This whitepaper presents QRIC (Quantum Resonance Identity Core), a room-temperature hardware identity architecture that repurposes the layered NV-diamond platform developed for Quantum Resonance Core (QRC) into a security-oriented system for hardware-rooted cryptographic identity. Rather than treating fabrication variability in nitrogen-vacancy (NV) ensembles as a defect to be removed, QRIC treats manufacturing-induced stochastic resonance variation as an exploitable entropy source. The proposed architecture couples a silicon-carbide substrate, an NV-bearing synthetic diamond layer, an adaptive microwave-magnetic-optical control matrix, a photonic readout plane, and a classical security controller that performs challenge generation, resonance capture, drift compensation, and fuzzy key extraction. The result is a Quantum Physical Unclonable Function (Quantum PUF) concept intended to derive device-specific cryptographic key material without persisting a static secret in non-volatile memory. This paper defines the system model, physical basis, threat model, experimental workflow, prototype bill of materials, and validation metrics required to move QRIC from concept to laboratory demonstration. The manuscript is intentionally framed as a proposed architecture and experimental program rather than a claim of already validated performance.
This whitepaper presents QRIC (Quantum Resonance Identity Core), a room-temperature hardware identity architecture that repurposes the layered NV-diamond platform developed for Quantum Resonance Core (QRC) into a security-oriented system for hardware-rooted cryptographic identity. Rather than treating fabrication variability in nitrogen-vacancy (NV) ensembles as a defect to be removed, QRIC treats manufacturing-induced stochastic resonance variation as an exploitable entropy source. The proposed architecture couples a silicon-carbide substrate, an NV-bearing synthetic diamond layer, an adaptive microwave-magnetic-optical control matrix, a photonic readout plane, and a classical security controller that performs challenge generation, resonance capture, drift compensation, and fuzzy key extraction. The result is a Quantum Physical Unclonable Function (Quantum PUF) concept intended to derive device-specific cryptographic key material without persisting a static secret in non-volatile memory. This paper defines the system model, physical basis, threat model, experimental workflow, prototype bill of materials, and validation metrics required to move QRIC from concept to laboratory demonstration. The manuscript is intentionally framed as a proposed architecture and experimental program rather than a claim of already validated performance.
Quantum Physically Unclonable Functions (QPUFs) are emerging hardware primitives that harness inherent quantum principle to produce device-specific challenge–response behavior. By embedding quantum-mechanical "fingerprints" into devices, QPUFs can derive unique cryptographic keys and identities, yielding robust hardware roots of trust. This paper systematically reviews QPUF principles, architectures, and security properties, and explores their integration into next-generation networking paradigms with industrial demonstrations. We detail how QPUFs can enable secure device authentication, key generation across quantum communication links, 6G wireless, IoT/edge deployments emphasizing practical implementation strategies and system integration in future networks along with technical challenges. Through this comprehensive analysis, we highlight the transformative potential of QPUFs in delivering hardware-rooted, information-theoretic security for interconnected networks, and outline directions for further research.
As advanced physical cloning and cyber-extraction techniques proliferate, achieving absolute hardware-level information security has become a paramount global challenge. Conventional architectures systems are fundamentally vulnerable because deterministic memory and cryptographic hardware are physically decoupled, exposing sensitive data to interception. While physical unclonable functions (PUFs) offer robust authentication, integrating them with high-density data writing within a unified nanoscale medium remains elusive. Here, we present an intrinsically secure all-in-one architecture that inextricably fuses high-dimensional data encoding with multiscale physical encryption within single nanodiamonds (NDs). Through precise focused-electron-beam irradiation, we achieve single-nanoparticle defect engineering, enabling deterministic base-36 data writing within individual NDs. Crucially, this customized memory layer is permanently locked within the medium's inherent stochasticity, combining macroscopic spatial PUFs with strictly irreproducible atomic-scale quantum fingerprints extracted via optically detected magnetic resonance (ODMR). By seamlessly embedding deterministic memory into an unclonable physical environment, our approach intrinsically eliminates the vulnerabilities of separated hardware, providing an unconditionally secure solid-state foundation for tamper-proof memory chips, zero-trust networks and next-generation data vaults.
