Blockchain-based sensor networks rely on public-key cryptography for transaction verification, auditability, and data integrity. However, widely used public-key mechanisms are quantum-vulnerable in the presence of Cryptographically Relevant Quantum Computers (CRQCs), requiring sensor-to-blockchain transactions to address both post-quantum security and exposure control. This paper proposes a post-quantum sensor-to-blockchain transaction framework that minimizes CRQC-aware exposure while preserving low-cost auditability. It defines a transaction workflow that represents sensor data through hash-based commitments instead of storing raw measurements on-chain. The workflow combines Module-Lattice-Based Digital Signature Algorithm (ML-DSA)-based authentication, threshold-based authorization, Module-Lattice-Based Key Encapsulation Mechanism (ML-KEM)-protected relay communication, and an event-based smart contract (EBSC) for compact audit recording. A Quantum Exposure Score (QES) is introduced as a transaction-level metric to quantify CRQC-induced exposure across cryptographic, relay, key-lifecycle, migration-readiness, and authorization dimensions. The framework is evaluated using differential pulse voltammetry (DPV) electrochemical sensor data, Constrained Application Protocol (CoAP) communication, and a Ganache-based blockchain, with scalability runs of up to 10,000 sensor transactions and ablation baselines. Compared with full on-chain storage, EBSC reduces gas consumption by approximately 80%, while QES decreases from 100 in the classical open scenario to 4 in the full framework. These results demonstrate that the proposed design provides a practical path for post-quantum secure sensor-to-blockchain transactions.
Blockchain-based sensor networks rely on public-key cryptography for transaction verification, auditability, and data integrity. However, widely used public-key mechanisms are quantum-vulnerable in the presence of Cryptographically Relevant Quantum Computers (CRQCs), requiring sensor-to-blockchain transactions to address both post-quantum security and exposure control. This paper proposes a post-quantum sensor-to-blockchain transaction framework that minimizes CRQC-aware exposure while preserving low-cost auditability. It defines a transaction workflow that represents sensor data through hash-based commitments instead of storing raw measurements on-chain. The workflow combines Module-Lattice-Based Digital Signature Algorithm (ML-DSA)-based authentication, threshold-based authorization, Module-Lattice-Based Key Encapsulation Mechanism (ML-KEM)-protected relay communication, and an event-based smart contract (EBSC) for compact audit recording. A Quantum Exposure Score (QES) is introduced as a transaction-level metric to quantify CRQC-induced exposure across cryptographic, relay, key-lifecycle, migration-readiness, and authorization dimensions. The framework is evaluated using differential pulse voltammetry (DPV) electrochemical sensor data, Constrained Application Protocol (CoAP) communication, and a Ganache-based blockchain, with scalability runs of up to 10,000 sensor transactions and ablation baselines. Compared with full on-chain storage, EBSC reduces gas consumption by approximately 80%, while QES decreases from 100 in the classical open scenario to 4 in the full framework. These results demonstrate that the proposed design provides a practical path for post-quantum secure sensor-to-blockchain transactions.
The Google Quantum AI whitepaper [1] established that the secp256k1 elliptic curve discrete logarithm problem (ECDLP-256) the signature primitive securing the majority of public blockchain networks can be broken with fewer than 500,000 physical qubits in approximately nine minutes on a fast-clock cryptographically relevant quantum computer (CRQC), a roughly 20-fold reduction from prior estimates. That analysis addresses cryptocurrency nodes and does not model the structurally distinct risk profile of IoT/WSN nodes participating in blockchain networks. This paper closes that gap. We demonstrate that gateway-mediated transaction submission, combined with the duty-cycle wakeup latency endemic to IEEE 802.15.4-class sensor nodes, can extend the on-spend attack window beyond Bitcoin’s ten-minute block time making constrained WSN nodes more vulnerable to on-spend attacks than standard cryptocurrency clients for certain deployment configurations. We introduce a formal HNDL Risk Score (HRS) that jointly quantifies harvest-now/decrypt-later exposure, on-spend vulnerability, and migration feasibility as a function of node hardware class and deployment lifespan. We benchmark all four NIST-standardised post-quantum cryptography algorithms (ML-KEM-512, ML-DSA-44, FN-DSA/FALCON-512, SLH-DSA-128s) on representative WSN hardware (Raspberry Pi Pico RP2040 and ESP32) and identify FN-DSA/FALCON-512 as the superior candidate for WSN-blockchain transaction authentication, offering 666-byte signatures at 71.6 ms mean signing time on Cortex-M0+ hardware. A concrete, tiered migration roadmap is proposed for healthcare WSN, industrial IIoT, and smart city sensor deployments.
