Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Gauge-invariant thermal-gradient phase offsets in magnetic Josephson interferometers

Ju Hyung Lee

Published Mar 27, 2026• 0 citations
Publisher

Abstract

This preprint presents a conservative effective field theory (EFT) for superconducting circuits subject to spatially varying nonequilibrium thermal gradients. The manuscript develops a minimal gauge-invariant framework in which the superconducting phase, the electromagnetic gauge field, and a coarse-grained nonequilibrium control scalar are treated as low-energy degrees of freedom. Within this framework, the leading symmetry-allowed coupling between the control-field gradient and the gauge-invariant phase gradient is derived and shown to produce a modified Josephson response. The central result is a predicted phase offset in Josephson weak links and SQUID-type architectures, together with a characteristic phase-quadrature signature that is distinct from ordinary heating-induced critical-current suppression. In particular, the proposed response appears in the cos⁡Δφ quadrature, whereas conventional thermal amplitude effects primarily enter through the sin⁡Δφ channel. The manuscript includes: a minimal gauge-invariant EFT construction for superconducting circuits under nonequilibrium thermal gradients derivation of the modified Josephson current-phase relation with an induced phase offset consistency checks including the uniform-field limit, Ward identities, and stability/positivity bounds order-of-magnitude detectability estimates for SQUID and Josephson-array platforms experimental discrimination strategies, including lock-in detection, gradient reversal, and arm-exchange controls, to distinguish genuine phase offsets from asymmetric heating artifacts This work is intended as a conservative, testable low-energy theory for phase-coherent superconducting circuits, rather than as a microscopic reformulation of superconductivity. The thermal-control scalar used in the analysis is treated as a coarse-grained operational field, with σ=ln⁡(T/T0) introduced only as a practical proxy for device-level estimates. Keywords: superconducting circuits, Josephson effect, SQUID, nonequilibrium thermal gradients, gauge invariance, effective field theory, quantum sensors

DOI
10.5281/zenodo.19244307

Related papers

Optimal phase bias in superconducting interferometers

Alberto Ronzani

A superconducting condensate is characterized by the emergence of macroscopic and collective order, established between its constituent electrons. The degree of correlation at a given spatial position is a complex scalar: it is characterized both by an amplitude (proportional to the minimal energy to generate a fundamental excitation) and a complex phase. Through its gradient, the latter enables the flow of the condensate, demonstrating the quantum fingerprint of superconductivity. Superconductors exhibit strong coupling to electromagnetic fields, so that phase-dependent dissipationless transport through “weak link” circuital elements is easily manipulated by applying voltage or magnetic flux bias to superconducting terminals and loops, respectively. For these reasons, superconducting electronics is nowadays a core technology to enable robust access and manipulation of the fundamental degrees of freedom in quantum devices, from ultrasensitive electromagnetic sensors to superconducting qubits. In this work, we explore different designs of micro-magnetometers based on superconducting interferometers. Differently from conventional designs based on Superconductor, Insulator, Superconductor (SIS) tunnel junctions, here the core elements are nanoscale diffusive metal wires acting as superconducting weak links. These consist in circuital dishomogeneities that can be fabricated over scales much smaller than typical superconductor coherence lengths, typically yielding unique response properties. On the other hand, their intrinsic transparency is usually associated with strong supercurrent concentration, which can severely limit their practicality due to superconducting depairing and thermal-driven hysteresis upon switching to the dissipative regime. In this thesis we demonstrate how a judicious use of nanofabricated designs makes it possible to counter these drawbacks and achieve complete phase polarization in interferometers based on diffusive weak links. The resulting micro-magnetometers are characterized by extremely high magnetic responsivity.

