Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Photonics for Quantum (PfQ)

Technology development for hybrid quantum inertial sensing in space

Dennis Knoop, Isabel Alejandra Parga García, Marian Woltmann, Sven Herrmann, Jens Große

Published Jun 8, 2026• 0 citations
Publisher

Abstract

Hybrid quantum inertial sensing is a strategy combining the absolute but slow measurement of acceleration possible with atom interferometry and the relative but fast measurement of classical inertial measurement units (IMU). By combining both technologies within a sensor fusion framework, their respective strengths can be exploited, paving the way to enable high performance inertial navigation for different application scenarios. This paper gives an overview of our design activities of a three axes hybrid quantum inertial sensor and a planned flight campaign including hyper- and micro-gravity on the Bremen GraviTower. Furthermore, our design efforts for a next generation sensor system, foreseen to be operated in space are described.

DOI
10.1117/12.3111897

Related papers

Cold Atom Sensors in Space Applications: A Global Scenario

Hriday Dath, V N Radhika, A R Rekha +2 more

In recent years, quantum technology has attracted attention in inertial navigation, especially due to its extreme sensitivity to inertial forces and strong immunity to drifts, which plague conventional sensors. There are multiple groups around the world working on cold atom interferometry aiming to develop high sensitive inertial sensors for very high accuracy autonomous navigation. Recent advancements in micro-fabrication technologies have helped in development of robust and miniaturized atom interferometry based high performance inertial systems. These, in future, will pave way for autonomous satellite inertial navigation sensors based on cold atoms. Here we discuss the achievements towards realizing cold atom inertial sensors and their indomitable role as inertial sensors for future satellites. A detailed survey on the initiatives taken by different space agencies, their achievements and their plans to explore its potential in space are also discussed.

•Apr 7, 2021•0 citations

Developments for quantum inertial navigation systems employing Bose–Einstein condensates

Matthias Gersemann, Ashwin Rajagopalan, M. Abidi +19 more

Quantum technology became a new tool for navigation based on measuring accelerations and rotations. However, the full potential of atom interferometers that operate with ultracold atoms has not yet been exploited. This paper presents current developments in the field of generation and application of Bose–Einstein condensates for inertial navigation. It covers the advancements in the form of atom chip and compact vacuum technology, classical sensor hybridization, and a multi-axis atom interferometry technique. In addition, the synergies of combining quantum sensors with classical inertial measurement units and their implications for navigation trajectories are discussed.

Applied Physics Reviews•Jul 1, 2025•12 citations

Progress towards the development of a cold-atom inertial measurement unit for onboard applications

Jeanne Bernard, Malo Cadoret, Yannick Bidel +6 more

In this paper we present our progress towards the development of a complete cold-atom Inertial Measurement Unit (IMU). Our goal is to have a single atomic sensor that will alternatively measure each inertial component (3 accelerations and 3 rotations). Every atomic measurement will be hybridized with a set of classical inertial sensors. Hybridization enables to combine the advantages of both technologies and to provide accurate continuous measurements with high dynamic range, in the scope of onboard inertial navigation compatibility.

IEEE International Symposium on Inertial Sensors and Systems (INERTIAL)•May 8, 2022•4 citations

Vectorial quantum sensors

Philippe Bouyer

Inertial sensors based on cold atoms and light-pulse interferometry exhibit state-of-the-art sensitivity and ultra-low measurement bias that could revolutionize a variety of fields including geophysics and seismology, gravitational wave detection and fundamental tests of gravity, and inertial navigation. In the latter case, cold-atom interferometers are widely considered as breakthrough technology for future autonomous INSs. Nowadays, absolute quantum inertial sensors are available as commercial and field-deployable devices. Yet, their current size and complexity has not yet reached a technology readiness level compatible with mobile applications or plug-and-play operation by non-specialists. These systems are in desperate need of further development and miniaturization. We will present progress beyond these first experiments while exploring new methods relying on 3D matter-wave manipulation that can lead to interferometer geometries that are simultaneously sensitive to accelerations and rotations in 3D and can discern their vector components within a single measurement. These novel innovations produce additional sensitivity to rotations and gravity gradients which has not yet been exploited experimentally and could be a game changing innovation for future atomic sensors. The ability to measure the full acceleration and rotation vectors with a compact, high-precision, low-bias inertial sensor could strongly impact the fields of inertial navigation, gravity gradiometry, and gyroscopy.

