Atoms and photons, two things so different but yet so alike. The former, the building block of matter, something we learn about in school and imagine it as some tiny marbles encircled by other tinier marbles. The latter, an electromagnetic wave, a light particle or an excitation of the electromagnetic field. Quantum mechanics tells us about the properties of these two entities. And even if it sounds, looks and writes counter-intuitive, it has proven right for over a century now. In this work, I elaborate on how we tested the laws of quantum mechanics and how we used them learn more about the tiny building blocks of nature and the fields they use to talk to each other. The atoms we use, are artificial. Superconducting qubits, small electrical circuits with quantized energy levels behave like electrons that transition between different orbitals in an atom. One of the qubits' advantages, is also a big disadvantage. We design the circuits' energy levels and fabricate them in a cleanroom. This allows for arbitrary spaced energy levels but in contrast to real atoms, prevents two superconducting qubits from being alike. Still, this qubit platform is one of the frontrunners for future quantum computing technology and testing fundamental physics due to their scalability. We interface superconducting qubits, which operate in the GHz regime, with microwave photons. We use 3D aluminum cavities as mediators between qubits and photons. The cavities allow for non-destructive readout of the qubit state, they shield the qubits from noise at the qubit frequency and they give us an easy way to frequency-tune these joint systems. We need to operate superconducting qubits and their cavities at millikelvin temperatures in dilution refrigerators. At higher temperatures, superconductivity suffers and even worse, the environment is filled with thermal noise photons. This poses a fundamental limitation on the scalability of superconducting qubit devices. Also connecting multiple devices in different fridges does not work over room temperature links because the microwave photons used for this purpose will be covered in noise and the quantum information they carry, will be unusable. Infrared photons do not suffer from this noise problem since there are close to zero thermal noise photons at their frequencies at room temperature. We cannot simply interface superconducting devices with optical photons due their frequency mismatch and the destructive effect of optical photons on superconductors. Therefore, we use microwave-to-optics transducers that allow to convert microwave photons into optical ones and vice-versa. The transducers that we use are macroscopic electro-optic transducers using the Pockels effect in a disk-shaped Lithium Niobate whispering gallery mode resonator. By using a strong optical pump, photons from the two frequency domains experience a beam-splitter interaction and get converted from one to the other. We measure the generated optical photons using elaborate optical setups, optical heterodyning and single photon detectors to gain knowledge about the qubit state or the converted microwave photons. Bridging the microwave and the optical world allows us to take advantage of both of their strengths but it also requires deep knowledge about both of their working principles. In this work, we describe two experiments that our group conducted to showcase the opportunities that arise from interfacing superconducting qubits with optical photons but also the pitfalls, one may encounter on the way. In the first experiment, we managed to all-optically read out a superconducting qubit. We show that the assignment fidelity, the probability that a measurement of the qubit state matches the prepared state, is close to equal for all-optical, microwave-to-optics and conventional microwave readout. We show T1 and T2 measurements for all three readout types and give an analysis of the noise caused by the optics. Finally, we show that the infrared light does not affect the qubit performance in a negative way but that the heating it causes does. This is an important insight that we used in the next experiment. The second experiment is the upconversion of itinerant single microwave photons to the optical domain. We show that we can generate single microwave photons from a qubit-cavity system. We upconvert these single photons, measure them with a single photon detector and reconstruct their shape. By conducting a single photon Rabi measurement, we show correlations between the microwave and the optical domain. And by thorough signal-to-noise measurements and noise analysis, we find that we can generate single infrared photons with high signal-to-noise ratio 5.1 and low transducer added noise (<0.012 quanta). We show that this measurement creates a path towards entanglement of a superconducting qubit and an optical photon and what parameters need to be improved to achieve it. Additionally, this experiment is a proof of principle for an on-demand infrared single photon source. More generally, it allows to link microwave quantum technology in general to the optical domain.
