Fiber-integrated diamond optomechanical crystal with embedded NV centers
K. Sato, H. Kurokawa, S. Ishida, H. Matsukiyo, Masao Nishioka, K. Iijima, S. Ji, H. Otsuki, Y. Sekiguchi, Onoda Shinobu, T. Baba, S. Iwamoto, H. Kosaka
For the realization of all-optical readout, scalable superconducting quantum computers, a quantum transducers with low noise, high efficiency, and ultra-low power consumption is essential. However, systems meeting all these requirements remain under development. Our group is focusing on implementing ultra-low power quantum transducers that utilize interactions between single microwave and optical photons and a color centers in a diamond optomechanical resonators.
For the realization of all-optical readout, scalable superconducting quantum computers, a quantum transducers with low noise, high efficiency, and ultra-low power consumption is essential. However, systems meeting all these requirements remain under development. Our group is focusing on implementing ultra-low power quantum transducers that utilize interactions between single microwave and optical photons and a color centers in a diamond optomechanical resonators.
Toward the realization of a large-scale fault-tolerant quantum computer, the development of microwave-to-optical quantum transducers has been actively underway over the past 10 years. Optical connections between refrigerators enable wide-bandwidth, flexible, room-temperature transmission of quantum information, extending the computing capacity of superconducting quantum processors. In this research, we explore the possibility of a diamond color-center-based quantum interface. We report the current status of developments in our fiber-integrated nanophotonic diamond devices.
Luminescent lattice defects (so called “color centers”) in diamond provide a robust, solid-state architecture for exploring quantum optics, with many facilitating direct access to highly coherent electron and nuclear spins. The past two decades have seen tremendous advances in our ability to prepare and control the quantum states of these atom-like systems. For instance, demonstrations that leverage the diamond nitrogen vacancy (NV–) center as a spin-photon interface have included the generation of indistinguishable photons, a quantum bit memory exceeding 1 second, entanglement of two distance solid-state qubits, and deterministic long distance quantum teleportation. While diamond color centers are an attractive platform for scalable quantum information processing, the diamond solid-state matrix, by its very nature, inhibits efficient photon collection into either free-space or fiber-optical systems. Due to its large refractive index, emitted photons are inevitably trapped within the diamond crystal by total internal reflection, limiting count rates and overall scalability of information processing via quantum optical protocols. To this end, there has been significant progress towards integrating individual diamond color centers within well-defined radiation channels: namely, those provided by monolithic diamond nanophotonic networks. Currently, on-chip low loss (~ few db/cm) diamond waveguide networks are available, as well as key passive photonic elements like micron scale ring and disk resonators and photonic crystal cavities, with high optical quality (Q) factors. Specifically, we recently demonstrated a scalable ‘angled-etching’ nanofabrication method for realizing nanophotonic networks starting from bulk single-crystal diamond substrates (MJ Burek et al., Nano Letters 2012, MJ Burek et al., Nat Comm. 2014). Angled-etching employs anisotropic oxygen-based plasma etching at an oblique angle to the substrate surface, resulting in suspended optical structures with triangular cross-sections. Using this approach, we demonstrated high Q-factor (> 10^5) optical nanocavities fabricated in bulk single-crystal diamond, operating over a wide wavelength range (visible to telecom). Beyond isolated photonic devices, we have further developed free-standing angled-etched waveguides which efficiently route photons between diamond optical nanocavities, while maintaining physical support through attachment to the bulk substrate. Although on-chip diamond nanophotonics realized by angled-etching continue to mature, efficient off-chip optical coupling schemes which provide near seamless transition of photons on-chip into commercial optical fibers remain an outstanding challenge. This is especially pertinent in applications involving single photons, such as quantum optics with diamond color centers. Herein, we demonstrate a high efficiency fiber-optical interface with aforementioned on-chip diamond nanophotonic networks, achieving > 90% power coupling at both telecom and visible wavelengths. The coupling scheme utilizes a single mode optical fiber, with one end fabricated into a conical taper, to adiabatically transition guided light between on-chip tapered diamond waveguides and off-chip optical fiber networks. Additionally, we develop techniques to robustly pigtail single-mode fibers with diamond waveguide couplers, yielding a packaged technology that may potentially enable deployment in harsh environments, including vacuum, sub-Kelvin cryogenics, or even liquid/biological environments. With these newly developed optical integration schemes, single-crystal diamond is now a viable integrated nanophotonics platform, servicing a range of applications, from non-linear optics and chemical sensing, to quantum science and cavity optomechanics.
