Neutral atom arrays have emerged as one of the leading platforms for quantum computation and simulation. Integrating these arrays with photonic interfaces, such as optical cavities, enables high-speed qubit readout, efficient atom-photon entanglement, and novel quantum simulation capabilities through long-range interactions. However, achieving scalable and efficient integration of atom arrays with photonic structures remains a significant challenge. In this work, we present an atom-array cavity-array platform that integrates cesium atom arrays with a photonic chip containing over 100 nanophotonic cavities. This platform inherently supports multiplexing by allowing simultaneous interactions between multiple atoms and multiple cavities, a crucial capability for scaling up quantum information processing and networking. To enable this integration, we develop three key techniques: (1) a backgroundfree imaging scheme utilizing excited-state transitions in cesium with fidelity exceeding 99%, (2) a photonic chip design optimized for efficient atom loading, and (3) a free-space coupling scheme achieving over 65% waveguide-to-fiber coupling efficiency. We demonstrate collisional blockade-limited loading of atom arrays near the photonic chip, parallel transport of atoms to multiple cavities, a key capability that enables the multiplexing required in quantum networks and distributed quantum computing. Finally, we show an array of resonant telecom cavities, and multiple theoretical architectures to make use of these to distribute entanglement across hundreds of kilometers. These results address critical challenges in atom-photon integration and pave the way for scalable quantum information processing.
Neutral atom arrays have emerged as one of the leading platforms for quantum computation and simulation. Integrating these arrays with photonic interfaces, such as optical cavities, enables high-speed qubit readout, efficient atom-photon entanglement, and novel quantum simulation capabilities through long-range interactions. However, achieving scalable and efficient integration of atom arrays with photonic structures remains a significant challenge. In this work, we present an atom-array cavity-array platform that integrates cesium atom arrays with a photonic chip containing over 100 nanophotonic cavities. This platform inherently supports multiplexing by allowing simultaneous interactions between multiple atoms and multiple cavities, a crucial capability for scaling up quantum information processing and networking. To enable this integration, we develop three key techniques: (1) a backgroundfree imaging scheme utilizing excited-state transitions in cesium with fidelity exceeding 99%, (2) a photonic chip design optimized for efficient atom loading, and (3) a free-space coupling scheme achieving over 65% waveguide-to-fiber coupling efficiency. We demonstrate collisional blockade-limited loading of atom arrays near the photonic chip, parallel transport of atoms to multiple cavities, a key capability that enables the multiplexing required in quantum networks and distributed quantum computing. Finally, we show an array of resonant telecom cavities, and multiple theoretical architectures to make use of these to distribute entanglement across hundreds of kilometers. These results address critical challenges in atom-photon integration and pave the way for scalable quantum information processing.
Arrays of neutral atoms trapped in optical tweezers have emerged as a leading platform for quantum information processing and quantum simulation due to their scalability, reconfigurable connectivity, and high-fidelity operations. Individual atoms are promising candidates for quantum networking due to their capability to emit indistinguishable photons that are entangled with their internal atomic states. Integrating atom arrays with photonic interfaces would enable distributed architectures in which nodes hosting many processing qubits could be efficiently linked together via the distribution of remote entanglement. However, many atom array techniques cease to work in close proximity to photonic interfaces, with atom detection via standard fluorescence imaging presenting a major challenge due to scattering from nearby photonic devices. Here, we demonstrate an architecture that combines atom arrays with up to 64 optical tweezers and a millimeter-scale photonic chip hosting more than 100 nanophotonic cavities. We achieve high-fidelity ( ~ 99.2%), background-free imaging in close proximity to nanofabricated cavities using a multichromatic excitation and detection scheme. The atoms can be imaged while trapped a few hundred nanometers above the dielectric surface, which we verify using Stark shift measurements of the modified trapping potential. Finally, we rearrange atoms into defect-free arrays and load them simultaneously onto the same or multiple devices.
Neutral atom arrays provide a versatile platform for quantum information processing. However, in large-scale arrays, efficient photon collection remains a bottleneck for key tasks such as fast, non-destructive qubit readout and remote entanglement distribution. We propose a cavity-based approach that enables fast, parallel operations over many atoms using multiple modes of a single optical cavity. By selectively shifting the relevant atomic transitions, each atom can be coupled to a distinct cavity mode, allowing independent simultaneous processing. We present practical system designs that support cavity-mode multiplexing with up to 50 modes, enabling rapid mid-circuit syndrome extraction and significantly enhancing entanglement distribution rates between remote atom arrays. This approach offers a scalable solution to core challenges in neutral atom arrays, advancing the development of practical quantum technologies.
