Quantum image representation (QIR) is the basic idea behind quantum image processing. It explains how a normal image is converted into quantum states so that it can be processed using quantum computers. The commonly used models for QIR are Flexible Representation of Quantum Images (FRQIs) and Novel Enhanced Quantum Representation (NEQR). Though these approaches highlight the potential of quantum-based image encoding, the limitation of practical applicability on Noisy Intermediate-Scale Quantum (NISQ) devices exists. In this paper, we propose an intensity-preserving quantum image representation (IP-QIR) scheme that aims to maintain accurate grayscale intensity information while significantly reducing quantum resource usage. The proposed method employs a controlled rotation-based encoding strategy, where pixel intensities are embedded into the measurement probability of a single intensity qubit, and spatial information is represented using position qubits. To further enhance feasibility on near-term quantum hardware, the framework operates on small image patches instead of full-resolution images, thereby reducing circuit depth and overall complexity. The performance of the proposed IP-QIR approach is evaluated through IBM Qiskit simulations on three types of grayscale images: synthetic image patches, synthetic aperture radar (SAR) images, and medical tuberculosis (TB) chest X-ray images. Experimental results demonstrate that IP-QIR achieves better intensity preservation than FRQIs and NEQR, with fidelity values reaching up to 84.12% for both SAR and medical datasets. In addition, IP-QIR represents a 4×4 image patch using only five qubits, which significantly reduces the qubit requirement when compared to NEQR, while still preserving high reconstruction accuracy.
Quantum image representation (QIR) is the basic idea behind quantum image processing. It explains how a normal image is converted into quantum states so that it can be processed using quantum computers. The commonly used models for QIR are Flexible Representation of Quantum Images (FRQIs) and Novel Enhanced Quantum Representation (NEQR). Though these approaches highlight the potential of quantum-based image encoding, the limitation of practical applicability on Noisy Intermediate-Scale Quantum (NISQ) devices exists. In this paper, we propose an intensity-preserving quantum image representation (IP-QIR) scheme that aims to maintain accurate grayscale intensity information while significantly reducing quantum resource usage. The proposed method employs a controlled rotation-based encoding strategy, where pixel intensities are embedded into the measurement probability of a single intensity qubit, and spatial information is represented using position qubits. To further enhance feasibility on near-term quantum hardware, the framework operates on small image patches instead of full-resolution images, thereby reducing circuit depth and overall complexity. The performance of the proposed IP-QIR approach is evaluated through IBM Qiskit simulations on three types of grayscale images: synthetic image patches, synthetic aperture radar (SAR) images, and medical tuberculosis (TB) chest X-ray images. Experimental results demonstrate that IP-QIR achieves better intensity preservation than FRQIs and NEQR, with fidelity values reaching up to 84.12% for both SAR and medical datasets. In addition, IP-QIR represents a 4×4 image patch using only five qubits, which significantly reduces the qubit requirement when compared to NEQR, while still preserving high reconstruction accuracy.
Abstract Quantum Image Representation (QIR) is a fundamental concept in quantum image processing. It describes how classical images are converted into quantum states for processing on quantum computers. Researchers proposed several QIR models, with FRQI and NEQR being the most popular ones. These models show the possibilities of the quantum image encoding. Nevertheless, they are also limited in some way. Mostly, pixel intensity accuracy, the required number of qubits, and circuit complexity have trade-offs. Their application to Noisy Intermediate-Scale Quantum (NISQ) devices becomes challenging, the quantum resources being small in such devices, due to this. In the following paper, we introduce our own approach, which is the Intensity-Preserving Quantum image Representation (IP-QIR). The key aim of IP-QIR is to maintain the information about the grayscale intensities and decrease the amount of quantum resources. IP-QIR quantifies pixel intensities by a controlled rotation scheme. The measurement statistics of a single qubit hold the intensity information and the position qubits represent the spatial information. The strategy uses small patches of images rather than complete images to make it easy to implement. This will decrease the depth of circuit design and makes the approach less advanced to the near-term quantum hardware. IBM Qiskit simulations are used in assessing the performance of IP-QIR. The three types of grayscale images of which experiments are run are the synthetic image patches, SAR images and medical TB chest X-ray images. It is revealed that IP-QIR maintains the intensity information compared to the FRQI and NEQR. SAR and medical data can reach values of fidelity of 84.12\%. The other notable point is that the size of a 4 x 4 image patch only needs five qubits which are much lower than in NEQR. Meanwhile, good reconstruction accuracy is achieved. These findings demonstrate the fact that IP-QIR is an effective and realistic approach to quantum image representation on the NISQ-era quantum devices.