The emergence of cryptographically relevant quantum computers (CRQCs) would compromise today’s dominant public-key primitives (RSA, DiffieHellman, ECDSA), threatening long-lived confidentiality, authentication, and integrity guarantees across AI pipelines and blockchain networks. This manuscript proposes a unified, quantum-resilient architecture that blends NISTstandardized post-quantum cryptography (PQC)—MLKEM for key establishment and ML-DSA or SLH-DSA for digital signatures—with defense-in-depth controls for AI model protection, data privacy, and blockchain protocol evolution. We first motivate the need for migration by outlining quantum attacks (Shor for factoring and discrete logarithms; Grover for quadratic search speedups) and summarize PQC standardization milestones and transition guidance. We then review the literature on lattice-based and hash-based cryptography, homomorphic encryption for privacy-preserving AI, and secure aggregation/differential privacy as complementary privacy technologies. Building on this foundation, we present a methodology for designing and evaluating quantum-resistant AI and blockchain systems, including key-lifecycle hardening, protocol-level hybrids, and crypto-agility. A simulated deployment (1,000 clients; 16 validator nodes; TLS 1.3 with ML-KEM and hybrid handshakes; blockchain transactions signed with ML-DSA and SLH-DSA) measures handshake and signing overheads, throughput, and model-training privacy-utility trade-offs. Results indicate that: (i) PQC-only handshakes add modest latency yet remain acceptable for online APIs; (ii) hybrid ECDHE+ML-KEM offers near-term defense against “store-now-decrypt-later,” with predictable cost; (iii) ML-DSA is practical for blockchain validation at common block sizes, while SLH-DSA suits firmware/codesigning and archival integrity; and (iv) combining PQC with secure aggregation and differentially private training preserves model utility with bounded overhead.
Blockchain systems are fundamentally dependent on classical cryptographic primitives, which are increasingly threatened by the rapid advancement of quantum computing. In cross-chain communication and interoperability protocols, where safe asset transfer and validation across heterogeneous networks are crucial, this danger is especially serious. Ensuring quantum-resilient interoperability is crucial for preserving security, trust, and long-term sustainability as next-generation blockchain ecosystems move toward multi-chain architectures. Relays, bridges, and atomic swaps are examples of existing interoperability methods that mostly rely on public-key cryptography, which is susceptible to quantum assaults like Shor's algorithm. In the post-quantum era, this vulnerability puts digital assets and cross-chain transactions at risk of compromise. This paper suggests a quantum-resilient cross-chain interoperability protocol framework to overcome this difficulty and allow safe and effective communication between various blockchain platforms. The suggested design incorporates post-quantum cryptographic techniques, such as hash-based and lattice-based signature algorithms, with consensus bridging and cross-chain transaction validation procedures. Additionally, a hybrid cryptographic transition model is presented to provide a progressive transition towards quantum-safe primitives while guaranteeing backward compatibility with current classical systems. The proposed structure greatly increases resilience against quantum attackers while maintaining interoperability efficiency, according to experimental evaluation. Robustness against replay attacks, signature forging, and key compromise under quantum threat models is confirmed by security analysis. The suggested protocol ensures strong and quantum-resilient interoperability in next-generation blockchain infrastructures by offering a scalable and future-ready foundation for safe multi-chain ecosystems.
