notable achievements include the world’s first testing services for Quantum Key Distribution (QKD) equipment, addressing emerging demands in quantum communication. Moreover, through the establishment of the spin-off company Qrad, KRISS aims to commercialize critical quantum technologies, such as single-photon sources, photon detectors, and performance evaluation systems. As the founding chair of the Few Photon Metrology Working Group under the CCPR, KRISS has spearheaded international collaborative research, positioning itself as a leader in future global standardization initiatives. The institute’s contributions extend to addressing evolving demands in strategic national industries, including space and defense, by developing broadband optical radiation measurement standards across UV to SWIR regions and advancing photometric quantum technologies. To meet the challenges posed by these demands, KRISS actively collaborates with stakeholders to integrate technical expertise into the early stages of policy and strategy formulation. These efforts aim to establish robust measurement capabilities for quantum and aerospace applications, including QKD test services and vicarious calibration in the MWIR region. Looking ahead, KRISS’s leadership in photon-based radiometric measurement standards and its strategic initiatives are expected to drive significant advancements in photometry and radiometry, solidifying its role as a key contributor to international metrology.
With a wide range of promising applications arising from unprecedented computing performance, quantum computing has recently received great attention. This technology that relies on quantum superposition and quantum entanglement can be realized in various physical platforms such as superconducting quantum devices, optical systems, semiconductor nanostructures and neutral atoms and so on. The Korea Research Institute of Standards and Science (KRISS), the national metrology institute of Korea, is actively carrying out research on quantum computing technologies with its extensive experience and expertise obtained from the development of measurement standards and precision measurement technologies based on diverse physical systems. In this article, we briefly discuss quantum computing research activities at KRISS.
Emerging technologies demand innovations in metrology: • Agility – to keep pace with a rapidly changing technical landscape; • Ability – to develop novel, perhaps first-ever, measurement capabilities; • Comparability and interoperability – across vendors, in commercial timeframes; • Accelerated delivery – because formal standards may be obsolete by the time they’re published. The same quantum technologies that have revolutionized metrology, such as Josephson junctions that are used to create the world’s most accurate voltage standards and ion traps that are used in time and frequency standards, also underpin emerging new markets in quantum computing, networking and sensing – and these quantum-based products require entirely new approaches for measurement and characterization. The world’s metrology institutes have been at the forefront of the quantum revolution, being both early developers and adopters of quantum technologies for metrology, and are uniquely poised to spearhead the development of metrology for quantum – those measurements and related standards needed by industry to underpin quantum-based products. The metrology community is positioned to create trust in the emerging quantum economy due to its long history of objectivity, neutrality and international collaboration; anticipating industry’s needs to be ready with rigorous measurement capabilities as technologies evolve; and its having formed institutions such as the CIPM, BIPM and IMEKO to support collaborative efforts. The BIPM hosted a workshop in March 2024 which brought together 149 participants from 43 NMIs and designated institutes (DIs) from 39 economies, along with industry representatives, to discuss how best to leverage the expertise of the worlds national metrology institutes (NMIs) and their designated institutes (DIs) to accelerate the development and adoption of quantum technologies through measurements and standards. The workshop supported coordinated development and sharing of measurement “best practices” in support of future standardization, the mission of a new collaborative initiative referred to as NMI-Q. The NMI-Q organizing committee, comprised of representatives of the NMIs of Australia, Canada, Germany, Italy, Japan, the United Kingdom, and the United States, are working on a cooperation framework inspired by the successful VAMAS organization, which conducts coordinated pre-standardization work in material science. NMI-Q has initiated early work in quantum photonics, and expects to expand to a breadth of technical areas, such as measurement and characterization to support multiple quantum computing platforms, quantum networking models, and sensing modalities.
Quantum technologies make it possible to obtain reproducible standards at any time and place without traceability chain. Centro Español de Metrología (CEM) has been using them for more than 20 years for standards such as voltage and resistance. Nowadays, the second quantum revolution has burst into the field of metrology in a radical way, offering tools and methods with unprecedented capabilities and transforming the classical view of this science, giving the opportunity to overcome limits that were considered unsurpassed. NMIs have a duty and obligation to take this potential and transform it into tangible benefits for science, industry and society. This goal, which is a major challenge for the whole community, is even greater for small and medium-sized NMIs. However, far from being a barrier, this should be an invitation to actively participate in this revolution. CEM has assumed a firm commitment to develop these quantum technologies. This has led to design and implement a comprehensive strategy to completely transform the Institute, from the most classical conception of metrology towards future quantum developments. As part of this strategy, several projects are being carried out with the aim of being an active actor in this global transformation, such as the following: An optical clock based on Calcium 40 ions is being implemented. This device will make use of an ion trap, a state-of-the-art technology which will enhance the capabilities of CEM offering higher levels of accuracy in our realisations. Furthermore, this project aims to establish, with ROA, national and international collaborations that will allow us to contribute to the advancement of this technology in the global scientific community. On another hand, optomechanical sensors have been proposed by the International Thermometry community which, by combining light-mater interaction with the vibrations of the device at the nanometric scale, allows the construction of primary quantum thermometer. CEM has been working in nano-photonic sensors based on photonic crystals in Si. It has been developed a free space-measuring set-up working at 1550 nm from 10 °C to 80 °C for the calibration of photonic integrated circuits (PICs). In addition, CEM is developing an experiment for the materialization of the pressure unit, the Pascal, by refractometry technique. This experiment has the aim of covering the pressure range of 1 Pa to 30 kPa with a target expanded uncertainty (k = 2) of 2 mPa + 10 ppm. This experiment is part of the European integrated metrological infrastructure for a SI-traceable quantum-pascal, and it is expected to be one pillar for primary materializations of other quantities. These developments are part of the ongoing transformation at CEM, with the aim of becoming a key player in the implementation of quantum technologies in metrology. Beyond our progress, the goal is to serve as a showcase and inspiration for all NMIs, regardless of their size or resources, to understand the importance of being part of this revolution. Our aim is to demonstrate that, with a clear strategy and a strong commitment, it is possible to be part of this historic change.