Physical unclonable functions (PUFs) are hardware structures in a physical system (e.g. semiconductor, crystals etc.) that are used to enable unique identification of the semiconductor or to secure keys for cryptographic processes. A PUF thus generates a noisy secret reproducible at runtime. This secret can either be used to authenticate the chip, or it is available as a cryptographic key after removing the noise. Latest advancements in the field of quantum hardware, in some cases claiming to achieve quantum supremacy, highly target the fragility of current RSA type classical cryptosystems. As a solution, one would like to develop Quantum PUFs to mitigate such problem. There are several approaches for this technology. In our work we compare these different approaches and introduce the requirements for QTOKSim, a quantum token based authentication simulator testing its performance on a multi-factor authentication protocol.
We present hereby a high-level hardware-agnostic framework for a resonant-control-based approach to stabilizing quantum processors. The method improves coherence and logical error performance by aligning control operations with intrinsic system response features through generalized resonance and quasi-aperiodic timing. This paper intentionally omits implementation details, proprietary algorithms, and confidential calibration methods to avoid prejudicing ongoing patent proceedings. Instead, we focus on conceptual formalism, theoretical motivation, and simulated indicators of performance improvement. Detailed implementation remains confidential pending patent issuance and licensing discussions. Patent pending (U.S. Provisional Application filed November 2025). All specific resonant carrier frequencies, base timing periods, numerical ratio scaling constants, envelope-shaping functions, and adaptive feedback algorithms are trade secrets of Dubito Inc. and are not disclosed in this work The resonant-control architecture (RCA) introduced in this work suggests a conceptual shift in how quantum decoherence and control noise are addressed at scale. Rather than treating decoherence purely as a consequence of microscopic material limitations or stochastic fluctuations, RCA frames the problem in terms of macroscopic dynamical structure, namely, the presence of device-specific resonance features and stability basins embedded within the quantum system’s effective response landscape. By aligning control pulses with these structural features, one can reduce sensitivity to low-frequency drift and non-Markovian disturbances without requiring explicit modeling of their origins. From a theoretical standpoint, RCA generalizes the idea behind dynamical-decoupling and filter-function approaches, but differs critically in its departure from strict periodicity or analytically prescribed timing sequences. Whereas classical decoupling protocols rely on precise, regular intervals with well-defined spectral notches, our resonant alignment leverages quasi-aperiodic intervals to avoid aliasing while maintaining coherence with intrinsic dynamical modes. This opens a pathway to more stable long-time behavior, especially under significant drift or structured noise. Another key implication concerns scalability. Fault-tolerant quantum computing requires the ability to sustain high-rate syndrome extraction and realtime feedback, not only sufficiently low physical error rates. A reduction in effective sensitivity to slow drifts or burst-like errors directly impacts the stability of logical operations, potentially easing the overhead associated with syndrome cycles and decoder latency. Though we intentionally avoid specifying exact performance metrics, simulation trends indicate that RCA can modify the effective scaling constants governing logical error suppression, providing a complementary layer to code-level corrections. Because RCA is hardware-agnostic, its implications extend across modalities, including superconducting qubits, bosonic encodings, trapped ions, and photonic platforms. Each modality has distinct noise profiles, yet all exhibit some form of internal dynamical structure that can be harnessed for resonant alignment. This offers a unifying perspective that could aid in cross-platform benchmarking and co-design strategies between hardware and control layers. Finally, RCA opens conceptual avenues for understanding the interplay between classical control and quantum dynamics. By abstracting away implementation details while emphasizing structural alignment, it establishes a theoretical foundation for future studies on stability basins, quasi-periodic scheduling, and adaptive resonance identification in noisy quantum systems. The RCA framework generalizes known dynamical-decoupling and frequency-modulated approaches while remaining distinct in its treatment of internal resonance and adaptive quasi-aperiodicity. Because implementation-specific algorithms are withheld, the paper serves as a