Atoms and photons, two things so different but yet so alike. The former, the building block of matter, something we learn about in school and imagine it as some tiny marbles encircled by other tinier marbles. The latter, an electromagnetic wave, a light particle or an excitation of the electromagnetic field. Quantum mechanics tells us about the properties of these two entities. And even if it sounds, looks and writes counter-intuitive, it has proven right for over a century now. In this work, I elaborate on how we tested the laws of quantum mechanics and how we used them learn more about the tiny building blocks of nature and the fields they use to talk to each other. The atoms we use, are artificial. Superconducting qubits, small electrical circuits with quantized energy levels behave like electrons that transition between different orbitals in an atom. One of the qubits' advantages, is also a big disadvantage. We design the circuits' energy levels and fabricate them in a cleanroom. This allows for arbitrary spaced energy levels but in contrast to real atoms, prevents two superconducting qubits from being alike. Still, this qubit platform is one of the frontrunners for future quantum computing technology and testing fundamental physics due to their scalability. We interface superconducting qubits, which operate in the GHz regime, with microwave photons. We use 3D aluminum cavities as mediators between qubits and photons. The cavities allow for non-destructive readout of the qubit state, they shield the qubits from noise at the qubit frequency and they give us an easy way to frequency-tune these joint systems. We need to operate superconducting qubits and their cavities at millikelvin temperatures in dilution refrigerators. At higher temperatures, superconductivity suffers and even worse, the environment is filled with thermal noise photons. This poses a fundamental limitation on the scalability of superconducting qubit devices. Also connecting multiple devices in different fridges does not work over room temperature links because the microwave photons used for this purpose will be covered in noise and the quantum information they carry, will be unusable. Infrared photons do not suffer from this noise problem since there are close to zero thermal noise photons at their frequencies at room temperature. We cannot simply interface superconducting devices with optical photons due their frequency mismatch and the destructive effect of optical photons on superconductors. Therefore, we use microwave-to-optics transducers that allow to convert microwave photons into optical ones and vice-versa. The transducers that we use are macroscopic electro-optic transducers using the Pockels effect in a disk-shaped Lithium Niobate whispering gallery mode resonator. By using a strong optical pump, photons from the two frequency domains experience a beam-splitter interaction and get converted from one to the other. We measure the generated optical photons using elaborate optical setups, optical heterodyning and single photon detectors to gain knowledge about the qubit state or the converted microwave photons. Bridging the microwave and the optical world allows us to take advantage of both of their strengths but it also requires deep knowledge about both of their working principles. In this work, we describe two experiments that our group conducted to showcase the opportunities that arise from interfacing superconducting qubits with optical photons but also the pitfalls, one may encounter on the way. In the first experiment, we managed to all-optically read out a superconducting qubit. We show that the assignment fidelity, the probability that a measurement of the qubit state matches the prepared state, is close to equal for all-optical, microwave-to-optics and conventional microwave readout. We show T1 and T2 measurements for all three readout types and give an analysis of the noise caused by the optics. Finally, we show that the infrared light does not affect the qubit performance in a negative way but that the heating it causes does. This is an important insight that we used in the next experiment. The second experiment is the upconversion of itinerant single microwave photons to the optical domain. We show that we can generate single microwave photons from a qubit-cavity system. We upconvert these single photons, measure them with a single photon detector and reconstruct their shape. By conducting a single photon Rabi measurement, we show correlations between the microwave and the optical domain. And by thorough signal-to-noise measurements and noise analysis, we find that we can generate single infrared photons with high signal-to-noise ratio 5.1 and low transducer added noise (<0.012 quanta). We show that this measurement creates a path towards entanglement of a superconducting qubit and an optical photon and what parameters need to be improved to achieve it. Additionally, this experiment is a proof of principle for an on-demand infrared single photon source. More generally, it allows to link microwave quantum technology in general to the optical domain.