•Jan 1, 2019•0 citations

Coherence properties of superconducting flux qubits

Samuele Spilla

The research work discussed in this thesis deals with the study of superconducting Josephson qubits. Superconducting qubits are solid-state artificial atoms which are based on lithographically defined Josephson tunnel junctions properties. When sufficiently cooled, these superconducting devices exhibit quantized states of charge, flux or junction phase depending on their design parameters. This allows to observe coherent evolutions of their states. The results presented can be divided into two parts. In a first part we investigate operations of superconducting qubits based on the quantum coherence in superconducting quantum interference devices (SQUID). We explain experimental data which has been observed in a SQUID subjected to fast, large-amplitude modifications of its effective potential shape. The motivations for this work come from the fact that in the past few years there have been attempts to interpret the supposed quantum behavior of physical systems, such as Josephson devices, within a classical framework. Moreover, we analyze the possibility of generating GHZ states, namely maximally entangled states, in a quantum system made out of three Josephson qubits. In particular, we investigate the possible limitations of the GHZ state generation due to coupling to bosonic baths. In the second part of the thesis we address a particular cause of decoherence of flux qubits which has been disregarded until now: thermal gradients, which can arise due to accidental non equilibrium quasiparticle distributions. The reason for these detrimental effects is that heat currents flowing through Josephson tunnel junctions in response to a temperature gradient are periodic functions of the phase difference between the electrodes. The phase dependence of the heat current comes from Andreev reflection, namely an interplay between the quasiparticles which carry heat and the superconducting condensate which is sensitive to the superconducting phase difference. Generally speaking, the flux qubit states are characterized by different values of the phase difference through their Josephson junctions. Consequently, the phase-dependent thermal current through a device subject a temperature gradient is related to the phase-dependent qubit states. We study how the thermal currents change according to the state of the qubits hence yielding a measurement of the qubit state. This in turn leads to an impact of temperature gradient on the dynamics of the system. We show that flux qubits in the Delft qubit design can have limitations of the decoherence time to the order of microseconds as a result of this newly discovered source of decoherence. In contrast, the fluxonium qubit is found to be well protected due to its superinductance.

•Feb 16, 2015•0 citations

Josephson circuits for protected quantum bits

Wen-Sen Lu

Over the past two decades the performance of superconducting quantum bits (qubits) has been improved tremendously: the coherence time of individual qubits has been increased by five orders of magnitude, from a few nanoseconds to >100 μs. The much-improved coherence, lithographic scalability, and compatibility with microwave control place superconducting qubits in the leading position in the race amongst several quantum systems being considered for quantum information processing. Despite this very impressive progress, experimental realization of quantum error corrections and demonstration of logical qubits remains a considerable challenge.One of possible solutions to this problem is the development of so-called protected qubits whose errors would be suppressed by special symmetries of the underlying Hamiltonian. The realization of such qubits requires elements not found in the conventional superconducting circuit toolbox, such as Josephson elements with cos(ϕ/2) and cos(2ϕ) dependences of the Josephson energy E_J on the phase difference ϕ, circuits with a very large kinetic inductance, and junctions with unusually low E_J.This thesis focuses on design, fabrication and characterization of circuits based on low-E_J Josephson junctions (JJs) and superinductors (SIs). By analyzing limitations on the junction performance imposed by the thermally activated phase slips, we observed a dramatic reduction of the critical currents in the regime E_J≤T which was accompanied by an increase of the zero-bias resistance R_0. The first part of this work provides practical considerations for the use of such junctions in quantum circuits. With the aim of improving elements with a very high kinetic inductance, in the second part we developed superinductors based on the granular Aluminum (grAl) films, in which Josephson junctions are realized between nanoscale grains. The circuits based on such SIs demonstrate low microwave losses at ultra-low temperatures. Superinductors are an essential element of a novel qubit that we have developed – the so-called bifluxon. The qubit consists of a Cooper-pair box (CPB) with low-E_J Josephson junctions shunted by a superinductor, thus forming a superconducting loop. When the loop is threaded by the magnetic flux Φ=Φ_0⁄2 where Φ_0 is the flux quantum, the qubit offers exponential suppression of energy decay from charge and flux noises, and dephasing from flux noise. In the last part of this work, we observed an increase of the energy relaxation time by two orders of magnitude, up to 100μs, by turning on protection in the bifluxon qubit.

