What happens to quantum measurement fidelity when gravitational fields shift beneath nano-scale sensors? This research examined thermal noise signatures in five distinct nano-scale quantum sensor configurations subjected to controlled gravitational field variations ranging from 0.1g to 1.5g. The investigation was carried out at the Quantum Metrology Laboratory of Hyderabad Institute of Advanced Sciences between March 2022 and November 2023. A total of 247 independent measurement cycles were recorded across NV-center diamond sensors, SQUID arrays, optomechanical resonators, ion trap sensors, and atomic magnetometers. Each sensor type was exposed to six gravitational field intensities while thermal noise power spectral density was measured using cryogenic amplification chains operating at 15 mK base temperature. Results showed that optomechanical resonators exhibited the lowest baseline thermal noise at 2.94 pW/√Hz, whereas ion trap sensors recorded the highest at 6.43 pW/√Hz. A non-linear relationship between gravitational field strength and noise amplitude was observed, with noise escalation rates varying between 1.87 pW at 0.1g and 7.31 pW at 1.5g. Detection sensitivity dropped from 98.3% at minimal gravitational influence to 68.4% under 1.5g conditions. The correlation coefficient between gravitational field intensity and thermal noise output was 0.937 (p< 0.001). These findings point toward a gravitational-dependent noise floor that has been largely overlooked in prior sensor calibration models. The data may help recalibrate quantum sensing protocols for environments with variable gravitational conditions, including space-based platforms and deep underground laboratories.
What happens to quantum measurement fidelity when gravitational fields shift beneath nano-scale sensors? This research examined thermal noise signatures in five distinct nano-scale quantum sensor configurations subjected to controlled gravitational field variations ranging from 0.1g to 1.5g. The investigation was carried out at the Quantum Metrology Laboratory of Hyderabad Institute of Advanced Sciences between March 2022 and November 2023. A total of 247 independent measurement cycles were recorded across NV-center diamond sensors, SQUID arrays, optomechanical resonators, ion trap sensors, and atomic magnetometers. Each sensor type was exposed to six gravitational field intensities while thermal noise power spectral density was measured using cryogenic amplification chains operating at 15 mK base temperature. Results showed that optomechanical resonators exhibited the lowest baseline thermal noise at 2.94 pW/√Hz, whereas ion trap sensors recorded the highest at 6.43 pW/√Hz. A non-linear relationship between gravitational field strength and noise amplitude was observed, with noise escalation rates varying between 1.87 pW at 0.1g and 7.31 pW at 1.5g. Detection sensitivity dropped from 98.3% at minimal gravitational influence to 68.4% under 1.5g conditions. The correlation coefficient between gravitational field intensity and thermal noise output was 0.937 (p< 0.001). These findings point toward a gravitational-dependent noise floor that has been largely overlooked in prior sensor calibration models. The data may help recalibrate quantum sensing protocols for environments with variable gravitational conditions, including space-based platforms and deep underground laboratories.
The characterization of systematic decoherence backgrounds in solid-state quantum sensors constitutes a fundamental metrological challenge: model uncertainties on conventional decoherence sources (δΓ_model ∼ 2–5 Hz) exceed by orders of magnitude the precision required for emerging applications in quantum sensing, including proposals for ultralight dark matter detection where signal rates ΓDM ≲ 10⁻⁶ Hz demand fractional precisions of 10⁻⁶ to 10⁻¹¹. This work introduces Quantum Differential Decoherence Spectroscopy (QDIFF), a measurement methodology employing paired nitrogen-vacancy (NV) center diamond sensors that differ only in a controlled variable—primarily the crystallographic orientation of the NV axis—while sharing an identical cryogenic environment (T < 20 mK). By subtracting simultaneous decoherence rate measurements, QDIFF cancels common-mode systematics without requiring explicit background modeling. A rigorous quantitative analysis of residual noise channels—including thermal fluctuations, surface two-level systems (TLS), electromagnetic interference, measurement back-action, cross-correlations, and the systematic uncertainty of the additive Lindblad decomposition itself (α ≈ 0.15–0.30)—demonstrates improvement factors of 3–12× over absolute single-sensor measurements, depending on the dominant noise channel and fabrication scenario. The resulting residual floor (δΓ_residual ≈ 0.42–7.6 Hz) establishes QDIFF as a metrological tool for quantifying the irreducible systematic uncertainty floor in differential quantum sensors, while honestly acknowledging that direct competition with dedicated ultralight dark matter detectors (CASPEr, ABRACADABRA) remains out of reach. The explicit propagation of model-framework uncertainty constitutes a methodological standard for future proposals in differential quantum sensing.