Atoms and photons, two things so different but yet so alike. The former, the building block of matter, something we learn about in school and imagine it as some tiny marbles encircled by other tinier marbles. The latter, an electromagnetic wave, a light particle or an excitation of the electromagnetic field. Quantum mechanics tells us about the properties of these two entities. And even if it sounds, looks and writes counter-intuitive, it has proven right for over a century now. In this work, I elaborate on how we tested the laws of quantum mechanics and how we used them learn more about the tiny building blocks of nature and the fields they use to talk to each other. The atoms we use, are artificial. Superconducting qubits, small electrical circuits with quantized energy levels behave like electrons that transition between different orbitals in an atom. One of the qubits' advantages, is also a big disadvantage. We design the circuits' energy levels and fabricate them in a cleanroom. This allows for arbitrary spaced energy levels but in contrast to real atoms, prevents two superconducting qubits from being alike. Still, this qubit platform is one of the frontrunners for future quantum computing technology and testing fundamental physics due to their scalability. We interface superconducting qubits, which operate in the GHz regime, with microwave photons. We use 3D aluminum cavities as mediators between qubits and photons. The cavities allow for non-destructive readout of the qubit state, they shield the qubits from noise at the qubit frequency and they give us an easy way to frequency-tune these joint systems. We need to operate superconducting qubits and their cavities at millikelvin temperatures in dilution refrigerators. At higher temperatures, superconductivity suffers and even worse, the environment is filled with thermal noise photons. This poses a fundamental limitation on the scalability of superconducting qubit devices. Also connecting multiple devices in different fridges does not work over room temperature links because the microwave photons used for this purpose will be covered in noise and the quantum information they carry, will be unusable. Infrared photons do not suffer from this noise problem since there are close to zero thermal noise photons at their frequencies at room temperature. We cannot simply interface superconducting devices with optical photons due their frequency mismatch and the destructive effect of optical photons on superconductors. Therefore, we use microwave-to-optics transducers that allow to convert microwave photons into optical ones and vice-versa. The transducers that we use are macroscopic electro-optic transducers using the Pockels effect in a disk-shaped Lithium Niobate whispering gallery mode resonator. By using a strong optical pump, photons from the two frequency domains experience a beam-splitter interaction and get converted from one to the other. We measure the generated optical photons using elaborate optical setups, optical heterodyning and single photon detectors to gain knowledge about the qubit state or the converted microwave photons. Bridging the microwave and the optical world allows us to take advantage of both of their strengths but it also requires deep knowledge about both of their working principles. In this work, we describe two experiments that our group conducted to showcase the opportunities that arise from interfacing superconducting qubits with optical photons but also the pitfalls, one may encounter on the way. In the first experiment, we managed to all-optically read out a superconducting qubit. We show that the assignment fidelity, the probability that a measurement of the qubit state matches the prepared state, is close to equal for all-optical, microwave-to-optics and conventional microwave readout. We show T1 and T2 measurements for all three readout types and give an analysis of the noise caused by the optics. Finally, we show that the infrared light does not affect the qubit performance in a negative way but that the heating it causes does. This is an important insight that we used in the next experiment. The second experiment is the upconversion of itinerant single microwave photons to the optical domain. We show that we can generate single microwave photons from a qubit-cavity system. We upconvert these single photons, measure them with a single photon detector and reconstruct their shape. By conducting a single photon Rabi measurement, we show correlations between the microwave and the optical domain. And by thorough signal-to-noise measurements and noise analysis, we find that we can generate single infrared photons with high signal-to-noise ratio 5.1 and low transducer added noise (<0.012 quanta). We show that this measurement creates a path towards entanglement of a superconducting qubit and an optical photon and what parameters need to be improved to achieve it. Additionally, this experiment is a proof of principle for an on-demand infrared single photon source. More generally, it allows to link microwave quantum technology in general to the optical domain.
"Can we do this with a new type of computer - a quantum computer?". This famous quotation of the brilliant Richard Feynman within a conference talk on "Simulating physics with computers.” is often reverently praised as the origin of the field of quantum computing. The idea was to use quantum mechanical systems itself to simulate "Nature", which is inherently quantum mechanical. Now, 43 years later, the theoretical framework of how such a computer can operate has been developed. Two main important concepts for a potential quantum supremacy, superposition and entanglement, have been exploited to design quantum algorithms to significantly speed up certain tasks. Yet, the specific hardware implementation is still far from being certain, in fact the race between the most promising platforms such as superconducting qubits, bosonic codes, cold atoms, trapped ions, optical computing as well as spin qubits has recently intensified. If one also includes the most mature applications of quantum communication technologies, secure quantum key distribution and quantum random number generators, as part of a quantum information technology ecosystem, we are confronted with a plethora of different materials, concepts, and also operation frequencies. While superconducting qubits, bosonic codes and spin qubits work in the regime of approximately 5 GHz and are controlled by electrical fields, trapped ions, cold atoms, and optical quantum computing operate with light in the infrared or visible range. Consequently, a quantum frequency converter or microwave-optic transducer is required to interface the different frequency domains or establish a long-range network connection with suitable telecom fibers. In fact, the combination of different frequency regimes is also an essential part in our classical modern communication network, where computations are performed in electrical circuits and the information exchange over longer distances happens via optical fibers. However, the specific challenges specific to building a quantum computer, also apply to the development of such a quantum frequency transducer: 1) As we deal with single excitations as the carrier of information, i.e. the smallest possible quantity, the signal can easily be corrupted by other noise sources which needs to be avoided by all means. This is also the reason why microwave quantum computers operate at temperature environments close to zero temperature (< 0.1 Kelvin) to avoid corruption by thermal noise. 