•Jan 1, 2021•1 citation

A Josephson–SQUID Barrier-Clock Diagnostic for the Residual Clock–Energy Framework

Byoungwoo Lee

This record contains Version v0.6r2 of *A Josephson–SQUID Barrier-Clock Diagnostic for the Residual Clock–Energy Framework*. This version is a synthetic-noise sensitivity and application-readiness update to the earlier Josephson–SQUID executable diagnostic line. This manuscript is not an empirical detection paper, not a proposal for a new Josephson law, and not a replacement for standard Josephson/SQUID physics. Instead, it develops a residual phase-clock covariance diagnostic built on standard Josephson/SQUID baseline physics, RCSJ-style phase dynamics, tunneling-opacity language, and mock-data sensitivity calibration. The diagnostic is organized around the flux-control parameter $$u=\frac{\Phi_{\rm ext}}{\Phi_0},$$ and the observable vector $$u\longmapsto\left(I_c(u),\Gamma_\phi(u),\frac{\delta\nu_{\rm osc}}{\nu_{\rm osc}}(u),S_{\phi\phi}(\omega;u)\right).$$ Here \(I_c\) is the critical current, \(\Gamma_\phi\) is a phase-dephasing rate, \(\delta\nu_{\rm osc}/\nu_{\rm osc}\) is a fractional oscillator or clock-frequency shift, and \(S_{\phi\phi}\) is a phase-noise spectral density. The Residual Clock–Energy input is represented by the residual phase-tension one-form $$\alpha=d\Phi-A,$$ which is compared with the gauge-invariant superconducting phase difference $$\phi=\varphi_1-\varphi_2-\frac{2\pi}{\Phi_0}\int_1^2 A\cdot d\ell .$$ The earlier v0.5r2 version introduced a positive-control toy residual drive, $$\mathcal R_J(u)=r_0\sin^2(\pi u),$$ and used it as a morphology target for baseline-subtracted Josephson/SQUID observables. Version v0.6r2 extends this line by injecting synthetic noise and nuisance morphologies into mock observations, $$y_{k,i}^{\rm obs}(A)=A\beta_k g_i+n_{k,i}+h_{k,i},$$ where \(g_i\) is the centered residual morphology, \(n_{k,i}\) is a synthetic noise term, and \(h_{k,i}\) is a nuisance contribution. The central sensitivity outputs are the detection probability, $$P_{\rm det}(A)=\frac{1}{N_{\rm MC}}\sum_{m=1}^{N_{\rm MC}}\mathbf 1[\text{trial }m\text{ passes}],$$ the minimum detectable amplitude, $$A_{\min}=\inf\{A:P_{\rm det}(A)\ge0.95\},$$ and the false-positive rate, $$P_{\rm FP}=P_{\rm det}(0).$$ Version v0.6r2 includes: 1. synthetic observation models for residual and nuisance channels;2. white-noise, high-noise, correlated-drift, heating-mimic, and mixed-nuisance scenarios;3. morphology-score and signal-to-noise recovery criteria;4. a multi-channel admission rule requiring at least two non-current channels to pass;5. matched-control subtraction for heating-like nuisance;6. false-positive and detection-probability curves;7. sensitivity tables and CSV outputs;8. an application-readiness ladder from toy positive control to device-screening protocol;9. laboratory deployment requirements for a future calibrated experiment;10. device-facing output interpretation tables. A key outcome of the synthetic study is that heating-like nuisance can overlap strongly with the residual morphology and can therefore create false-positive hazards if not controlled. The v0.6r2 update explicitly treats this issue by introducing matched-control subtraction and by distinguishing raw nuisance-contaminated recovery from controlled recovery. The application-readiness ladder used in this version is: - L0: toy positive-control morphology;- L1: synthetic-noise recovery and false-positive stress test;- L2: calibrated synthetic noise using measured device noise floors;- L3: laboratory pilot with real Josephson/SQUID data;- L4: device-screening protocol for phase-noise and barrier-quality diagnostics. The current v0.6r2 manuscript is positioned at L1. It is therefore a synthetic sensitivity and application-readiness note, not a calibrated laboratory demonstration. The included files provide the PDF manuscript, LaTeX source, figure-generation script, synthetic sensitivity summary CSV, detection-curve CSV, matched-control example CSV, simulation metadata JSON, and a source bundle for reproducibility. This work is a companion device-facing diagnostic note following the broader protocol record *Prediction and Discriminating Experiments for the Residual Clock–Energy Framework*, Version v0.4r1, DOI: 10.5281/zenodo.19846816.