Scalable quantum computers and quantum networks require the combination of quantum processing nodes with efficient light-matter interfaces to distribute quantum information in local or long-distance quantum networks. Neutral-atom arrays have both been coupled to Rydberg states to enable high-fidelity quantum gates in universal processing architectures, and to optical cavities to realize interfaces to photons. However, combining these two capabilities and coupling atom arrays to highly excited Rydberg states in the mode of an optical cavity has been an outstanding challenge. Here we present a novel cavity-coupled Rydberg array that achieves this long-standing goal. We prepare, detect, and control individual atoms in a scalable optical tweezer array, couple them strongly to the optical mode of a high-finesse optical cavity and excite them in a controlled way to Rydberg states. We show that high-cooperativity coupling to an optical cavity -- demonstrated via the dispersive shift of the resonance of the cavity in presence of the atoms -- and strong Rydberg interactions -- demonstrated via the collective enhancement of Rydberg coupling in the atomic array -- can be achieved in our setup at the same spatial location. Our presented experimental platform opens the path to several new directions, including the realization of quantum network nodes, quantum simulation of long-range interacting, open quantum systems and photonic-state engineering leveraging high-fidelity Rydberg control.
As quantum computers advance toward larger, more powerful systems, scaling beyond a single quantum processing unit (QPU) will require the development of fast, high-fidelity interconnections between QPUs. One of the most promising strategies for achieving this is coupling qubits to optical cavities. Strong atom-cavity interactions enable the generation of atom-photon entanglement at rates orders of magnitude faster than alternative approaches, offering a critical advantage for scalable architectures. This thesis investigates the use of nanophotonic and microscale cavities to achieve exceptional atom-photon coupling while maintaining compatibility with state-of-the-art neutral atom QPUs. The experiments presented in this thesis demonstrate coherent transport between a free-space atom array and an optical cavity, coherent Rydberg excitations and interactions in the presence of the cavity interface, fast high-fidelity readout and cavity-mediated operations, and novel fabrication techniques for improved microcavities that further enhance system performance. Together, these advances outline a pathway toward utility-scale quantum computing.
Neutral atom arrays have rapidly emerged as a leading platform for quantum computing, boasting scalable, configurable arrays of single atoms trapped in optical tweezers, fast, high-fidelity entangling gates through Rydberg interactions, and programmable, parallelized control of qubit operations. Coupling an atom array to an optical cavity opens a new frontier. Leveraging enhanced light-atom interactions in cavity quantum electrodynamics, cavity- coupled atom arrays acquire capabilities that can further expand the neutral atom toolbox, including cavity-enhanced atom readouts, atom-photon entanglement, and photon-mediated interactions between distant atoms. This thesis presents a quantum hardware platform that integrates an array of neutral atoms with a high-finesse optical cavity. After describing the design and development of the experimental apparatus, I demonstrate high-fidelity atom state readout through the cavity, achieving improved speed and atom survival compared to conventional free-space imaging methods. I then introduce a new technique for selectively controlling atom-cavity coupling on arbitrary subsets of the array, using local AC Stark shifts on the excited states of the atoms. Building on these tools, I demonstrate fast, non-destructive cavity-based readout of atom arrays, a crucial bottleneck of atom array platforms. I also showcase real-time measurement and feedback capabilities with a demonstration of classical error correction, using a register of atomic bits. Finally, I describe progress toward implementing single- and two-qubit gates within the cavity-coupled system. By combining coherent control, tunable interactions, and high-fidelity, non-destructive readout integrated and real-time feedback, the cavity-coupled Rydberg atom array offers a promising path toward fault-tolerant quantum computing.
Neutral atoms are among the leading platforms toward realizing fault-tolerant quantum computation (FTQC). However, scaling up a single neutral-atom device beyond 10 4 atoms to meet the demands of FTQC for practical applications remains a challenge. To overcome this challenge, we clarify the criteria and technological requirements for further scaling based on multiple neutral atom quantum processing units (QPUs) connected through photonic networking links. Our quantitative analysis shows that nanofiber optical cavities have the potential as an efficient atom-photon interface to enable fast entanglement generation between atoms in distinct neutral-atom modules, allowing multiple neutral-atom QPUs to operate cooperatively without sacrificing computational speed. Using state-of-the-art millimeter-scale nanofiber cavities with the finesse of thousands, over a hundred atoms can be coupled to the cavity mode with an optical tweezer array, with expected single-atom cooperativity exceeding 100 for telecom-band transition of ytterbium atoms. This enables efficient time-multiplexed entanglement generation with a predicted Bell-pair generation rate of 10 5 s − 1 while maintaining a small footprint for channel multiplexing. These proposals and results indicate a promising pathway for building large-scale multiprocessor fault-tolerant quantum computers using neutral atoms, nanofiber optical cavities, and fiber-optic networks.