2) The frequency interface generally needs to preserve the phase of the signal as an essential part of the quantum state. And 3) Quantum signals cannot be copied which would be a typical strategy to account for errors in classical computers. And finally, there is a challenge specific to microwave-optic transducers: While quantum computers are operating in one specific frequency domain, microwave-optic transducers combine microwave and optical fields in one device. This results in the particular challenge that high-energy optical radiation, which is usually well-shielded from superconducting microwave quantum processors, are now an essential part of the device. The concomitant optical radiation in the operating transducer will inevitably have a detrimental effect on the superconducting microwave components. Together with the requirement of minimal background noise for quantum-limited operation as described above, v heating from the absorption of optical photons within the same device where single microwave excitations are processed forms a formidable challenge. This thesis aims to address this challenge by developing microwave-optic transducers where the impact of optical absorption on superconducting circuits in general and superconducting qubits specifically can be mitigated. In our first approach, we developed a compact device with optimized interaction strengths between the different frequency domains. This minimizes the optical powers used for transducer operation and thus the optical absorption heating. This work was - to the best of our knowledge - the first comprehensive noise study, in an integrated microwave-optic transducer. Unfortunately, we saw that the optical absorption heating added noise way above a single excitation. Consequently, a potential quantum signal would have been buried in the noise, added by the transduction. Building on this insight, we utilized a three-dimensional microwave-optic transducer instead of an integrated device. The larger heat capacity of the macroscopic device with a size of a few millimeters can absorb a larger fraction of the optical heating before it increases the temperature of the device. This allowed us to interface the transducer directly with a superconducting qubit to readout the qubit state in a novel all-optical manner. We showed that the microwave-optic transducer can be operated in a regime in which optical fields don’t harm the sensitive qubit. This is an important prerequisite for the operation of microwave-optic transducers in conjunction with microwave quantum processors and brings the integration and seamless orchestration of different frequency components in a quantum network a step closer.
About a 100 years ago, we discovered that our universe is inherently noisy, that is, measuring any physical quantity with a precision beyond a certain point is not possible because of an omnipresent inherent noise. We call this - the quantum noise. Certain physical processes allow this quantum noise to get correlated in conjugate physical variables. These quantum correlations can be used to go beyond the potential of our inherently noisy universe and obtain a quantum advantage over the classical applications. Quantum noise being inherent also means that, at the fundamental level, the physical quantities are not well defined and therefore, objects can stay in multiple states at the same time. For example, the position of a particle not being well defined means that the particle is in multiple positions at the same time. About 4 decades ago, we started exploring the possibility of using objects which can be in multiple states at the same time to increase the dimensionality in computation. Thus, the field of quantum computing was born. We discovered that using quantum entanglement, a property closely related to quantum correlations, can be used to speed up computation of certain problems, such as factorisation of large numbers, faster than any known classical algorithm. Thus began the pursuit to make quantum computers a reality. Till date, we have explored quantum control over many physical systems including photons, spins, atoms, ions and even simple circuits made up of superconducting material. However, there persists one ubiquitous theme. The more readily a system interacts with an external field or matter, the more easily we can control it. But this also means that such a system can easily interact with a noisy environment and quickly lose its coherence. Consequently, such systems like electron spins need to be protected from the environment to ensure the longevity of their coherence. Other systems like nuclear spins are naturally protected as they do not interact easily with the environment. But, due to the same reason, it is harder to interact with such systems. After decades of experimentation with various systems, we are convinced that no one type of quantum system would be the best for all the quantum applications. We would need hybrid systems which are all interconnected - much like the current internet where all sorts of devices can all talk to each other - but now for quantum devices. A quantum internet. Optical photons are the best contenders to carry information for the quantum internet. They can carry quantum information cheaply and without much loss - the same reasons which has made them the backbone of our current internet. Following this direction, many systems, like trapped ions, have already demonstrated successful quantum links over a large distances using optical photons. However, some of the most promising contenders for quantum computing which are based on microwave frequencies have been left behind. This is because high energy optical photons can adversely affect fragile low-energy microwave systems. In this thesis, we present substantial progress on this missing quantum link between microwave and optics using electrooptical nonlinearities in lithium niobate. The nonlinearities are enhanced by using resonant cavities for all the involved modes leading to observation of strong direct coupling between optical and microwave frequencies. With this strong coupling we are not only able to achieve almost 100\% internal conversion efficiency with low added noise, thus presenting a quantum-enabled transducer, but also we are able to observe novel effects such as cooling of a microwave mode using optics. The strong coupling regime also leads to direct observation of dynamical backaction effect between microwave and optical frequencies which are studied in detail here. Finally, we also report first observation of microwave-optics entanglement in form of two-mode squeezed vacuum squeezed 0.7dB below vacuum level. With this new bridge between microwave and optics, the microwave-based quantum technologies can finally be a part of a quantum network which is based on optical photons - putting us one step closer to a future with quantum internet.