With the development of quantum computing, classical cryptosystems (RSA, ECDSA) that ensure the security of distributed ledgers face an existential threat. This paper examines protocols for protecting personal data (PD) in blockchain, taking into account the “Harvest Now, Decrypt Later” strategy. We propose and formalize a family of protocols designed for storing and exchanging personal data in blockchain systems. The article describes in detail approaches to software implementations of smart contracts for the Ethereum (using ECIES (Elliptic Curve Integrated Encryption Scheme) and Keccak-256) and Hyperledger Fabric 2.5 (integrating NIST post-quantum standards: ML-KEM (Module-Lattice-Based Key Encapsulation Mechanism) and ML-DSA (Module-Lattice-Based Digital Signature Algorithm)) platforms based on the developed protocols. For all developed protocols, a Threat Agent Model (TAM) is presented, threat scenarios are examined, and resilience to typical attack scenarios is demonstrated. A comparative analysis of computational efficiency and overhead is conducted. The results show that using lattice cryptography provides high performance, but the 50-fold increase in signature size makes direct implementation of PQC (Post-Quantum Cryptography) in Layer 1 public networks economically unfeasible. A hybrid model and the use of Layer 2 to ensure quantum resistance are proposed.
Quantum computing poses a significant threat to Wireless Sensor Networks (WSNs) by undermining traditional cryptographic algorithms such as RSA and Elliptic Curve Cryptography (ECC). This work proposes a quantum-safe architecture for WSNs that integrates post-quantum cryptography (PQC) with lightweight IoT protocols to ensure long-term confidentiality, authenticity, and resilience. The framework leverages ML-KEM for key encapsulation and ML-DSA/SLH-DSA for signatures, and seamlessly integrates with EDHOC, OSCORE, and COSE. A novel Efficient Adaptive Parameter Selection (EAPS) mechanism dynamically adjusts cryptographic strength to balance security, energy consumption, and latency under varying network conditions. Experimental evaluation demonstrates that ciphertext fragmentation (8–27 pieces) results in manageable completion times of 4–10 seconds, while join operations consume only 0.005–0.03 J per cryptographic handshake event, while system-level energy consumption including network overhead is higher (~1.0–1.4 J per join cycle depending on hop count and retransmissions). Battery lifetime projections under steady-state sensing workloads range from approximately 115–280 months for low-duty-cycle operation, whereas realistic deployment conditions with periodic communication yield effective lifetimes of 11.5–24 months. Security analysis confirms robust resistance against downgrade attacks and Harvest-Now-Decrypt-Later (HNDL) threats. Moreover, EAPS reduces risk scores by over 50% compared to fixed schemes with less than 10% additional energy overhead, and batch signature verification improves scalability by increasing throughput from ~1,600 to ~2,800 verifications per second. Overall, the proposed framework demonstrates that WSNs can achieve quantum-resistant security with minimal performance trade-offs, ensuring readiness for the post-quantum era.
The emergence of quantum computing poses a significant threat to the security of blockchain protocols, primarily due to the vulnerability of current cryptographic algorithms to quantum attacks. This vulnerability jeopardizes the integrity of data and assets stored on blockchain networks, which currently hold hundreds of billions of dollars in cryptocurrencies and other digital assets. To mitigate this risk, various proposals and solutions have been presented in the literature. However, most existing proposals are either theoretical, rely on large quantum key distribution (QKD) networks, or advocate for the development of new quantumresistant blockchain networks from scratch. Despite the understanding of the quantum threat and potential solutions, practical implementations are scarce. A recent survey paper addresses this gap by proposing an end-to-end framework for achieving postquantum resistance in existing blockchain networks. The framework, outlined in the survey, is compatible with Ethereum-based networks and offers practical solutions for key generation, secure communication between nodes, and transaction verification. Notably, the framework utilizes quantum entropy for key generation, and post-quantum TLS connections, and introduces post-quantum signatures in transactions. Additionally, it incorporates on-chain verification mechanisms using Solidity smart contracts and modified EVM Opcode. This chapter represents a significant contribution to the field by providing a comprehensive overview of existing solutions and proposing a practical framework for enhancing blockchain security against quantum threats.