•Apr 28, 2026•0 citations

Variable superconducting quantum-interference device: Theory

H. J. Fink, V. Grünfeld, S. M. Roberts

A dc superconducting quantum interference device (SQUID) consisting of a symmetric ring circuit with four Josephson junctions and two independent external currents ${I}_{1}$ and ${I}_{2}$, which enter the circuit at different points, has a phase boundary between the fully superconducting and the normal states that is different from that of a conventional SQUID. The control current ${I}_{2}$ modifies the magnetic flux (\ensuremath{\varphi}) periodicity and the value of the maximum measuring current ${I}_{1m}$(\ensuremath{\varphi}). For values of ${I}_{2}$>${I}_{c}$ (critical current of Josephson junction) the fully resistive state exists over flux intervals centered around (n+(1/2)${\ensuremath{\varphi}}_{0}$, where n is an integer and ${\ensuremath{\varphi}}_{0}$ is the fluxoid quantum. A superconducting circuit without Josephson junctions is suggested which should have a phase boundary similar to that found here. Minimization procedures which are usually employed in analyzing SQUID's are discussed.

Physical review. B, Condensed matter•Jul 1, 1987•5 citations

Microwave_Cavity_with_SQUID-Tunable_Frequency

Walter Ayala

Version 4.1 presents an integral theoretical, electromagnetic, experimental, statistical, vali-dation, and reproducibility framework for a microwave cavity incorporating a SuperconductingQuantum Interference Device (SQUID) as a flux-tunable superconducting element.The architecture combines a low-loss microwave resonator, a superconducting SQUID, aflux-bias line, cryogenic microwave input/output circuitry, magnetic shielding, and calibratedmeasurement electronics.The central physical mechanism is the flux dependence of the effective Josephson inductanceof the SQUID. For a symmetric two-junction SQUID operated in the low-current regime, the effectivecritical current is modeled asIc,eff(Φ) = 2Ic0⃓⃓⃓⃓cos (︃πΦΦ0)︃⃓⃓⃓⃓, (1)leading to the effective Josephson inductanceLJ,eff(Φ) = Φ02πIc,eff(Φ) =Φ04πIc0 |cos(πΦ/Φ0)|. (2)For a lumped-element approximation,ωc(Φ) = 1√︁[Lg + LJ,eff(Φ)]Ceff, (3)where Lg is the geometric inductance and Ceff includes the relevant geometric, junction,stray, and parasitic capacitances.Unlike the previous version, the physical junction capacitance is not assumed to follow thesame |cos(πΦ/Φ0)| law as the effective critical current.Any experimentally observed flux-dependent capacitance is treated as an empirical correctionrequiring independent characterization.The experimental protocol specifies resonance extraction, complex microwave fitting, fluxcalibration, magnetic shielding, noise characterization, quality-factor extraction, uncertaintypropagation, control experiments, cooldown reproducibility, and preregistered acceptancecriteria.No measured tunability, quality factor, noise performance, or device reproducibility isclaimed.

