Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Laser & Photonics Review

Hybrid Integration of a Superconducting Nanowire Single‐Photon Detector Directly on the Fiber Facet

Fan Yang, Qingyuan Zhao, Yanghui Huang, Zhen Liu, Jie Deng, Zhenguo Li, Sai‐Ying Ru, Naitao Liu, Yaoyao Pan, Long Wang, Yu Nie, Kanghe Lv, Shunhua Wang, Yichi Gao, Xuecou Tu, Labao Zhang, Xiaoqing Jia, Jian Chen, Le Kang, Peiheng Wu

Published Mar 13, 2026• 2 citations
Publisher

Abstract

ABSTRACT Directly integrating superconducting nanowire single‐photon detectors (SNSPDs) on the fiber facet could significantly reduce coupling loss and alignment uncertainty, enabling an all‐fiber single‐photon detector with high detection efficiency, robust coupling, and compact size. However, the material and mechanical incompatibility between bulky optical fibers and nano‐fabricated ultrathin nanowires makes fabrication and integration challenging. Here, we demonstrate a hybrid integration method that involves fabricating individual membrane‐based detectors and optical mirrors separately, followed by their precise assembly on fiber facets. After integration, the detectors exhibit saturated quantum efficiency, a maximum system detection efficiency of 68.6%, a timing jitter as low as 26 ps, and a counting rate of up to 51.7 Mcps. These performance metrics are comparable to SNSPDs on standard silicon wafers. Moreover, this integration enables a fiber facet coupling regime where the detector is embedded in the guide mode of the incident light, resulting in an exceptionally broad detection bandwidth (1310–1640 nm) with less than 2.3% reduction in efficiency. The successful fiber facet integration of SNSPDs not only provides an alternative coupling strategy but also introduces a single‐photon detection capability into the group of fiber‐integrated optoelectronics, paving the way for low‐loss, long‐range quantum communication and distributed sensing systems.

DOI
10.1002/lpor.202503116

Related papers

Broadband waveguide-integrated superconducting single-photon detectors with high system detection efficiency

Martin A. Wolff, Fabian Beutel, Jonas Schütte +4 more

Fast and efficient detection of single photons with high timing accuracy is a crucial requirement in most quantum optics experiments and enables novel sensing and imaging solutions. Superconducting nanowire single-photon detectors (SNSPD) achieve technology-leading performance in terms of detection efficiency, dark count rate, timing jitter, and detector dead times. However, conventional SNSPDs with high system detection efficiency typically rely on resonant enhancement of the absorption efficiency, thus only achieving attractive detector benchmarks over narrow spectral windows. Waveguide-integrated SNSPDs allow for leveraging the wideband material absorption in superconducting nanowires by absorbing light in a traveling-wave geometry but have been limited to low system detection efficiencies due to interface losses when coupling to optical fibers. Here, we show how high system detection efficiencies of 22%–73% are realized over a broad wavelength range from 532 nm to 1640 nm in a single waveguide-integrated SNSPD device. We accomplish efficient coupling between optical fibers and waveguide-integrated nanowire detectors by employing a 3D interface, produced in direct laser writing, that relies on total internal reflection for achieving a broad transmission bandwidth. We further find low timing jitter of 25.7 ps and detector decay times of 9.8 ns, allowing for single-photon counting with high repetition rates up to 100 MHz. Our work paves the way for an efficient single-photon detector solution that combines the spectral requirements of an extremely wide range of quantum optics experiments in a single device. The coupling approach and SNSPD-integration with nanophotonic circuits are further well-suited for realizing large-scale detector arrays.

Applied Physics Letters•Apr 12, 2021•48 citations

On-fiber assembly of membrane-integrated superconducting-nanowire single-photon detectors

Xiaolong Hu, Faraz Najafi, Jacob Mower +9 more

We directly assemble membrane-integrated superconducting-nanowire single-photon detectors (SNSPDs) on optical fiber-ferrule facets, yielding extremely compact, fiber-coupled SNSPD systems. Our initial demonstration shows 1% system detection efficiency, which can be further improved significantly.

