Superconducting interferometers are quantum devices able to transduce a magnetic flux into an electrical output with excellent sensitivity, integrability, and power consumption. Yet, their voltage response is intrinsically nonlinear, a limitation which is conventionally circumvented through the introduction of compensation inductances or by the construction of complex device arrays. Here we propose an intrinsically linear flux-to-voltage mesoscopic transducer, exploiting the superconducting quantum interference proximity transistor (SQUIPT) as a fundamental building block, called bi-SQUIPT. It provides a voltage-noise spectral density as low as approximately ${10}^{\ensuremath{-}16}\phantom{\rule{0.2em}{0ex}}{\mathrm{V}/\mathrm{Hz}}^{1/2}$ and, more interestingly, under a proper operation parameter selection, exhibits a spur-free dynamic range as large as approximately
60 dB, a value on par with that obtained with state-of-the-art linear flux-to-voltage superconducting transducers based on superconducting quantum interference devices (SQUIDs). Furthermore, thanks to its peculiar measurement configuration, the bi-SQUIPT is tolerant to imperfections and nonidealities in general. For the above reasons, we believe that the bi-SQUIPT could provide a relevant step beyond in the field of low-dissipation and low-noise current amplification with a special emphasis on applications in cryogenic quantum electronics.
Superconducting quantum interference devices (SQUIDs) are state-of-the-art in ultra-sensitive magnetometry; however, conventional SQUID devices are fundamentally limited by the inherently nonlinear and periodic nature of their transfer function. Although flux-locked loop (FLL) configurations can mitigate this issue, they introduce electronic complexity and bandwidth constraints that hinder scalability in quantum circuits. In this work, we present an experimental demonstration of the bi-SQUIPT, a flux transducer that modulates the density of states in a proximitized superconducting weak link. The device employs a dual-loop architecture with differential readout, which enables cancellation of non-linearities typical of individual elements, achieving a voltage swing of approximately 120
μV. Measurements yield a spurious-free dynamic range (SFDR) of up to 60 dB, consistent with theoretical predictions and comparable to that of SQUID arrays, while maintaining power dissipation in the femtowatt range. The results further highlight a remarkable operational stability up to 600 mK, positioning the bi-SQUIPT as an enabling technology for high-density cryogenic quantum electronics.