This paper investigates the deterministic generation and coherent control of continuous-variable bipartite and tripartite entanglement within a multi-mirror electro-optomechanical ring cavity. The proposed architecture integrates radiation pressure with tunable Coulomb interactions, governed by external gate voltages, to establish quantum correlations between an intracavity optical field and a collective of four mechanical oscillators. We perform a rigorous stability analysis of the system, identifying the operational regimes across a broad range of free parameters, and evaluate the generation of tripartite entanglement within two distinct subsystems. Our numerical results demonstrate that while standard coherent driving combined with Coulomb coupling can generate entanglement, it is restricted to narrow detuning regions. In contrast, the introduction of squeezed light dramatically enhances quantum correlations, facilitating entanglement over a significantly wider range of normalized detuning without compromising the stability of the optomechanical system. A central finding is that the fixed charged body serves as a dynamic control parameter rather than a static component; by effectively tuning the mechanical susceptibility, it enables the generation of optomechanical entanglement that is both stronger and more resilient to thermal noise than the mechanical–mechanical entanglement mediated by direct Coulomb interaction. Furthermore, the external gate voltage provides a reliable mechanism for the continuous tuning of mechanical coupling strengths. From a practical perspective, the ability of the Coulomb coupling to act as a quantum switch for activating or suppressing entanglement suggests significant potential for quantum information control and state transfer within hybrid quantum architecture networks.
This paper investigates the deterministic generation and coherent control of continuous-variable bipartite and tripartite entanglement within a multi-mirror electro-optomechanical ring cavity. The proposed architecture integrates radiation pressure with tunable Coulomb interactions, governed by external gate voltages, to establish quantum correlations between an intracavity optical field and a collective of four mechanical oscillators. We perform a rigorous stability analysis of the system, identifying the operational regimes across a broad range of free parameters, and evaluate the generation of tripartite entanglement within two distinct subsystems. Our numerical results demonstrate that while standard coherent driving combined with Coulomb coupling can generate entanglement, it is restricted to narrow detuning regions. In contrast, the introduction of squeezed light dramatically enhances quantum correlations, facilitating entanglement over a significantly wider range of normalized detuning without compromising the stability of the optomechanical system. A central finding is that the fixed charged body serves as a dynamic control parameter rather than a static component; by effectively tuning the mechanical susceptibility, it enables the generation of optomechanical entanglement that is both stronger and more resilient to thermal noise than the mechanical–mechanical entanglement mediated by direct Coulomb interaction. Furthermore, the external gate voltage provides a reliable mechanism for the continuous tuning of mechanical coupling strengths. From a practical perspective, the ability of the Coulomb coupling to act as a quantum switch for activating or suppressing entanglement suggests significant potential for quantum information control and state transfer within hybrid quantum architecture networks.
This study investigates the generation and enhancement of quantum entanglement in an electro-optomechanical ring cavity system. The setup integrates two Coulomb-coupled mechanical resonators, which serve as the fundamental mechanism for the generation of bipartite and tripartite entanglement via charge mediated coupling. We then demonstrate the significant enhancement of this entanglement via a nonlinear parametric drive (an optical parametric amplifier, OPA), which injects a controllable nonlinearity into the cavity. We derive the system's Hamiltonian and the corresponding quantum Langevin equations, which are linearized around steady-state solutions to analyze Gaussian quantum fluctuations. Employing the covariance matrix formalism, we quantify bipartite entanglement via logarithmic negativity and tripartite entanglement via the minimum residual contangle. Our results unequivocally show that while the Coulomb interaction is indispensable for creating entanglement, the OPA acts as a powerful control tool, dramatically amplifying the degree of quantum correlations for all subsystems. We find that the strength of entanglement is highly sensitive to several parameters and can be optimized through the strategic selection of the OPA's gain and phase, the laser detuning, and the input power. A key finding is the existence of a trade-off, where parameters that maximize entanglement also constrain the stable operating regime of the system. Furthermore, thermal noise is shown to progressively degrade all quantum correlations, underscoring the necessity for low-temperature operation. These findings provide comprehensive guidance for parameter optimization, outlining a clear path from generation to enhancement, and highlight the potential of such hybrid systems as versatile platforms for controlling multipartite entanglement in quantum technologies.