Frontiers in Optics•Jan 1, 2013•1 citation

Fiber‐Integrated Stacking Superconducting Nanowire Single‐Photon Detectors With Orthogonal Polarization Sensitivity and Coincidence Detection

Fan Yang, Zhen Liu, Yang‐Hui Huang +16 more

ABSTRACT Although photodetector integration on waveguides is advanced, optical fiber lacks advantages in integration scalability. Integrating multiple photodetectors enables multi‐dimensional photon information acquisition, which is crucial for quantum information science. Here, fiber‐integrated dual‐layer SNSPDs with orthogonal polarization sensitivity and coincidence detection capability are demonstrated. Two SNSPD membranes were sequentially transferred onto a fiber facet with orthogonal nanowire orientations. At 1550 nm, the top and bottom layers exhibited system detection efficiency (SDE) of 49.6% and 42.4%, and polarization extinction ratio (PER), which is defined as the ratio of the maximum to minimum SDE, of 3.94 and 4.37, respectively. Summing the two signals increased the system detection efficiency to 57.9%–60.7% and reduced the overall PER to 1.06–1.14 across 1480–1640 nm. By reading each layer individually, coincidence measurement can be performed directly within the fiber with an overall timing jitter of 86 ps, characterized by femtosecond laser pulses. This work demonstrates multi‐dimensional single‐photon detection and the potential for fiber‐integrated quantum circuits.

Laser & Photonics Review•Oct 30, 2026•0 citations

Micro-fiber coupled superconducting nanowire single photon detector (Conference Presentation)

Lixing You

Ever since superconducting nanowire single-photon detectors (SNSPDs or SSPDs) were demonstrated, they have attracted a considerable attention due to the detectors’ promising performance that includes high detection efficiency (DE), low dark count rate (DCR), broadband sensitivity, and low timing jitter. The system detection efficiency (SDE) has been improved to be over 90% with a wavelength of 1550 nm in a fiber-coupled system by embedding the SNSPD in optical cavities. However, the implementation of optical cavity usually reduces the bandwidth of SNSPDs. As a result, there are some recent works on increasing the bandwidth of SNSPD. Furthermore, the size of the active area of meandered nanowires has to be compatible with the core size of an optical fiber such that good optical coupling can be achieved; this setup requires a long nanowire with a large kinetic inductance, thus resulting in a small counting rate and a large timing jitter, particularly for multi-mode fiber-coupled devices. Nevertheless, a particularly impressive waveguide-coupled SNSPD has been developed in recent years. By placing an SNSPD atop an optical waveguide that has been fabricated on various substrate materials, photons propagating in the waveguide have been found to be evanescently absorbed by nanowires that are only a few tens of microns long. The on-chip DE of this device has been estimated to be over 90%, thus indicating that it has both high absorptance and high intrinsic DE. If the waveguide and the nanowire are correctly dimensioned, the absorptance of this device can reach over 90% for a wavelength range of more than 700 nm. Furthermore, the length of the nanowire is shorter than that of the fiber-coupled SNSPD, thus leading to a higher count rate and lower timing jitter (~18 ps). However, unsatisfactory coupling losses between the optical fiber and the waveguide in such devices can decrease its SDE (~10%), thus limiting its applicability to quantum photonic integrated circuits (QPIC). Recently, we proposed a type of SNSPD that was coupled with microfibers (MFs), and simulations for this SNSPD indicated that its absorption would be as high as 90%. Microfibers and nanofibers, tapered adiabatically from standard fibers, with diameters close to or smaller than the wavelength of the guided light were demonstrated to have low transmittance losses by Tong et al. in 2003. MFs have been shown to have many interesting properties, such as strong evanescent fields, tight optical confinement, wideband abilities, and small masses; these properties are appealing for applications such as optical sensing and coupling. MFs also provide seamless connections with high transmittance from standard fibers; therefore, MF-coupled SNSPDs can achieve both high SDEs and wideband compatibility. We proposed and demonstrated the MF-coupled SNSPDs successfully. The simulation results indicate that with optimal device structure, the optical absorption with efficiency < 90% can be realized over a wavelength range of 350 nm to 2150 nm. The fabricated MF-coupled SNSPD, shows unparalleled broadband system detection efficiencies (SDEs) of more than 50% from 630 nm to 1500 nm. The SDEs reach 66% at 785 nm and 45% at 1550 nm. These results pave the way for ultra-broadband weak light detection with quantum-limit sensitivity.

Advanced Photon Counting Techniques•May 1, 2020•0 citations

Waveguide integrated superconducting single-photon detectors with high internal quantum efficiency at telecom wavelengths

Oliver Kahl, Simone Ferrari, Vadim V. Kovalyuk +3 more

Superconducting nanowire single-photon detectors (SNSPDs) provide high efficiency for detecting individual photons while keeping dark counts and timing jitter minimal. Besides superior detection performance over a broad optical bandwidth, compatibility with an integrated optical platform is a crucial requirement for applications in emerging quantum photonic technologies. Here we present SNSPDs embedded in nanophotonic integrated circuits which achieve internal quantum efficiencies close to unity at 1550 nm wavelength. This allows for the SNSPDs to be operated at bias currents far below the critical current where unwanted dark count events reach milli-Hz levels while on-chip detection efficiencies above 70% are maintained. The measured dark count rates correspond to noise-equivalent powers in the 10(-19) W/Hz(-1/2) range and the timing jitter is as low as 35 ps. Our detectors are fully scalable and interface directly with waveguide-based optical platforms.