•Sep 24, 2026•0 citations
This preprint presents a conservative effective field theory (EFT) for superconducting circuits subject to spatially varying nonequilibrium thermal gradients. The manuscript develops a minimal gauge-invariant framework in which the superconducting phase, the electromagnetic gauge field, and a coarse-grained nonequilibrium control scalar are treated as low-energy degrees of freedom. Within this framework, the leading symmetry-allowed coupling between the control-field gradient and the gauge-invariant phase gradient is derived and shown to produce a modified Josephson response. The central result is a predicted phase offset in Josephson weak links and SQUID-type architectures, together with a characteristic phase-quadrature signature that is distinct from ordinary heating-induced critical-current suppression. In particular, the proposed response appears in the cos⁡Δφ quadrature, whereas conventional thermal amplitude effects primarily enter through the sin⁡Δφ channel. The manuscript includes: a minimal gauge-invariant EFT construction for superconducting circuits under nonequilibrium thermal gradients derivation of the modified Josephson current-phase relation with an induced phase offset consistency checks including the uniform-field limit, Ward identities, and stability/positivity bounds order-of-magnitude detectability estimates for SQUID and Josephson-array platforms experimental discrimination strategies, including lock-in detection, gradient reversal, and arm-exchange controls, to distinguish genuine phase offsets from asymmetric heating artifacts This work is intended as a conservative, testable low-energy theory for phase-coherent superconducting circuits, rather than as a microscopic reformulation of superconductivity. The thermal-control scalar used in the analysis is treated as a coarse-grained operational field, with σ=ln⁡(T/T0) introduced only as a practical proxy for device-level estimates. Keywords: superconducting circuits, Josephson effect, SQUID, nonequilibrium thermal gradients, gauge invariance, effective field theory, quantum sensors
A superconducting condensate is characterized by the emergence of macroscopic and collective order, established between its constituent electrons. The degree of correlation at a given spatial position is a complex scalar: it is characterized both by an amplitude (proportional to the minimal energy to generate a fundamental excitation) and a complex phase. Through its gradient, the latter enables the flow of the condensate, demonstrating the quantum fingerprint of superconductivity. Superconductors exhibit strong coupling to electromagnetic fields, so that phase-dependent dissipationless transport through “weak link” circuital elements is easily manipulated by applying voltage or magnetic flux bias to superconducting terminals and loops, respectively. For these reasons, superconducting electronics is nowadays a core technology to enable robust access and manipulation of the fundamental degrees of freedom in quantum devices, from ultrasensitive electromagnetic sensors to superconducting qubits. In this work, we explore different designs of micro-magnetometers based on superconducting interferometers. Differently from conventional designs based on Superconductor, Insulator, Superconductor (SIS) tunnel junctions, here the core elements are nanoscale diffusive metal wires acting as superconducting weak links. These consist in circuital dishomogeneities that can be fabricated over scales much smaller than typical superconductor coherence lengths, typically yielding unique response properties. On the other hand, their intrinsic transparency is usually associated with strong supercurrent concentration, which can severely limit their practicality due to superconducting depairing and thermal-driven hysteresis upon switching to the dissipative regime. In this thesis we demonstrate how a judicious use of nanofabricated designs makes it possible to counter these drawbacks and achieve complete phase polarization in interferometers based on diffusive weak links. The resulting micro-magnetometers are characterized by extremely high magnetic responsivity.