About a 100 years ago, we discovered that our universe is inherently noisy, that is, measuring any physical quantity with a precision beyond a certain point is not possible because of an omnipresent inherent noise. We call this - the quantum noise. Certain physical processes allow this quantum noise to get correlated in conjugate physical variables. These quantum correlations can be used to go beyond the potential of our inherently noisy universe and obtain a quantum advantage over the classical applications. Quantum noise being inherent also means that, at the fundamental level, the physical quantities are not well defined and therefore, objects can stay in multiple states at the same time. For example, the position of a particle not being well defined means that the particle is in multiple positions at the same time. About 4 decades ago, we started exploring the possibility of using objects which can be in multiple states at the same time to increase the dimensionality in computation. Thus, the field of quantum computing was born. We discovered that using quantum entanglement, a property closely related to quantum correlations, can be used to speed up computation of certain problems, such as factorisation of large numbers, faster than any known classical algorithm. Thus began the pursuit to make quantum computers a reality. Till date, we have explored quantum control over many physical systems including photons, spins, atoms, ions and even simple circuits made up of superconducting material. However, there persists one ubiquitous theme. The more readily a system interacts with an external field or matter, the more easily we can control it. But this also means that such a system can easily interact with a noisy environment and quickly lose its coherence. Consequently, such systems like electron spins need to be protected from the environment to ensure the longevity of their coherence. Other systems like nuclear spins are naturally protected as they do not interact easily with the environment. But, due to the same reason, it is harder to interact with such systems. After decades of experimentation with various systems, we are convinced that no one type of quantum system would be the best for all the quantum applications. We would need hybrid systems which are all interconnected - much like the current internet where all sorts of devices can all talk to each other - but now for quantum devices. A quantum internet. Optical photons are the best contenders to carry information for the quantum internet. They can carry quantum information cheaply and without much loss - the same reasons which has made them the backbone of our current internet. Following this direction, many systems, like trapped ions, have already demonstrated successful quantum links over a large distances using optical photons. However, some of the most promising contenders for quantum computing which are based on microwave frequencies have been left behind. This is because high energy optical photons can adversely affect fragile low-energy microwave systems. In this thesis, we present substantial progress on this missing quantum link between microwave and optics using electrooptical nonlinearities in lithium niobate. The nonlinearities are enhanced by using resonant cavities for all the involved modes leading to observation of strong direct coupling between optical and microwave frequencies. With this strong coupling we are not only able to achieve almost 100\% internal conversion efficiency with low added noise, thus presenting a quantum-enabled transducer, but also we are able to observe novel effects such as cooling of a microwave mode using optics. The strong coupling regime also leads to direct observation of dynamical backaction effect between microwave and optical frequencies which are studied in detail here. Finally, we also report first observation of microwave-optics entanglement in form of two-mode squeezed vacuum squeezed 0.7dB below vacuum level. With this new bridge between microwave and optics, the microwave-based quantum technologies can finally be a part of a quantum network which is based on optical photons - putting us one step closer to a future with quantum internet.