Scientific Reports•Jun 10, 2015•112 citations

Superconducting nanowire single-photon detectors with 98% system detection efficiency at 1550 nm

Dileep V. Reddy, Robert R. Nerem, Sae Woo Nam +2 more

Superconducting nanowire single-photon detectors (SNSPDs) are an enabling technology for myriad quantum-optics experiments that require high-efficiency detection, large count rates, and precise timing resolution. The system detection efficiencies (SDEs) for fiber-coupled SNSPDs have fallen short of theoretical predictions of near unity by at least 7%, with the discrepancy being attributed to scattering, material absorption, and other SNSPD dynamics. We optimize the design and fabrication of an all-dielectric layered stack and fiber coupling package in order to achieve 98.0 ± 0.5 % SDE, measured for single-mode-fiber guided photons derived from a highly attenuated 1550 nm continuous-wave laser. This enforces a smaller bound on the scattering and absorption losses in such systems and opens the use of SNSPDs for scenarios that demand high-SDE for throughput and fidelity.

Optica•Oct 28, 2020•437 citations
ABSTRACT Directly integrating superconducting nanowire single‐photon detectors (SNSPDs) on the fiber facet could significantly reduce coupling loss and alignment uncertainty, enabling an all‐fiber single‐photon detector with high detection efficiency, robust coupling, and compact size. However, the material and mechanical incompatibility between bulky optical fibers and nano‐fabricated ultrathin nanowires makes fabrication and integration challenging. Here, we demonstrate a hybrid integration method that involves fabricating individual membrane‐based detectors and optical mirrors separately, followed by their precise assembly on fiber facets. After integration, the detectors exhibit saturated quantum efficiency, a maximum system detection efficiency of 68.6%, a timing jitter as low as 26 ps, and a counting rate of up to 51.7 Mcps. These performance metrics are comparable to SNSPDs on standard silicon wafers. Moreover, this integration enables a fiber facet coupling regime where the detector is embedded in the guide mode of the incident light, resulting in an exceptionally broad detection bandwidth (1310–1640 nm) with less than 2.3% reduction in efficiency. The successful fiber facet integration of SNSPDs not only provides an alternative coupling strategy but also introduces a single‐photon detection capability into the group of fiber‐integrated optoelectronics, paving the way for low‐loss, long‐range quantum communication and distributed sensing systems.
Fast and efficient detection of single photons with high timing accuracy is a crucial requirement in most quantum optics experiments and enables novel sensing and imaging solutions. Superconducting nanowire single-photon detectors (SNSPD) achieve technology-leading performance in terms of detection efficiency, dark count rate, timing jitter, and detector dead times. However, conventional SNSPDs with high system detection efficiency typically rely on resonant enhancement of the absorption efficiency, thus only achieving attractive detector benchmarks over narrow spectral windows. Waveguide-integrated SNSPDs allow for leveraging the wideband material absorption in superconducting nanowires by absorbing light in a traveling-wave geometry but have been limited to low system detection efficiencies due to interface losses when coupling to optical fibers. Here, we show how high system detection efficiencies of 22%–73% are realized over a broad wavelength range from 532 nm to 1640 nm in a single waveguide-integrated SNSPD device. We accomplish efficient coupling between optical fibers and waveguide-integrated nanowire detectors by employing a 3D interface, produced in direct laser writing, that relies on total internal reflection for achieving a broad transmission bandwidth. We further find low timing jitter of 25.7 ps and detector decay times of 9.8 ns, allowing for single-photon counting with high repetition rates up to 100 MHz. Our work paves the way for an efficient single-photon detector solution that combines the spectral requirements of an extremely wide range of quantum optics experiments in a single device. The coupling approach and SNSPD-integration with nanophotonic circuits are further well-suited for realizing large-scale detector arrays.
ABSTRACT Although photodetector integration on waveguides is advanced, optical fiber lacks advantages in integration scalability. Integrating multiple photodetectors enables multi‐dimensional photon information acquisition, which is crucial for quantum information science. Here, fiber‐integrated dual‐layer SNSPDs with orthogonal polarization sensitivity and coincidence detection capability are demonstrated. Two SNSPD membranes were sequentially transferred onto a fiber facet with orthogonal nanowire orientations. At 1550 nm, the top and bottom layers exhibited system detection efficiency (SDE) of 49.6% and 42.4%, and polarization extinction ratio (PER), which is defined as the ratio of the maximum to minimum SDE, of 3.94 and 4.37, respectively. Summing the two signals increased the system detection efficiency to 57.9%–60.7% and reduced the overall PER to 1.06–1.14 across 1480–1640 nm. By reading each layer individually, coincidence measurement can be performed directly within the fiber with an overall timing jitter of 86 ps, characterized by femtosecond laser pulses. This work demonstrates multi‐dimensional single‐photon detection and the potential for fiber‐integrated quantum circuits.