conceptual introduction rather than a disclosure of patent-sensitive information. We have outlined a resonant-control framework that enhances quantum coherence and suppresses logical error accumulation by exploiting intrinsic dynamical structure within quantum hardware. The approach is fundamentally architecture-neutral and can be integrated into existing control stacks without requiring modifications to qubit design or measurement infrastructure. While the specific algorithms and calibration methods are withheld to preserve ongoing patent protections, the conceptual and theoretical basis presented here provides a foundation for future analyses and controlled experimental evaluations. This work suggests that progress toward scalable quantum computation may depend as much on control-level innovation as on hardware improvements. Resonant alignment and quasi-aperiodic timing sequences offer a pathway for mitigating drift sensitivity and noise coupling, potentially reducing the resource overhead associated with quantum error correction. Future research will focus on detailed modeling, cross-platform validation, and integration with advanced decoding and feedback systems. In summary, the resonant-control architecture represents a promising direction for improving quantum system stability and should be considered an essential component of next-generation quantum control and fault tolerance. We present a trade-secret-safe exposition of a resonant-control approach to improving quantum coherence and logical error performance. Detailed mechanisms remain proprietary pending patent review. Nov. 25, 2025, Daniel Solis Dubito Inc. www.dubito-ergo.com
With the increase of digital devices, the need for robust authentication mechanisms has become crucial. Traditional methods relying on cryptographic key management are susceptible to various risks, particularly the exposure of keys to interception or theft. As cyber threats evolve, the short-comings of these methods are accentuated, necessitating more secure solutions. Physically Unclonable Functions (PUFs) have emerged as a potential alternative, utilizing inherent hardware variations for device authentication without stored secrets. However, recent studies reveal vulnerabilities in conventional PUF implementations. Simultaneously, there's a growing recognition for authentication mechanisms tailored for quantum devices. This recognition has prompted the exploration of Quantum PUFs (QPUFs), which represent a promising solution to enhance security and reliability, leveraging the unique properties of quantum mechanics. In this paper, we propose a novel approach using QPUFs for device authentication that does not require any quantum communication channel or even quantum memory. We design a quantum circuit to serve as a QPUF, evaluating metrics such as instability, randomness, and uniqueness. Additionally, we devise an authentication scheme that exploits the challenge-response paradigm, taking advantage of the distinctive properties of quantum PUFs. Furthermore, we delineate a threat model to identify and mitigate potential risks associated with the authentication process. By assessing the proposed QPUFs efficacy on real real quantum hardware provided by IBM, this research contributes to the advancement of secure authentication protocols in quantum era.
Physical Unclonable Functions (PUFs) provide hardware-level security by exploiting intrinsic randomness to produce device-unique responses. However, machine learning and side-channel attacks increasingly undermine their classical assumptions, calling for new approaches to ensure unforgeability. Quantum mechanics naturally supports this goal through intrinsic randomness and the no-cloning theorem, motivating the study of Quantum Physical Unclonable Functions (QPUFs). Yet, existing QPUF models often assume ideal unitary dynamics, neglecting non-unitary effects such as decoherence and dissipation that arise in real quantum devices. This work introduces a new class of non-unitary QPUFs that leverage open quantum system dynamics as a foundation for security. Three architectures are proposed: the Dissipative QPUF (D-QPUF), which uses amplitude damping as an entropy source; the Measurement-Feedback QPUF (MF-QPUF), which employs mid-circuit measurements and conditional unitaries; and the Lindbladian QPUF (L-QPUF), which models Markovian noise via the Lindblad master equation and Trotter-Suzuki decomposition. Simulation results show that these non-unitary designs achieve strong uniqueness, uniformity, and unforgeability, with controllable reliability trade-offs from stochastic noise. The L-QPUF, in particular, exhibits exponential modeling resistance under limited challenge-response access. By reframing environmental noise as a constructive resource, this work establishes a framework for noise-aware quantum hardware authentication and highlights non-unitary evolution as a viable foundation for post-quantum security.