Superconducting circuits are important technological tools that have found various applications, notably hypothetical future superconducting quantum computers. Scaling such systems further is, however, proving challenging because of thermal heat load and space constraints in cryostats. One way of improving the scalability of such systems would be to resort to optical fibers for controlling the circuits in cryostats, as well as mediating long-distance interaction between them while preserving quantum coherence. Such a strategy relies on building a coherent interface between GHz frequencies and optical frequencies. This interface, referred to as "microwave-optical transducer", would need to exhibit high photon conversion efficiencies and very low added noise, ideally less than a quantum, in a cryogenic environment. Since the prospects of weaving networks of optically connected superconducting quantum processors have now attracted the attention of the scientific community for more than a decade, very efficient transducers have already been proposed and realized. However, despite their impressive performances against selected metrics, often equivalent to optimizing the on-chip conversion efficiency alone, none of the approaches pursued so far really solved the qubit interconnection problems in ways that could be applied to large-scale systems in the near future. The aim of this thesis was to develop transduction approaches that would ultimately enable optical driving of superconducting circuits and quantum state transfer between microwave and optical frequencies, while at the same time ensuring good scalability, both in terms of wafer manufacturability and integration in cryogenic environments. Integrated photonic circuits based on silicon nitride appeared as a promising platform, as silicon nitride is a CMOS-certified material, has a transparency window compatible with optical fibers and lacks two photon absorption. Realizing the coupling between microwave and optical frequencies in a way similar to what is done in optomechanics is desirable, because the field of optomechanics has seen the establishement of techniques that enable control of the low frequency degree of freedom at the quantum mechanical level, including ground state cooling, control of the susceptibility by dynamical backaction, quantum state transfer and entanglement. The heterogeneous integration of nonlinear crystalline thin films, such as lithium niobate and lithium tantalate, onto silicon nitride photonic circuitry endows it with an electro-optic activity that emulates the optomechanical interaction, while offering an inherent access to the microwave degree of freedom. However, material nonlinearities, including photorefraction, charge screening, and hysteresis, introduce complications that motivate exploring alternative approaches. Here, alongside an electro-optic implementation, a transducer that leverages the interaction of bulk acoustic resonances excited by micro-electromechanical systems with whispering-gallery-like modes of microresonators is presented. Coherent transduction between microwave and optical fields is demonstrated, and optomechanical dynamical backaction is observed. The transducers fast bandwidth, compatibility with multiplexing and ability to down-convert microwaves suggest interesting prospects, particularly upon further improvements of the optomechanical coupling.