Superconducting qubits are fabricated "loss-free" electrical circuits on a chip with size features of tens of nanometers. If cooled to cryogenic temperatures below -273 °C they behave as quantum elements, similar to atoms and molecules. Such a qubit can be manipulated by fast-oscillating magnetic fields and its resulting quantum state can be measured using a proper magnetic detector. These qubits could be the basic elements for a quantum processor. To that order, multiple qubits have to controllably interact, and to that purpose very high quality resonators are fabricated on the same chip. Effectively the interaction results from the phase-coherent exchange of a single photon between qubit and resonator. In this way it is highly analogous to the so-called cavity QED in atomic physics where single atoms couple to a single trapped photon, all inside a cavity resonator. In this thesis, a superconducting flux qubit has been coupled to an LC resonator and coherent exchange of a single photon between qubit and resonator has been achieved. A striking option in these superconducting circuits, not attainable in "common" atomic cavity-QED, is that the interaction between qubit and photon can be made very large, up to the limit that one no longer can talk about the qubit and resonator as such. This limit requires a fully different description and it leads to novel effects, e.g. in the energy spectrum of the qubit-resonator composite. The Bloch-Siegert spectral shift is experimentally demonstrated in this thesis. As a small but critical technical aside a new type of control line filter has been developed, which allows strong suppression of excess electrical noise that forms a threat for qubit coherence. Having two modes of operation, it shorts all low-frequency noise if control is idle while being transparent if control is active, where short or open is determined by the control line signal level itself.
Artificially engineered atoms, built using superconducting electrical circuits, have had a broad impact on the field of quantum information and quantum computing. Based on the Josephson effect, superconducting qubits have provided a robust platform for engineering light-matter interactions at the single-photon level. The ability to precisely control and manipulate single photons using superconducting qubits and cavities, a field now popularly known as circuit quantum electrodynamics (circuit QED), has enabled new and novel regimes in quantum physics, which previously remained inaccessible. For instance, the coupling between individual photons and artificial atoms have been shown to reach the ultrastrong and deep-strong regimes, a feat which is difficult to achieve with natural atoms. The superconducting circuit platform is now a promising contender for building large-scale quantum processors, attracting large investments from academic, industry and government players. \n \nThis thesis uses superconducting circuits to engineer photon interactions in two separate studies. The first is aimed at studying the physics of ``giant" artificial-atoms. The second study explores the route towards building a quantum heat engine using two parametrically-coupled, superconducting microwave cavities. We review the theoretical ideas and concepts which motivate our work, along with discussions of the design methodology, simulations, fabrication, measurement setup and the experimental findings. \n \nIn the first study, we explore a giant artificial atom, formed from a transmon qubit, which is coupled to propagating microwaves at multiple points along an open transmission line. The multipoint coupling nature of the transmon allows its radiated field to interfere with itself leading to some striking ``giant" atom effects. For instance, we observe strong frequency dependent couplings of the transmon's transition levels to its electromagnetic environment, a feature which is not observed with ordinary artificial atoms. We measure large on/off ratios, as high as 380, for the coupling rate of the ket0−ket1 transition. Furthermore, we show that we can enhance or suppress the coupling rate of the ket1−ket2 transition relative to the ket0−ket1 transition, by more than a factor of 200. The relative modulation of the coupling rates was exploited to engineer a metastable state in the giant transmon and demonstrate electromagnetically-induced transparency (EIT), a typical signature of a lambda system. Our results show that we can transform the ladder structure of an ordinary transmon into a more interesting lambda system using a giant transmon, thereby paving the way for exploring new possibilities to study three-level physics in a waveguide-QED setting. \n \nExtending giant atom physics to multiple giant atoms, we then explore a device with two giant artificial atoms connected in a braided configuration to a transmission line. The braided topology of the qubits, offers an interesting regime where the qubits can interact with each other in a decoherence-free environment, where the interaction is mediated by virtual photons in the transmission line. We probe the resonant behavior of the qubits at two different frequency bias points, where we observe qualitatively different scattering behavior. Furthermore, when probing for the Autler-Townes Splitting (ATS), multiple resonances are observed for both resonant and off-resonant cases instead of the familiar doublet in the ATS spectroscopy. This comes as a surprise as the frequency-level spacings in both qubits are nominally identical. We believe these features could be an indication of a novel resonant interaction between the qubits facilitated by the braided topology. An effort to understand this theoretically is underway. \n \nFor our second study, we explore a system with two parametrically-coupled superconducting resonators, which implements an optomechanical-like interaction in an all-electrical network. The nonlinear nature of this interaction is mediated by a superconducting quantum interference device (SQUID), where the current in one resonator couples to the photon number in the other resonator. We propose to use this system to build a ``photonic piston" engine in the quantum regime. We motivate the feasibility of the proposal by reviewing key theoretical results which demonstrate an Otto-cycle by appropriately driving the system with noise. Our experimental findings demonstrate the crucial nonlinear coupling that is required for the engine to work. We also show that we can increase the coupling strength between the resonators depending on the chosen flux operating point.