Ever since superconducting nanowire single-photon detectors (SNSPDs or SSPDs) were demonstrated, they have attracted a considerable attention due to the detectors’ promising performance that includes high detection efficiency (DE), low dark count rate (DCR), broadband sensitivity, and low timing jitter. The system detection efficiency (SDE) has been improved to be over 90% with a wavelength of 1550 nm in a fiber-coupled system by embedding the SNSPD in optical cavities. However, the implementation of optical cavity usually reduces the bandwidth of SNSPDs. As a result, there are some recent works on increasing the bandwidth of SNSPD. Furthermore, the size of the active area of meandered nanowires has to be compatible with the core size of an optical fiber such that good optical coupling can be achieved; this setup requires a long nanowire with a large kinetic inductance, thus resulting in a small counting rate and a large timing jitter, particularly for multi-mode fiber-coupled devices. Nevertheless, a particularly impressive waveguide-coupled SNSPD has been developed in recent years. By placing an SNSPD atop an optical waveguide that has been fabricated on various substrate materials, photons propagating in the waveguide have been found to be evanescently absorbed by nanowires that are only a few tens of microns long. The on-chip DE of this device has been estimated to be over 90%, thus indicating that it has both high absorptance and high intrinsic DE. If the waveguide and the nanowire are correctly dimensioned, the absorptance of this device can reach over 90% for a wavelength range of more than 700 nm. Furthermore, the length of the nanowire is shorter than that of the fiber-coupled SNSPD, thus leading to a higher count rate and lower timing jitter (~18 ps). However, unsatisfactory coupling losses between the optical fiber and the waveguide in such devices can decrease its SDE (~10%), thus limiting its applicability to quantum photonic integrated circuits (QPIC). Recently, we proposed a type of SNSPD that was coupled with microfibers (MFs), and simulations for this SNSPD indicated that its absorption would be as high as 90%. Microfibers and nanofibers, tapered adiabatically from standard fibers, with diameters close to or smaller than the wavelength of the guided light were demonstrated to have low transmittance losses by Tong et al. in 2003. MFs have been shown to have many interesting properties, such as strong evanescent fields, tight optical confinement, wideband abilities, and small masses; these properties are appealing for applications such as optical sensing and coupling. MFs also provide seamless connections with high transmittance from standard fibers; therefore, MF-coupled SNSPDs can achieve both high SDEs and wideband compatibility. We proposed and demonstrated the MF-coupled SNSPDs successfully. The simulation results indicate that with optimal device structure, the optical absorption with efficiency < 90% can be realized over a wavelength range of 350 nm to 2150 nm. The fabricated MF-coupled SNSPD, shows unparalleled broadband system detection efficiencies (SDEs) of more than 50% from 630 nm to 1500 nm. The SDEs reach 66% at 785 nm and 45% at 1550 nm. These results pave the way for ultra-broadband weak light detection with quantum-limit sensitivity.
Superconducting nanowire single-photon detectors (SNSPDs) provide high efficiency for detecting individual photons while keeping dark counts and timing jitter minimal. Besides superior detection performance over a broad optical bandwidth, compatibility with an integrated optical platform is a crucial requirement for applications in emerging quantum photonic technologies. Here we present SNSPDs embedded in nanophotonic integrated circuits which achieve internal quantum efficiencies close to unity at 1550 nm wavelength. This allows for the SNSPDs to be operated at bias currents far below the critical current where unwanted dark count events reach milli-Hz levels while on-chip detection efficiencies above 70% are maintained. The measured dark count rates correspond to noise-equivalent powers in the 10(-19) W/Hz(-1/2) range and the timing jitter is as low as 35 ps. Our detectors are fully scalable and interface directly with waveguide-based optical platforms.
Superconducting nanowire single-photon detectors (SNSPDs) are an enabling technology for myriad quantum-optics experiments that require high-efficiency detection, large count rates, and precise timing resolution. The system detection efficiencies (SDEs) for fiber-coupled SNSPDs have fallen short of theoretical predictions of near unity by at least 7%, with the discrepancy being attributed to scattering, material absorption, and other SNSPD dynamics. We optimize the design and fabrication of an all-dielectric layered stack and fiber coupling package in order to achieve 98.0 ± 0.5 % SDE, measured for single-mode-fiber guided photons derived from a highly attenuated 1550 nm continuous-wave laser. This enforces a smaller bound on the scattering and absorption losses in such systems and opens the use of SNSPDs for scenarios that demand high-SDE for throughput and fidelity.