Due to its high coherence in transmission over a large distance in the ambient environment, the quantum optical system has been a prevailing platform for long-distance quantum communication, which was recently realized over a continental distance with a low earth orbit satellite and ground stations [102, 70]. However, the pure quantum optical system has so far shown weak interactions between photon and matter, which makes it inefficient in carrying out deterministic quantum gates for quantum repeater based scalable quantum network and quantum computing. On the other hand, superconducting quantum systems operating in the microwave domain with Josephson junction transmon qubits have proven to be capable of efficient deterministic quantum operations on quantum states [86, 87, 66]. Nevertheless, such architecture is prone to errors and decoherence due to cross-talk between microwave elements in a large-scale superconducting quantum circuit. Furthermore, superconducting systems, in general, also have large footprint (100s um) elements (resonators and superconducting quantum bits) [92, 60] that limit the ability to scale up a superconducting quantum system. Moreover, microwave quantum circuits require cooling to around 10 mK, making it unsuitable for communicating quantum information outside a dilution refrigerator (DF). Micro- and nano- acoustic elements have been extensively used in conventional integrated information processing systems due to their compactness and high coherence [97]. Acoustic systems in quantum engineering also have the advantage of being a platform for universal couplings between various quantum systems including spins, optical photons, and superconducting circuits. As it will be discussed in this thesis, elements critical to scalable optical quantum network and superconducting quantum circuit can be constructed relying on the cavity optomechanics and piezoelectric interactions. Optomechanical interaction is concerned with the light pressure coupling of cavity mechanical deformation to a strong optical field. This interaction has allowed the close to mechanical ground state cooling of mechanical resonators using laser and the ultra-sensitive displacement measurement that led to the detection of gravitational waves in the LIGO collaboration [125, 25]. Optomechanical crystals (OMCs) are lithographically patterned devices which contain a periodic structure that host bandgaps for both optical band electromagnetic waves and microwave band acoustic waves. A properly engineered defect in the crystal can confine and localize acoustic and electromagnetic modes of similar wavelengths into a small mode volume [17, 20, 21]. A strong optomechanical coupling, which can be achieved between such strongly confined co-localized optical and acoustic modes, can be used in engineering the quantum state of mechanical motion to realize useful quantum devices such as a high-coherence quantum memory [74] and an optomechanical high efficiency optical isolator for unidirectionally connecting distant optical cavities via an acoustic bus [37]. To strongly couple the mechanical degree of freedom with a superconducting quantum circuit, various methods can be used, ranging from electromechanic coupling (electric coupling to a mechanically compliant capacitor), magnetomechanical coupling (magnetic coupling to a vibrating SQUID loop), and piezoelectric coupling. The recent advent of quantum acoustics [23, 8, 9] was realized with the strong piezoelectric coupling between a superconducting transmon qubit and a high-coherence mechanical resonator. The engineered strong piezoacoustic coupling provides the possibility to carry out deterministic ultra-high fidelity two-qubit quantum gates on non-classical mechanical quantum states [52]. This ability together with the recent demonstration of ultra-long phonon lifetime mechanical resonators show the possibility of integrating the ultra-high quality mechanical resonator as a compact quantum memory element and even a new ultra-compact (10s um) quantum bit architecture for scalable superconducting quantum circuits. Furthermore, the strong piezoelectric coupling that can transduce quantum state in a superconducting circuit into mechanical wave also makes it possible to efficiently transduce a quantum state between a superconducting quantum circuit and a telecommunication band optical channel via a mechanical waveguide connected to an optomechanical crystal cavity.
Scaling up superconducting quantum processors remains a central challenge for realizing fault-tolerant quantum computation. Although distributed architectures based on optical photons offer a promising route to scalability, they require an efficient microwave-to-optical quantum transducer that operates at cryogenic temperatures. Existing approaches typically rely on strong optical pumping, which induces undesirable heating and degrades single-photon coherence. Here, we propose a microwave-to-optical quantum transducer based on resonant scattering at a single color center embedded in a diamond optomechanical resonator. We show that strong coupling between the color center and the optical cavity enables coherent conversion at extremely weak pump powers on the order of 10 pW. The proposed scheme enables remote entanglement generation at a kilohertz-scale rate with a fidelity exceeding 0.9, demonstrating a viable pathway toward ultra-weak-pump and high-efficiency quantum transducers based on a solid-state defect.
The realization of Fault-Tolerant Superconducting Quantum Computer requires more than one million qubits, but the associated increase in microwave interconnects is a major challenge to be solved in terms of scalability and heat influx. Quantum Transducers, which convert microwave signals into optical photons, offer a viable solution to this problem. Such transducers are being developed using Diamond Optomechanical Crystals (Diamond OMCs) with embedded Nitrogen-Vacancy (NV) Centers, where efficient coupling to a photonic waveguide is critical for performance. We report a high-precision method to place a diamond crystal on a SiN waveguide using a tungsten probe. Optical characterization via a coupled fiber confirms the successful integration, as the photoluminescence spectrum shows both the NV center's zero-phonon line and a distinct cavity resonance peak. This achievement demonstrates reproducible optical access to the NV centers within the diamond OMC via the waveguide, marking a significant advance toward the construction of efficient and scalable quantum transducers.