Optical and Quantum Sensing and Precision Metrology II•Mar 9, 2022•0 citations

Hybrid Inertial sensors – future prospects of inertial sensors based on atom interferometry fused with opto-mechanical accelerometers

M. Warner, Jens Große, Lisa Wörner +6 more

Positioning currently relies heavily on Global Navigation Satellite Systems (GNSS). Combined with classical accelerometers and gyroscopes, precise determination of orientation and position at any given time become available. However, but the availability of GNSS (e.g. GPS) is limited and not guaranteed at all times.In this paper we present an alternative based on atom interferometry using cold atom ensembles. An inertial sensor based on cold atoms allows, in theory, for nearly drift-free measurements of inertial forces with accuracies unreached by classical sensors, but the technology is still locked away in large physics laboratories [1].This paper introduces a compact device called SECAMP, which is capable of cooling atoms down to μ-Kelvin. SECAMP has the potential to measure inertial acceleration in three degrees of freedom. In the following, we present the current experimental setup of the apparatus and outline the next steps for the inertial sensor.

DGON Inertial Sensors and Systems (ISS)•Sep 1, 2019•1 citation

Tracking the vector acceleration with a hybrid quantum accelerometer triad

Simon Templier, P. Cheiney, Quentin d’Armagnac de Castanet +6 more

Robust and accurate acceleration tracking remains a challenge in many fields. For geophysics and economic geology, precise gravity mapping requires onboard sensors combined with accurate positioning and navigation systems. Cold atom–based quantum inertial sensors can potentially provide these high-precision instruments. However, current scalar instruments require precise alignment with vector quantities. Here, we present the first hybrid three-axis accelerometer exploiting the quantum advantage to measure the full acceleration vector by combining three orthogonal atom interferometer measurements with a classical navigation-grade accelerometer triad. Its ultralow bias permits tracking the acceleration vector over long time scales, yielding a 50-fold improvement in stability (6 × 10 −8 g ) over our classical accelerometers. We record the acceleration vector at a high data rate (1 kHz), with absolute magnitude accuracy below 10 μ g , and pointing accuracy of 4 μrad. This paves the way toward future strapdown applications with quantum sensors and highlights their potential as future inertial navigation units.