The research work discussed in this thesis deals with the study of superconducting Josephson qubits. Superconducting qubits are solid-state artificial atoms which are based on lithographically defined Josephson tunnel junctions properties. When sufficiently cooled, these superconducting devices exhibit quantized states of charge, flux or junction phase depending on their design parameters. This allows to observe coherent evolutions of their states. The results presented can be divided into two parts. In a first part we investigate operations of superconducting qubits based on the quantum coherence in superconducting quantum interference devices (SQUID). We explain experimental data which has been observed in a SQUID subjected to fast, large-amplitude modifications of its effective potential shape. The motivations for this work come from the fact that in the past few years there have been attempts to interpret the supposed quantum behavior of physical systems, such as Josephson devices, within a classical framework. Moreover, we analyze the possibility of generating GHZ states, namely maximally entangled states, in a quantum system made out of three Josephson qubits. In particular, we investigate the possible limitations of the GHZ state generation due to coupling to bosonic baths. In the second part of the thesis we address a particular cause of decoherence of flux qubits which has been disregarded until now: thermal gradients, which can arise due to accidental non equilibrium quasiparticle distributions. The reason for these detrimental effects is that heat currents flowing through Josephson tunnel junctions in response to a temperature gradient are periodic functions of the phase difference between the electrodes. The phase dependence of the heat current comes from Andreev reflection, namely an interplay between the quasiparticles which carry heat and the superconducting condensate which is sensitive to the superconducting phase difference. Generally speaking, the flux qubit states are characterized by different values of the phase difference through their Josephson junctions. Consequently, the phase-dependent thermal current through a device subject a temperature gradient is related to the phase-dependent qubit states. We study how the thermal currents change according to the state of the qubits hence yielding a measurement of the qubit state. This in turn leads to an impact of temperature gradient on the dynamics of the system. We show that flux qubits in the Delft qubit design can have limitations of the decoherence time to the order of microseconds as a result of this newly discovered source of decoherence. In contrast, the fluxonium qubit is found to be well protected due to its superinductance.
Over the past two decades the performance of superconducting quantum bits (qubits) has been improved tremendously: the coherence time of individual qubits has been increased by five orders of magnitude, from a few nanoseconds to >100 μs. The much-improved coherence, lithographic scalability, and compatibility with microwave control place superconducting qubits in the leading position in the race amongst several quantum systems being considered for quantum information processing. Despite this very impressive progress, experimental realization of quantum error corrections and demonstration of logical qubits remains a considerable challenge.One of possible solutions to this problem is the development of so-called protected qubits whose errors would be suppressed by special symmetries of the underlying Hamiltonian. The realization of such qubits requires elements not found in the conventional superconducting circuit toolbox, such as Josephson elements with cos(ϕ/2) and cos(2ϕ) dependences of the Josephson energy E_J on the phase difference ϕ, circuits with a very large kinetic inductance, and junctions with unusually low E_J.This thesis focuses on design, fabrication and characterization of circuits based on low-E_J Josephson junctions (JJs) and superinductors (SIs). By analyzing limitations on the junction performance imposed by the thermally activated phase slips, we observed a dramatic reduction of the critical currents in the regime E_J≤T which was accompanied