Abstract Recent advances in quantum sensing—optical clocks at 5.5 × 10 − 19 systematic uncertainty, frequency-dependent squeezing below the standard quantum limit, quantum magnetometers approaching fundamental sensitivity limits—raise a natural question: can these technologies detect gravitational waves directly, or enhance existing detectors beyond current capabilities? We show that the answer is primarily determined by the coupling mechanism between the gravitational wave and the sensor. Starting from the tidal Hamiltonian in Fermi normal coordinates, we identify three physically distinct mechanisms by which a gravitational wave couples directly to a quantum system, and derive their transducer gains within linearized general relativity and non-relativistic quantum mechanics. Internal atomic coupling (tidal distortion of electronic wavefunctions) yields a transducer gain G A = 2.4 × 10 − 20 , with vanishing first-order energy shifts for all J = 0 clock states—a ∼ 10 35 deficit relative to laser interferometry that exceeds any projected quantum enhancement. Center-of-mass coupling (Doppler shifts from geodesic motion) reaches strain sensitivities of ∼ 10 − 18 , still 10 4 above LISA requirements. Light propagation coupling (phase accumulation over macroscopic baselines) provides the enormous transducer gain that makes laser interferometry—and atom interferometry—viable. For detectors exploiting this third mechanism, we quantify how much improvement quantum sensors can provide through the detector’s noise architecture: LISA’s noise budget is predominantly classical, limiting combined quantum enhancement to E ≈ 1.04 , while ground-based detectors in the shot-noise-dominated regime achieve E = 1.6 – 2.1 . Atom interferometers exploit the same light-propagation mechanism to target the 0.01–10 Hz band between the LISA and LIGO ranges.
Quantum sensing is moving from isolated laboratory demonstrations to deployable timing, navigation, geophysical, biomedical, industrial, and communication subsystems embedded in larger classical-quantum stacks. Extending our 2018–2022 baseline review, this survey reassesses experimentally demonstrated quantum sensing reported during 2023–2025 with an explicit systems lens focused on interoperability, calibration, deployment, and procurement readiness. Following a PRISMA-guided protocol, six databases were searched in August 2025. The search produced 596 records; 144 remained after the abstract screening and 73 unique studies were retained for full analysis. The evidence shows seven experiment-proven technology classes by 2025: nitrogen-vacancy (NV) and magnetic resonance spins; photonic sensors and integrated photonics; ion trap and optical lattice clocks; superconducting and quantum-dot devices; non-Hermitian/exceptional point (EP) sensors; optomechanical/mechanical sensors; and quantum critical/many-body platforms. NV/magnetic resonance and photonic approaches remain the most mature at the systems level, while ion trap and optical lattice devices show substantial growth, and three categories—EP, optomechanical, and quantum critical sensors emerge as credible new experimental families. Across applications the strongest usability signal is no longer peak laboratory sensitivity alone, but stable integration with classical electronics, photonics, packaging, calibration, and standards. The review maps technology-readiness trends across six application domains and highlights the main changes since 2022: broader database indexing, greater modality diversity, more field-oriented demonstrations, and a stronger transition toward the TRL 4–7 band. We conclude with the main commercialization bottlenecks and a roadmap for benchmarked, interoperable, and pilot-ready quantum sensing systems.
Noise spectroscopy with quantum sensors is a powerful tool for characterising the properties of the sensor environment and detecting critical magnetic phenomena. While replacing single sensors with large ensembles promises substantial gains in measurement sensitivity and field of view, the output becomes difficult to interpret when there is a variable coupling to targets across the sensing ensemble. In this work we present an analysis procedure for accessing the true source noise spectrum using ensemble coherence from dynamical decoupling measurements. We show that sequence timing plays a dual role in ensemble noise spectroscopy, setting both the frequency selectivity and the weighted collection of signal across the ensemble, and demonstrate how incorporation of the coupling distribution allows accurate parameter extraction of the noise. We apply this procedure to a model system, shallow nitrogen-vacancy centres in diamond, and show that consistent information about the spectral character of MHz-range surface noise can be obtained from two sensing ensembles featuring distinct depth distributions. Our results pave the way for using large quantum sensor ensembles for quantitative, broadband noise spectroscopy, with straightforward extension to other solid-state and molecular sensing platforms.