arXiv:2209.13209•Science Advances•Nov 9, 2022•73 citations
Hybrid quantum inertial sensing is a strategy combining the absolute but slow measurement of acceleration possible with atom interferometry and the relative but fast measurement of classical inertial measurement units (IMU). By combining both technologies within a sensor fusion framework, their respective strengths can be exploited, paving the way to enable high performance inertial navigation for different application scenarios. This paper gives an overview of our design activities of a three axes hybrid quantum inertial sensor and a planned flight campaign including hyper- and micro-gravity on the Bremen GraviTower. Furthermore, our design efforts for a next generation sensor system, foreseen to be operated in space are described.
In recent years, quantum technology has attracted attention in inertial navigation, especially due to its extreme sensitivity to inertial forces and strong immunity to drifts, which plague conventional sensors. There are multiple groups around the world working on cold atom interferometry aiming to develop high sensitive inertial sensors for very high accuracy autonomous navigation. Recent advancements in micro-fabrication technologies have helped in development of robust and miniaturized atom interferometry based high performance inertial systems. These, in future, will pave way for autonomous satellite inertial navigation sensors based on cold atoms. Here we discuss the achievements towards realizing cold atom inertial sensors and their indomitable role as inertial sensors for future satellites. A detailed survey on the initiatives taken by different space agencies, their achievements and their plans to explore its potential in space are also discussed.
Quantum technology became a new tool for navigation based on measuring accelerations and rotations. However, the full potential of atom interferometers that operate with ultracold atoms has not yet been exploited. This paper presents current developments in the field of generation and application of Bose–Einstein condensates for inertial navigation. It covers the advancements in the form of atom chip and compact vacuum technology, classical sensor hybridization, and a multi-axis atom interferometry technique. In addition, the synergies of combining quantum sensors with classical inertial measurement units and their implications for navigation trajectories are discussed.
In this paper we present our progress towards the development of a complete cold-atom Inertial Measurement Unit (IMU). Our goal is to have a single atomic sensor that will alternatively measure each inertial component (3 accelerations and 3 rotations). Every atomic measurement will be hybridized with a set of classical inertial sensors. Hybridization enables to combine the advantages of both technologies and to provide accurate continuous measurements with high dynamic range, in the scope of onboard inertial navigation compatibility.
Inertial sensors based on cold atoms and light-pulse interferometry exhibit state-of-the-art sensitivity and ultra-low measurement bias that could revolutionize a variety of fields including geophysics and seismology, gravitational wave detection and fundamental tests of gravity, and inertial navigation. In the latter case, cold-atom interferometers are widely considered as breakthrough technology for future autonomous INSs. Nowadays, absolute quantum inertial sensors are available as commercial and field-deployable devices. Yet, their current size and complexity has not yet reached a technology readiness level compatible with mobile applications or plug-and-play operation by non-specialists. These systems are in desperate need of further development and miniaturization. We will present progress beyond these first experiments while exploring new methods relying on 3D matter-wave manipulation that can lead to interferometer geometries that are simultaneously sensitive to accelerations and rotations in 3D and can discern their vector components within a single measurement. These novel innovations produce additional sensitivity to rotations and gravity gradients which has not yet been exploited experimentally and could be a game changing innovation for future atomic sensors. The ability to measure the full acceleration and rotation vectors with a compact, high-precision, low-bias inertial sensor could strongly impact the fields of inertial navigation, gravity gradiometry, and gyroscopy.
Positioning currently relies heavily on Global Navigation Satellite Systems (GNSS). Combined with classical accelerometers and gyroscopes, precise determination of orientation and position at any given time become available. However, but the availability of GNSS (e.g. GPS) is limited and not guaranteed at all times.In this paper we present an alternative based on atom interferometry using cold atom ensembles. An inertial sensor based on cold atoms allows, in theory, for nearly drift-free measurements of inertial forces with accuracies unreached by classical sensors, but the technology is still locked away in large physics laboratories [1].This paper introduces a compact device called SECAMP, which is capable of cooling atoms down to μ-Kelvin. SECAMP has the potential to measure inertial acceleration in three degrees of freedom. In the following, we present the current experimental setup of the apparatus and outline the next steps for the inertial sensor.
Robust and accurate acceleration tracking remains a challenge in many fields. For geophysics and economic geology, precise gravity mapping requires onboard sensors combined with accurate positioning and navigation systems. Cold atom–based quantum inertial sensors can potentially provide these high-precision instruments. However, current scalar instruments require precise alignment with vector quantities. Here, we present the first hybrid three-axis accelerometer exploiting the quantum advantage to measure the full acceleration vector by combining three orthogonal atom interferometer measurements with a classical navigation-grade accelerometer triad. Its ultralow bias permits tracking the acceleration vector over long time scales, yielding a 50-fold improvement in stability (6 × 10 −8 g ) over our classical accelerometers. We record the acceleration vector at a high data rate (1 kHz), with absolute magnitude accuracy below 10 μ g , and pointing accuracy of 4 μrad. This paves the way toward future strapdown applications with quantum sensors and highlights their potential as future inertial navigation units.