by an increase of the zero-bias resistance R_0. The first part of this work provides practical considerations for the use of such junctions in quantum circuits. With the aim of improving elements with a very high kinetic inductance, in the second part we developed superinductors based on the granular Aluminum (grAl) films, in which Josephson junctions are realized between nanoscale grains. The circuits based on such SIs demonstrate low microwave losses at ultra-low temperatures. Superinductors are an essential element of a novel qubit that we have developed – the so-called bifluxon. The qubit consists of a Cooper-pair box (CPB) with low-E_J Josephson junctions shunted by a superinductor, thus forming a superconducting loop. When the loop is threaded by the magnetic flux Φ=Φ_0⁄2 where Φ_0 is the flux quantum, the qubit offers exponential suppression of energy decay from charge and flux noises, and dephasing from flux noise. In the last part of this work, we observed an increase of the energy relaxation time by two orders of magnitude, up to 100μs, by turning on protection in the bifluxon qubit.
This record contains Version v0.6r2 of *A Josephson–SQUID Barrier-Clock Diagnostic for the Residual Clock–Energy Framework*. This version is a synthetic-noise sensitivity and application-readiness update to the earlier Josephson–SQUID executable diagnostic line. This manuscript is not an empirical detection paper, not a proposal for a new Josephson law, and not a replacement for standard Josephson/SQUID physics. Instead, it develops a residual phase-clock covariance diagnostic built on standard Josephson/SQUID baseline physics, RCSJ-style phase dynamics, tunneling-opacity language, and mock-data sensitivity calibration. The diagnostic is organized around the flux-control parameter u=ΦextΦ0,u=\frac{\Phi_{\rm ext}}{\Phi_0},u=Φ0​Φext​​, and the observable vector u⟼(Ic(u),Γϕ(u),δνoscνosc(u),Sϕϕ(ω;u)).u\longmapsto\left(I_c(u),\Gamma_\phi(u),\frac{\delta\nu_{\rm osc}}{\nu_{\rm osc}}(u),S_{\phi\phi}(\omega;u)\right).u⟼(Ic​(u),Γϕ​(u),νosc​δνosc​​(u),Sϕϕ​(ω;u)). Here IcI_cIc​ is the critical current, Γϕ\Gamma_\phiΓϕ​ is a phase-dephasing rate, δνosc/νosc\delta\nu_{\rm osc}/\nu_{\rm osc}δνosc​/νosc​ is a fractional oscillator or clock-frequency shift, and SϕϕS_{\phi\phi}Sϕϕ​ is a phase-noise spectral density. The Residual Clock–Energy input is represented by the residual phase-tension one-form α=dΦ−A,\alpha=d\Phi-A,α=dΦ−A, which is compared with the gauge-invariant superconducting phase difference ϕ=φ1−φ2−2πΦ0∫12A⋅dℓ.\phi=\varphi_1-\varphi_2-\frac{2\pi}{\Phi_0}\int_1^2 A\cdot d\ell .ϕ=φ1​−φ2​−Φ0​2π​∫12​A⋅dℓ. The earlier v0.5r2 version introduced a positive-control toy residual drive, RJ(u)=r0sin⁡2(πu),\mathcal R_J(u)=r_0\sin^2(\pi u),RJ​(u)=r0​sin2(πu), and used it as a morphology target for baseline-subtracted Josephson/SQUID observables. Version v0.6r2 extends this line by injecting synthetic noise and nuisance morphologies into mock observations, yk,iobs(A)=Aβkgi+nk,i+hk,i,y_{k,i}^{\rm obs}(A)=A\beta_k g_i+n_{k,i}+h_{k,i},yk,iobs​(A)=Aβk​gi​+nk,i​+hk,i​, where gig_igi​ is the centered residual morphology, nk,in_{k,i}nk,i​ is a synthetic noise term, and hk,ih_{k,i}hk,i​ is a nuisance contribution. The central sensitivity outputs are the detection probability, Pdet(A)=1NMC∑m=1NMC1[trial m passes],P_{\rm det}(A)=\frac{1}{N_{\rm MC}}\sum_{m=1}^{N_{\rm MC}}\mathbf 1[\text{trial }m\text{ passes}],Pdet​(A)=NMC​1​∑m=1NMC​​1[trial m passes], the minimum detectable amplitude, Amin⁡=inf⁡{A:Pdet(A)≥0.95},A_{\min}=\inf\{A:P_{\rm det}(A)\ge0.95\},Amin​=inf{A:Pdet​(A)≥0.95}, and the false-positive rate, PFP=Pdet(0).P_{\rm FP}=P_{\rm det}(0).PFP​=Pdet​(0). Version v0.6r2 includes: 1. synthetic observation models for residual and nuisance channels;2. white-noise, high-noise, correlated-drift, heating-mimic, and mixed-nuisance scenarios;3. morphology-score and signal-to-noise recovery criteria;4. a multi-channel admission rule requiring at least two non-current channels to pass;5. matched-control subtraction for heating-like nuisance;6. false-positive and detection-probability curves;7. sensitivity tables and CSV outputs;8. an application-readiness ladder from toy positive