Abstract The Quantum Image Representation (QIR) remains one of the most significant challenges in Quantum Image Processing (QIP) and Quantum Machine Learning (QML) with the resource constraints required by Noisy Intermediate-Scale Quantum (NISQ) hardware. Currently available pixel representation schemes, such as Flexible Representation of Quantum Images (FRQI) and Novel Enhanced Quantum Representation (NEQR), typically have circuit depth and the number of required qubits that grow with image resolution, rendering them impractical for large-scale images. To alleviate these limitations, we propose the Qubit-Efficient and Resolution-Independent Quantum Image Representation (QRISP), a compact, feature-aware encoding framework that is resource-efficient while preserving discriminative information for classification. The proposed approach divides an image into a user-configurable number of non-overlapping blocks, stores complementary statistical descriptors such as mean intensity, local variance, dominant gradient orientation, and calculates the same descriptors using a series of parameterized rotation gates in a quantum feature register; a position register is used to store block indices, and a lightweight entanglement layer is used to store the feature correlations. One of the major features of QRISP is the resolution-independent quantum circuit structure of quantum resources, which depend on the block configuration rather than the image size, allowing flexible processing and trade-offs between representation fidelity and qubit complexity. Experimental results with the MNIST and Fashion-MNIST datasets for the case of Quantum Support Vector Machine (QSVM) and Quantum Neural Network (QNN) pipelines show significant improvement in the number of gates and depth of the circuits, as well as in the time for computing the kernel, without compromising the classification results from FRQI and NEQR, with respect to which their performance is competitive. This shows their potential for scalable, NISQ-oriented quantum image processing.
Abstract Quantum image representation constitutes a foundational component of quantum image processing; however, its practical deployment on Noisy Intermediate-Scale Quantum (NISQ) hardware is fundamentally constrained by the cost of quantum state preparation. Existing representations such as the Flexible Representation of Quantum Images (FRQI) and the Novel Enhanced Quantum Representation (NEQR) rely on uniform, full-resolution encoding strategies that incur rapidly increasing gate counts and circuit depths, leading to severe decoherence and error accumulation on near-term devices. These limitations are particularly pronounced for heterogeneous and information-sparse modalities such as medical Magnetic Resonance Imaging (MRI) and Synthetic Aperture Radar (SAR), where uniform pixel-wise encoding introduces substantial redundant state preparation. To address these constraints, we propose Adaptive Hybrid Quantum Image Representation (AHQIR), a saliency-driven selective quantum state-preparation framework designed for efficient encoding of medical and SAR imagery under NISQ limitations. AHQIR departs from global encoding by employing a classical adaptive preprocessing stage to identify diagnostically significant regions in MRI and dominant backscatter structures in SAR images using a statistical thresholding criterion, thereby restricting quantum encoding to a salient pixel subset S. The quantum realization of AHQIR integrates Perception-Aided Encoding (PE) and Coherent-Size Encoding (CE) mechanisms, which condition state preparation on salient pixel coordinates and eliminate the requirement for power-of-two image padding. As a result, circuit depth and multi-qubit gate count scale with the number of salient pixels rather than total image size, enabling physically realizable circuits within current coherence limits. This selective and intentionally lossy design sacrifices global pixel-level fidelity in non-salient regions in order to preserve semantic and structural fidelity within regions of interest. AHQIR is evaluated against multiple state-of-the-art quantum image encoding schemes, including FRQI and NEQR, across Brain Tumor MRI and real-world SAR datasets. Experimental results demonstrate substantial reductions in gate count and improved robustness under realistic noise models, while maintaining reconstruction errors below clinically and analytically relevant thresholds for salient regions. These findings indicate that saliency-aware, selective state preparation offers a practical and scalable pathway for quantum.