Laboratory-based experimental tests remain a central challenge in the study of the quantum-gravity interface. We present a quantitative, experimentally testable prediction for gravitationally induced quantum decoherence of spatial superpositions in levitated optomechanical systems. Starting from two independently well-tested physical elements—the quantum nature of material energy-momentum fluctuations (established in particle physics) and the linear response kernel of classical geometry (derived from the weak-field limit of general relativity and verified by gravitational-wave observations)—and supplementing them with a minimal extension postulate for superposition states, we obtain a rigid scaling law for the gravitational decoherence rate: \Gamma \sim G M^2 d^2 / (\hbar L^3) \cdot \Phi(l_*/L), where M is the mass of the object, d the spatial separation of the superposition branches, L the characteristic linear dimension, and \Phi a dimensionless function encoding the unknown ultraviolet cutoff scale l_* of the effective geometric noise. The structural form \Gamma \propto M^2 d^2 / L^3 contains no free adjustable parameters; the overall amplitude is set by the choice of l_*. Identifying l_* with the Planck length \ell_P = \sqrt{\hbar G / c^3}—the only known scale bridging quantum theory and gravity—yields \Phi \sim \mathcal{O}(1) and a specific numerical target. For current levitated nanoparticle experiments (M \sim 10^{-14}\,\text{kg}, d \sim 10^{-7}\,\text{m}, L \sim 10^{-6}\,\text{m}), this Planck-scale hypothesis predicts a decoherence rate of order 1\,\text{Hz}, placing it within the foreseeable sensitivity window of next-generation optomechanical setups. We discuss the exclusive physical signatures distinguishing this mechanism from environmental decoherence channels and outline explicit falsification conditions, providing experimental groups with a concrete target to probe the quantum-gravity interface in the laboratory.
Gravitational waves manifest as a time varying straining of space: they arise from the accelerating motions of large bodies of mass and propagate across the universe at the speed of light as ripples in the fabric of space-time, a fleetingly weak effect so far eluding direct detection. The detection of gravitation waves is expected to yield a rich vein to observational astronomy, complementing existing electromagnetic surveys and revealing a hitherto unexplored range of phenomena. First generation interferometric gravitational wave detectors, notably Enhanced LIGO, achieved strain sensitivities of one part in ten to power twenty-one per square-root-Hertz at 100 Hz with an expected detection rate of 2-3 events per year. Commissioning of a new generation of Advanced LIGO interferometric detectors has concluded recently with a resultant ten-fold sensitivity improvement. Overall their potential event detection space has increased by a factor of 1000. The quantum nature of light within these detectors now limits their sensitivity over most of their frequency range. This quantum noise limit is driven by the vacuum quadrature fluctuations propagated through their open detection ports and represents a fundamental noise floor to their strain sensitivity. This thesis addresses two distinct approaches to quantum noise improvement for future upgrades to advanced detectors. The first addresses the issue of quantum noise by adopting a quantum non-demolition approach to detector readout variables, the so-called `speed-meter’ design. Such a modified instrument samples test mass momentum, a quantity for which time separated measurements commute and are therefore not bound by Heisenberg-like limits. A novel polarisation-folded sloshing cavity type speed-meter is proposed where readout fields are stored and delayed in the orthogonal polarisation of the interferometer’s arms cavities. Here frequency dependence is selected to cancel position like measurements so that only test mass momentum information remains. A quantum noise propagation model is developed and a sensitivity performance is demonstrated that beats the standard quantum limit below 100 Hz over a broad range of frequencies. A second approach to achieve quantum noise enhancement in advanced detectors involves injection of quadrature-squeezed states in the place of vacuum. This dissertation details the development of a prototype squeezed vacuum source suitable to the demanding enhancement requirements for an Advanced LIGO squeezing installation. The construction of a doubly resonant, bow-tie cavity source is presented. This employs a novel monolithic all-glass cavity construction and is vacuum compatible. This design demonstrates the viability of building a cavity using optical contacting as a construction technique for attaching mounting prisms to highly polished fused-silica breadboards. Such a design can be expected to have excellent length noise stability, provide low intrinsic phase noise and would be suitable to mount on seismic isolation stages within the LIGO vacuum envelope. Further, the travelling wave cavity design should provide excellent 50 dB intrinsic backscatter isolation. We demonstrate the first operation of such a complex non-linear device under vacuum, producing 8.6 dB of measured vacuum squeezing down to 10 Hz across the advanced LIGO ‘audio-band’ detection range.