Single photon sources based on single emitters such as 2D materials and impurities in diamond are of great interest for many application fields including quantum communication, quantum metrology and quantum sensing. In photometry and radiometry, a single photon source, having the ability to emit only one photon in a well-defined time and frequency domain, represents a promising candidate to realize a photon number-based primary standard for quantum radiometry. At the Korea Research Institute of Standards and Science (KRISS), we have realized three kinds of single photon sources based on various single emitters at room temperature: silicon vacancy in diamond, defects in gallium nitride (GaN), and vacancy in hexagonal boron nitride (hBN). We found common factors related with the relaxation times of the internal states that indirectly affect the photon number stability. We observed a high photon number stability in the GaN emitter due to faster relaxation times compared with the hBN emitter, which on the other hand produced high rates of photons per second (> 106). Moreover, we demonstrate repeatable radiant flux measurements of a bright hBN single photon emitter for a wide radiant flux range from a few tens of femtowatts to one picowatt.
Advances in quantum mechanics have long underpinned metrology by enabling practical realizations of units through quantum effects. With the 2019 SI revision, traceability is anchored in defined fundamental constants, reinforcing the quantum-mechanical basis of modern standards. In parallel, quantum technologies are transitioning from laboratory science to engineering and early industrial deployment, bringing familiar pressures for integration, reliability, cost reduction, supply-chain formation, and standardization. The direction of benefit is thus reversing: metrology and precision measurement are becoming enabling infrastructure for the industrialization of quantum technologies. Against this backdrop, this paper surveys the metrology and precision-measurement capabilities required across representative quantum-computing modalities and identifies where electrical and related metrology can contribute to the development, characterization, and reliable operation of quantum hardware. We then discuss cross-cutting measurement needs and standardization opportunities that recur across platforms, and note how similar frameworks can extend to emerging quantum-sensing applications.
The second quantum revolution is underway and the deployment of Quantum Technologies (QT) keeps pace with it. This technological paradigm-switch creates opportunities and challenges for industry, innovation and society. Several large companies, as well as start-ups, have started to develop and engineer quantum devices or begun to integrate them into their products: the commercial success of QT, together with progress in research and development, relies on certification and reliability built upon internationally agreed standards and metrological traceability. A group of European National Metrology Institutes (NMIs) and Delegated Institutes (DIs) have recently created a European Metrology Network for Quantum Technologies (EMN-Q) under the auspices of EURAMET. The objective of the EMN-Q is to co-ordinate the activities of the European NMIs and Dis to ensure their efficient support for European competitiveness in quantum technologies. A special focus of the EMN-Q will be to develop new measurement capabilities and dedicated services to serve the rapidly-growing needs of industry and research institutions in this field. Industry, governmental agencies, academic sectors or any other type of stakeholder are welcome to contact the EMN-Q and discuss their metrology needs. These can relate not only to quantum characteristics of quantum devices, but also to metrology of key enabling technologies, metrology that can improve the supply chain of industrial quantum devices or other industrial needs connected with quantum technologies. EMN-Q aims to become is to become the central contact point to stakeholders interested in metrology for quantum technologies by: • contributing to standardisation & certification of quantum technologies; • promoting the take-up of metrology in the development of these technologies; • supporting industrial needs in synergy with the technological objectives of the EC Quantum Flagship and national quantum technology programs; and • promoting the use of quantum measurement techniques where advantageous for “classical” technical areas. We are in process of structuring and developing the communication services of the EMN-Q. One of the key aspect in this EMN-Q development is the establishment the EMN-Q Strategic Research Agenda (SRA). The SRA will contain the technological roadmaps that are created by the EMN-Q members in consultation with the EMN-Q Stakeholder Community. In this paper, we will provide a short overview of the EMN-Q organization, and of the SRA and the relative Technological Roadmaps.