Abstract The ability to locally control and measure subsets of ancilla qubits in an efficient and crosstalk-free manner is a key ingredient in quantum error correction (QEC). Dual-species neutral atom arrays offer an ideal implementation of these capabilities, enabling independent state preparation, manipulation, and detection on each species. In this work, we realize such a dual-species Rydberg array of Na and Cs atoms trapped in co-localized 2D optical tweezer arrays, using Na as an ancilla to measure stabilizers of surrounding Cs data qubits. We identify the finite interspecies Rydberg-Rydberg interaction strength as a practical obstacle to high-fidelity multi-body entanglement and show that, by tuning the Rabi frequency and the detuning of the Rydberg driving field, the resulting geometric phase error can be compensated. This yields a protocol for simultaneous, non-destructive, in-situ stabilizer readout of multiple data qubits via global pulses alone. Using this protocol, we demonstrate non-destructive measurement of Pauli-Z stabilizers on four-qubit Cs plaquettes via a single global Rydberg pulse sequence. Our results demonstrate dual-species tweezer arrays as a promising route towards scalable QEC and open the door to new quantum control protocols leveraging both interspecies and intraspecies interactions.
Abstract The ability to locally control and measure subsets of ancilla qubits in an efficient and crosstalk-free manner is a key ingredient in quantum error correction (QEC). Dual-species neutral atom arrays offer an ideal implementation of these capabilities, enabling independent state preparation, manipulation, and detection on each species. In this work, we realize such a dual-species Rydberg array of Na and Cs atoms trapped in co-localized 2D optical tweezer arrays, using Na as an ancilla to measure stabilizers of surrounding Cs data qubits. We identify the finite interspecies Rydberg-Rydberg interaction strength as a practical obstacle to high-fidelity multi-body entanglement and show that, by tuning the Rabi frequency and the detuning of the Rydberg driving field, the resulting geometric phase error can be compensated. This yields a protocol for simultaneous, non-destructive, in-situ stabilizer readout of multiple data qubits via global pulses alone. Using this protocol, we demonstrate non-destructive measurement of Pauli-Z stabilizers on four-qubit Cs plaquettes via a single global Rydberg pulse sequence. Our results demonstrate dual-species tweezer arrays as a promising route towards scalable QEC and open the door to new quantum control protocols leveraging both interspecies and intraspecies interactions.
The ability to locally control and measure subsets of ancilla qubits in an efficient and crosstalk-free manner is a key ingredient in quantum error correction (QEC). Dual-species neutral atom arrays offer an ideal implementation of these capabilities, enabling independent state preparation, manipulation, and detection on each species. In this work, we realize such a dual-species Rydberg array of Na and Cs atoms trapped in co-localized 2D optical tweezer arrays, using Na as an ancilla to measure stabilizers of surrounding Cs data qubits. We identify the finite interspecies Rydberg-Rydberg interaction strength as a practical obstacle to high-fidelity multi-body entanglement and show that, by tuning the Rabi frequency and the detuning of the Rydberg driving field, the resulting geometric phase error can be compensated. This yields a protocol for simultaneous, non-destructive, in situ stabilizer readout of multiple data qubits via global pulses alone. Using this protocol, we demonstrate non-destructive measurement of Pauli-Z stabilizers on four-qubit Cs plaquettes via a single global Rydberg pulse sequence. Our results demonstrate dual-species tweezer arrays as a promising route towards scalable QEC and open the door to new quantum control protocols leveraging both interspecies and intraspecies interactions.
Optical tweezer arrays of neutral atoms have emerged as a versatile platform for analog quantum simulation and digital quantum computation, combining scalability, reconfigurable geometry, and flexible microscopic control. In the first part of this work, we develop a 133Cs Rydberg simulator and demonstrate coherent Rydberg excitation in a rearrangeable array of more than 100 atoms. We then use this platform to probe critical many-body physics, extracting the scaling dimensions of the Ising universality class from an adiabatically prepared critical state. Dual-species arrays extend these capabilities by introducing spectroscopic selectivity and independently tunable interspecies interactions. Motivated by these opportunities, we develop a dual-species Rydberg array of 23Na and 133Cs atoms. The large separation between the optical transitions of the two species allows qubits encoded in one species to be cooled, trapped, imaged, and excited while the other species remains largely undisturbed. At the same time, strong van der Waals interactions provide a programmable coupling between the two arrays. We use this platform to demonstrate a proof-of-principle multi-qubit stabilizer readout based on an interaction-compensated protocol. In this setting, spectroscopic separation becomes an architectural advantage: it enables in-situ ancilla control and readout without requiring atom transport between separate interaction and measurement zones. Consequently, a multi-qubit entangling operation that would otherwise be decomposed into a sequence of two-qubit gates can be implemented as a native, effectively constant-depth primitive. These results point toward faster and more scalable syndrome extraction in neutral-atom quantum error correction, and establish dual-species Rydberg arrays as a promising architecture connecting programmable quantum simulation with fault-tolerant quantum computation.