control to device-screening protocol;9. laboratory deployment requirements for a future calibrated experiment;10. device-facing output interpretation tables. A key outcome of the synthetic study is that heating-like nuisance can overlap strongly with the residual morphology and can therefore create false-positive hazards if not controlled. The v0.6r2 update explicitly treats this issue by introducing matched-control subtraction and by distinguishing raw nuisance-contaminated recovery from controlled recovery. The application-readiness ladder used in this version is: - L0: toy positive-control morphology;- L1: synthetic-noise recovery and false-positive stress test;- L2: calibrated synthetic noise using measured device noise floors;- L3: laboratory pilot with real Josephson/SQUID data;- L4: device-screening protocol for phase-noise and barrier-quality diagnostics. The current v0.6r2 manuscript is positioned at L1. It is therefore a synthetic sensitivity and application-readiness note, not a calibrated laboratory demonstration. The included files provide the PDF manuscript, LaTeX source, figure-generation script, synthetic sensitivity summary CSV, detection-curve CSV, matched-control example CSV, simulation metadata JSON, and a source bundle for reproducibility. This work is a companion device-facing diagnostic note following the broader protocol record *Prediction and Discriminating Experiments for the Residual Clock–Energy Framework*, Version v0.4r1, DOI: 10.5281/zenodo.19846816.
A dc superconducting quantum interference device (SQUID) consisting of a symmetric ring circuit with four Josephson junctions and two independent external currents I1{I}_{1}I1​ and I2{I}_{2}I2​, which enter the circuit at different points, has a phase boundary between the fully superconducting and the normal states that is different from that of a conventional SQUID. The control current I2{I}_{2}I2​ modifies the magnetic flux (\ensuremath{\varphi}) periodicity and the value of the maximum measuring current I1m{I}_{1m}I1m​(\ensuremath{\varphi}). For values of I2{I}_{2}I2​>Ic{I}_{c}Ic​ (critical current of Josephson junction) the fully resistive state exists over flux intervals centered around (n+(1/2)${\ensuremath{\varphi}}_{0}$, where n is an integer and ${\ensuremath{\varphi}}_{0}$ is the fluxoid quantum. A superconducting circuit without Josephson junctions is suggested which should have a phase boundary similar to that found here. Minimization procedures which are usually employed in analyzing SQUID's are discussed.
Version 4.1 presents an integral theoretical, electromagnetic, experimental, statistical, vali-dation, and reproducibility framework for a microwave cavity incorporating a SuperconductingQuantum Interference Device (SQUID) as a flux-tunable superconducting element.The architecture combines a low-loss microwave resonator, a superconducting SQUID, aflux-bias line, cryogenic microwave input/output circuitry, magnetic shielding, and calibratedmeasurement electronics.The central physical mechanism is the flux dependence of the effective Josephson inductanceof the SQUID. For a symmetric two-junction SQUID operated in the low-current regime, the effectivecritical current is modeled asIc,eff(Φ) = 2Ic0⃓⃓⃓⃓cos (︃πΦΦ0)︃⃓⃓⃓⃓, (1)leading to the effective Josephson inductanceLJ,eff(Φ) = Φ02πIc,eff(Φ) =Φ04πIc0 |cos(πΦ/Φ0)|. (2)For a lumped-element approximation,ωc(Φ) = 1√︁[Lg + LJ,eff(Φ)]Ceff, (3)where Lg is the geometric inductance and Ceff includes the relevant geometric, junction,stray, and parasitic capacitances.Unlike the previous version, the physical junction capacitance is not assumed to follow thesame |cos(πΦ/Φ0)| law as the effective critical current.Any experimentally observed flux-dependent capacitance is treated as an empirical correctionrequiring independent characterization.The experimental protocol specifies resonance extraction, complex microwave fitting, fluxcalibration, magnetic shielding, noise characterization, quality-factor extraction, uncertaintypropagation, control experiments, cooldown reproducibility, and preregistered acceptancecriteria.No measured tunability, quality factor, noise performance, or device reproducibility isclaimed.