We present a theoretical investigation of quantum entanglement enhancement in an electro-optomechanical system comprising a ring cavity with two Coulomb-coupled mechanical resonators and an embedded optical parametric amplifier (OPA). The system dynamics are governed by radiation pressure interactions between the optical field and mechanical modes, modified by both the Coulomb coupling and OPA-induced squeezing. Through a comprehensive quantum Langevin analysis and linearization approach, we demonstrate how these competing interactions can be exploited to generate and control entanglement. Our key finding is that the Coulomb interaction strength is fundamental for generating bipartite entanglement, both between directly coupled mechanical modes and, more remarkably, between optical and mechanical modes, thereby influencing the entire system. The OPA parameters, namely the gain and phase, provide powerful control knobs for entanglement optimization. Notably, the OPA enhances entanglement robustness against thermal noise, resulting in stronger quantum correlations. We quantify these effects through covariance matrix methods and logarithmic negativity measures. The study provides new insights into hybrid optomechanical entanglement generation, showing how combined charge-mediated coupling and optical squeezing can overcome typical limitations of purely optomechanical systems. These results offer practical guidelines for experimental implementations in quantum information processing and macroscopic quantum state engineering, particularly in systems where environmental noise and parameter stability are critical concerns.
We propose a novel scheme to generate and manipulate bipartite and tripartite entanglement and Bell nonlocality in a closed-loop three-mode optomechanical system, where two optical modes are simultaneously coupled to a mechanical mode via typical optomechanical interactions and also coupled to each other through field transmission. This configuration gives rise to a phase-sensitive coupling, in which the relative phase directly controls the population distribution between two optical modes, enabling coherent redistribution of quantum correlations. By tuning this relative phase, we achieve deterministic switching of bipartite entanglement between two optical-mechanical pairs, as well as tunable genuine tripartite entanglement among three modes. Employing the displaced-parity measurement, we construct both the bipartite and tripartite Bell inequalities in phase space and observe maximal violations of approximately 2.32 and 3, respectively, which coincide exactly with the values achievable for ideal bipartite and tripartite Einstein-Podolsky-Rosen states. Counterintuitively, we find that the tripartite Bell nonlocality can persist even when the genuine tripartite entanglement is absent, providing deeper insight into the relationship between these two types of quantum correlations. Furthermore, we systematically analyze the effects of mechanical dissipation and thermal noise, identifying the parameter regions where Bell violation survives under realistic experimental conditions. Our results establish a comprehensive framework for generating, controlling, and verifying multipartite quantum correlations, paving the way towards phase-tunable quantum networks and noise-resilient tests of quantum foundations.
We theoretically propose a method to generate tripartite entanglement of three mechanical oscillators in an optomechanical array. We consider a system comprised of three bichromatically driven optomechanical systems which are coupled to each other via Coulomb interaction of the mechanical oscillators. We show that, for small Coulomb coupling strength, steady tripartite entanglement of the three mechanical oscillators with time periodicity can be generated due to the combined effect of the two-tone drivings and the Coulomb coupling. At large Coulomb coupling strength, the tripartite entanglement exhibits steady entanglement sudden death and revival. The duration of entanglement death during one period can be controlled by the Coulomb coupling strength. The tripartite entanglement is robust against the mechanical thermal noise. Our paper provides us a route for exploring and exploiting controllable and robust multipartite entanglement among macroscopic mechanical oscillators.
Quantum optomechanical systems enable versatile control of non-classical light. We study two-mode squeezed-light generation in a driven optomechanical cavity with parametrically amplified optical modes coupled to mechanical resonator. Coherent driving reveals a rich control landscape where parametric nonlinearity, optomechanical coupling, and reservoir interactions jointly tailor quantum correlations-including two-mode squeezing, entanglement, steering, and discord. Remarkably, mechanical oscillators not only mediate optical entanglement but also act as a squeezing resource, enabling enhancement or suppression of quantum correlations via parameter tuning. We derive steady-state second-order moments and closed-form covariance matrix expressions, quantifying entanglement via logarithmic negativity, steering via Reid criterion, and discord via von Neumann entropy, providing a comprehensive framework for optimized generation of quantum correlations in hybrid quantum systems.
Abstract The ability to engineer entangled states that involve macroscopic objects is of particular importance for a wide variety of quantum‐enabled technologies, ranging from quantum information processing to quantum sensing. Here how to achieve coherent manipulation and enhancement of quantum entanglement in a hybrid optomechanical system, which consists of a Fabry–Pérot cavity with two movable mirrors, an optical parametric amplifier (OPA), and an injected squeezed vacuum reservoir is proposed. It is shown that the advantages of this system are twofold: 1) one can effectively regulate the light‐mirror interactions by introducing a squeezed intracavity mode via the OPA; 2) when properly matching the squeezing parameters between the squeezed cavity mode and the injected squeezed vacuum reservoir, the optical input noises can be suppressed completely. These peculiar features of this system allow the generation and manipulation of quantum entanglement in a coherent and controllable way. More importantly, it is also found that such controllable entanglement, under some specific squeezing parameters, can be considerably enhanced in comparison with those of the conventional optomechanical system. The work, providing a promising method to regulate and tailor the light‐mirror interaction, is poised to serve as a useful tool for engineering various quantum effects which are based on cavity optomechanics.