Magnetometers based on the nitrogen-vacancy defect centers in diamonds are currently an active research topic due to their high sensitivity and relative ease of use compared to other similar solutions. Despite already being used by numerous research institutions, their widespread adoption is still hindered by high cost and complexity of the required associated equipment. This paper presents a hardware-accelerated measurement system implemented in FPGA chip, as well as the supporting analog electronics and software application. The developed system is capable of ODMR spectrum measurement, lock-in detection and multipoint resonance frequency tracking.
Magnetometers based on the nitrogen-vacancy defect centers in diamonds are currently an active research topic due to their high sensitivity and relative ease of use compared to other similar solutions. Despite already being used by numerous research institutions, their widespread adoption is still hindered by high cost and complexity of the required associated equipment. This paper presents a hardware-accelerated measurement system implemented in FPGA chip, as well as the supporting analog electronics and software application. The developed system is capable of ODMR spectrum measurement, lock-in detection and multipoint resonance frequency tracking.
In modern-day quantum metrology, quantum sensors are widely employed to detect weak magnetic fields or nanoscale signals. Quantum devices, exploiting quantum coherence, are inevitably connected to physical constants and can achieve accuracy, repeatability, and precision approaching fundamental limits. As a result, these sensors have shown utility in a wide range of research domains spanning both science and technology. A rapidly emerging quantum sensing platform employs atomic-scale defects in crystals. In particular, magnetometry using nitrogen-vacancy (NV) color centers in diamond has garnered increasing interest. NV systems possess a combination of remarkable properties, optical addressability, long coherence times, and biocompatibility. Sensors based on NV centers excel in spatial resolution and magnetic sensitivity. These diamond-based sensors promise comparable combination of high spatial resolution and magnetic sensitivity without cryogenic operation. The above properties of NV magnetometers promise increasingly integrated quantum measurement technology, as a result, they have been extensively developed with various protocols and find use in numerous applications spanning materials characterization, nuclear magnetic resonance (NMR), condensed matter physics, paleomagnetism, neuroscience and living systems biology, and industrial vector magnetometry. In this chapter, NV centers are explored for magnetic sensing in a number of contexts. In general, we introduce novel regimes for magnetic-field probes with NV ensembles. Specifically, NV centers are developed for sensitive magnetometers for applications where microwaves (MWs) are prohibitively invasive and operations need to be carried out under zero ambient magnetic field. The primary goal of our discussion is to improve the utility of these NV center-based magnetometers.
The field of quantum sensing has shown rapid advancement in recent years. These advances have focused on making quantum sensors, which previously required laboratory environments and expensive bulky equipment, more portable and cost-effective. These developments are largely due to the use of nitrogen-vacancy (NV) centers in diamond. NV center diamond is suitable because its quantum mechanical properties can be observed over a wide range of temperatures and do not require strictly controlled conditions such as environmental shielding. These characteristics make NV centers promising candidates for sensing applications, such as defense-related technologies. Potential applications include magnetometry for navigation and radio-frequency sensing for signal interception, motivating the project conducted at the Swedish Defence Research Agency (FOI). This thesis presents and evaluates a low-cost and portable design of an NV center based magnetometer to determine the feasibility of such designs. The results demonstrate that the sensor is capable of detecting the underlying quantum phenomena in a diamond containing NV centers, yielding an optically detected magnetic resonance (ODMR) signal. Furthermore, the sensor responds to changes in magnetic fields. However, several design challenges remain before achieving high-accuracy sensing performance.
Nitrogen Vacancy (NV) centers are point defects in diamond that allow magnetic field sensing based on Optically Detected Magnetic Resonance (ODMR). They are processed in ultrapure single-domain CVD grown diamond crystals and can be operated at room temperature. This results in solid-state sensors with a wide variety of applications. Ensemble of NV centers can be used to perform wide-field magnetic imaging with sensitivity in the nT range. Single NV centers can also be processed, which allows sensing at the atomic scale. This possibility, combined with its unique coherence properties, make NV center an ideal candidate for quantum sensing.
The Nitrogen-Vacancy (NV) center in diamond is a prominent quantum system leveraged for advanced quantum metrology, particularly in high-precision magnetometry and high-resolution quantum imaging, exploiting the Optically Detected Magnetic Resonance (ODMR) spectroscopy technique. Proper radio-frequency (RF) excitation of NV centers is critical in order to manipulate these quantum states effectively. Our research focuses on optimizing the continuous-wave RF excitation of ensembles of NV centers on coplanar waveguide transmission lines (CPW-TL), measuring the centers' photoluminescence (PL) signal as a function of RF power. This setup enhances the sensitivity and resolution of the NV center PL signal. By combining CPW-TL lines with nanodiamonds, our approach aims to develop a scalable and tunable platform that can be deployed in a variety of quantum sensing scenarios, including in biomedical applications, navigation systems, environmental monitorlng, and beyond.
Quantum sensing using nitrogen-vacancy (NV) centers in diamond has emerged as a powerful platform for detecting ultra-low magnetic fields under ambient conditions. Owing to their long spin coherence times, optical addressability, and compatibility with aqueous environments, it has found widespread applications in biosensing and bio-imaging. This review presents the fundamental principles and recent advances in NV-based quantum magnetometry for biosensing applications, with a particular focus on measurements in aqueous medium and at cellular and molecular length scales. We discuss the underlying spin physics of NV centers and highlight two primary detection modalities: optically detected magnetic resonance (ODMR) and T1 relaxometry-based sensing and how these approaches aids in the detection of both static magnetic fields and dynamic magnetic noise arising from biological processes. The review explores key application areas, including nanoscale nuclear magnetic resonance (NMR), monitoring of neural activity, detection of abnormal or rogue cells using NV-based platforms etc. In addition, strategies for enhancing sensitivity, such as surface functionalization of nanodiamonds, femtosecond (fs) laser-written photonic structures, and integration with microfluidic and lab-on-chip systems have also been discussed in depth. We also address the critical challenges, including surface-induced decoherence, charge-state instability, and signal-to-noise limitations in biofluids associated with NV-based biosensing applications. Finally, we outline future prospects, highlighting how NV-based magnetic biosensing provides a promising pathway for translating quantum sensing technologies into practical biomedical applications.
In recent years, the nitrogen-vacancy (NV) center in diamonds has been demonstrated to be a high-performance multiphysics sensor, where a lock-in amplifier (LIA) is often adopted to monitor photoluminescence changes around the resonance. It is rather complex when multiple resonant points are utilized to realize a vector or temperature-magnetic joint sensing. In this article, we present a novel scheme to realize multipoint lock-in detection with only a single-channel device. This method is based on a direct digital synthesizer (DDS) and frequency-shift keying (FSK) technique, which is capable of freely hopping frequencies with a maximum of 1.4 GHz bandwidth and encoding an unlimited number of resonant points during the sensing process. We demonstrate this method in experiments and show it would be generally useful in quantum multi-frequency excitation applications, especially in the portable and highly mobile cases.