Quantum image processing represents a transformative approach to visual data analysis, leveraging the principles of quantum computing to overcome classical limitations. This work explores two prominent quantum image encoding methods: FRQI (Flexible Representation of Quantum Images) and NEQR (Novel Enhanced Quantum Representation). FRQI excels in qubit efficiency, making it suitable for hardware implementation, while NEQR offers superior precision in pixel intensity representation, ideal for complex image processing tasks. We detail the implementation of these algorithms, including preprocessing, quantum circuit design, and simulation, using platforms like Qiskit. The study highlights the potential of quantum image processing in fields such as medicine, industry, and environmental monitoring, while addressing challenges like qubit limitations and noise sensitivity. This research contributes to advancing quantum computing applications, paving the way for innovative and sustainable technological solutions.
Abstract Color images (i.e. RGB) contain rich visual information essential for object recognition, spatial context analysis, and decision-making across fields such as medical imaging, remote sensing, and computer vision. Processing such data efficiently requires significant computational resources, which can be addressed by the parallelism and speed of quantum computing. Representing RGB image data within quantum states enables efficient and scalable processing compared to classical methods. In recent years, various quantum image representation techniques have been developed based on probabilistic and basis state encoding. Probabilistic encoding methods are efficient for representing quantum binary images but face challenges in accurately reconstructing RGB images. This is due to the randomness introduced by measurement. To overcome this limitation, several basis state encoding approaches have been proposed. These methods map classical pixel values directly to quantum basis states. Thus enabling accurate grayscale and RGB image representation. However, they often require a larger number of qubits and complex gate operations, leading to higher circuit preparation costs. So, there exists substantial potential for quantum probabilistic RGB image representation using randomized measurements. Hence, our objective is to develop a probabilistic quantum image representation, capable of representing RGB images using fewer qubits. This method aims to reconstruct the classical image with high accuracy using randomized measurements, thereby addressing the major limitations of probabilistic methods. To balance image quality with resource efficiency, we propose an Improved Probabilistic Quantum Image Representation (IPQIR) method based on equal superposition states. This approach utilizes a quantum circuit with Hadamard Gate to encode classical pixel values into equal superposition states. The original image is then reconstructed by performing multiple quantum measurements and applying expectation value estimation to average the outcomes. To align with existing research in quantum image representation, quantum state tomography and different applications are utilized as standard evaluation methods to assess the effectiveness of the proposed algorithm. The tomography achieved a fidelity of 97.51%. In addition, various parametric and non-parametric statistical tests were performed to verify the accuracy of the reconstructed classical image. The high Pearson (0.9983) and Spearman (0.9959) correlation coefficients indicate a nearly perfect linear and monotonic relationship between the original and reconstructed images.
Quantum Image Representation (QIR) is a key element in Quantum Image Processing (QIP) and is essential for the effective management of quantum information. To process quantum images, it is necessary to convert classical digital image data into formats suitable for quantum computers. This conversion involves managing, manipulating, and storing the data efficiently in quantum states. The importance of QIR has spurred numerous studies based on the principles of quantum mechanics, aiming to develop effective methods for representing quantum images. These methods are vital for advancing quantum computing applications related to image processing. In this paper, we will discuss and compare two prominent techniques for encoding images into quantum states: the Flexible Representation of Quantum Images (FRQI) and the Novel Enhanced Quantum Representation (NEQR). These methods showcase different approaches to quantum image handing, highlighting the evolving nature of quantum image processing technology.