The central prerequisite of any fault-tolerant quantum architecture is a quantum memory: a block of encoded physical qubits whose logical state is actively preserved against noise across many rounds of error correction. In neutral-atom Rydberg arrays, realizing such a memory is obstructed not by the entangling gates themselves, which are already fast and high-fidelity, but by the auxiliary operations that a conventional error-correction cycle requires: mid-circuit fluorescence measurement, inter-zone atom transport, and locally focused single-qubit addressing. Each of these introduces latency, atom loss, or optical crosstalk that exceeds the cost of the underlying gates by orders of magnitude. These costs accumulate cycle after cycle, progressively degrading the very logical information the code is meant to protect. Here we propose a protocol that stabilizes a toric-code quantum memory without moving, measuring or local addressing atoms. The key is to use a three-species Rydberg atom array for the complete stabilizer cycle, including syndrome extraction, coherent correction, and ancilla reset, under global, species-selective laser pulses. Numerical simulation of a 4×4 rotated toric code shows a longer qubit lifetime when the physical error rate is below a pseudo-threshold p⋆≈0.034. The scheme offers a concrete, hardware-efficient route to topological quantum memory in neutral-atom platforms.
This dataset contains the experimental and numerical data supporting the publication “Multi-Qubit Stabilizer Readout on a Dual-Species Rydberg Array”. The data were obtained with a dual-species Rydberg array of Na and Cs atoms. We demonstrate non-destructive measurement of Pauli-Z stabilizers on four-qubit Cs plaquettes via a single global Rydberg pulse sequence. The repository includes processed data files for the key figures in the main text and supplementary materials, together with descriptions that allow reproduction of the plots and numerical comparisons presented in the paper. Raw atom logicals datasets are available from the authors upon reasonable request.
Over the past decade, quantum information science has progressed from few-qubit demonstrations to experiments with hundreds of qubits. Neutral atom processors based on individual atoms trapped in arrays of optical tweezers have emerged as a leading candidate due to their inherent scalability and flexible connectivity. Advanced protocols like measurement-based state preparation and quantum error correction, however, require efficient crosstalk-free mid-circuit operations for the readout, reset, and replenishment of a subset of qubits. In typical single-species atom arrays, where all atoms are identical and on-resonance, such operations necessitate complex overheads from single-site addressing, coherent transport, or shielding techniques, to mitigate the qubit decoherence induced from photons scattered by neighboring atoms. To address this challenge of engineering scalable quantum architectures compatible with efficient control techniques, we introduce and implement the first dual-species atom array platform, and explore new dynamics inaccessible in single-species arrays. In this approach, two atomic species are addressed independently due to the spectral separation between their control wavelengths. We engineer two-dimensional arrays from individual rubidium (Rb) and cesium (Cs) atoms in up to 512 optical tweezers, and show that the two species can be independently trapped, cooled, and imaged with state-of-the-art performance metrics. Harnessing this intrinsic crosstalk-free control, we establish the key primitives of mid-circuit readout, real-time processing and feed-forward, and coherent mid-circuit reloading. By integrating these capabilities, we realize in-sequence, real-time correction of correlated phase errors via a spectator qubit protocol. Next, we excite atoms to Rydberg states in the Förster regime, accessing hitherto unobserved enhanced interspecies Rydberg interactions, and program them to implement the first interspecies CNOT gate. We combine this multispecies entanglement with mid-circuit readout to achieve quantum non-demolition measurement of a Rb-qubit using an auxiliary Cs-qubit, circumventing physical qubit transport. Finally, leveraging the two qubit modalities, we present the first experimental demonstration of quantum cellular automata in atom arrays using only global addressing, and prepare a 17-qubit Cs cluster state with Rb-mediated interactions. The dual-species platform and techniques established in this thesis pave the way toward measurement-based algorithms and real-time feedback control in large-scale quantum systems.
Large-scale Rydberg atom arrays are used for highly coherent analogue quantum simulations and for digital quantum computations. However, advanced quantum protocols, such as quantum error correction, require midcircuit qubit operations, including the replenishment, reset and read-out of a subset of qubits. A compelling strategy for unlocking these capabilities is a dual-species architecture in which a second atomic species is controlled independently and entangled with the first through Rydberg interactions. Here, we realize a dual-species Rydberg array consisting of rubidium and caesium atoms and explore regimes of interactions and dynamics not accessible in single-species architectures. We achieve enhanced interspecies interactions by electrically tuning the Rydberg states close to a Förster resonance. In this regime, we demonstrate an interspecies Rydberg blockade and implement a quantum state transfer from one species to another. We then generate a Bell state between Rb and Cs hyperfine qubits through an interspecies controlled-phase gate. Finally, we combine interspecies entanglement with a native midcircuit read-out to achieve quantum non-demolition measurements. Rydberg atoms in optical tweezers are a promising platform for quantum information science. A platform composed of dual-species Rydberg arrays has been realized, offering access to unexplored interaction regimes and crosstalk-free midcircuit control.