The progress in modern quantum information processing (QIP) strongly depends on new algorithms and on the development of novel quantum entanglement processing elements enabling to perform quantum computation and quantum simulation effectively. Several examples of quantum information processing applications based on freshly designed linear-optics devices are presented. A beam splitter (BS) is a central device in linear-optical quantum information processing because it can split the incoming photon amplitudes into spatially distinct modes to establish conditions for quantum superposition. The BS naturally possesses directional-bias in a sense that incoming photons can only propagate in a forward manner. When the execution of certain quantum information tasks would require multiple operations, this directionality condition becomes a serious obstacle by creating significant overhead in the number of needed elements and other supporting devices. We introduce a family of amplitude-controllable fully-reversible linear-optical quantum information processors, called directionally-unbiased linear-optical multiports, in order to achieve significant reduction in the number of required hardware. The theoretical analysis of the device design as well as the experimental realization of three-port unit using bulk linear optics is demonstrated. These devices offer several fresh approaches in quantum-walk-based applications such as quantum simulation of solid-state Hamiltonians, topological protection of polarization qubits against errors, and quantum communication. Topological photonics is an emerging and actively developing field because of its capability to stabilize and protect some quantum states from perturbation errors by ensuring the environment carries a distinct topological signature. Topology-dependent quantum information processing is globally stable due to the entire system being engaged in the information manipulation. We demonstrate suppression of quantum amplitude transfer between two distinct bulk regions of a system. This results in error avoidance for a two-photon polarization-entangled state under specific conditions. The goal of modern quantum communication is a reliable distribution of quantum entanglement between multiple nodes performing quantum operations such as quantum memories and quantum computers. We demonstrated that local quantum information processing using new fully-reversible four-port linear-optical structures could find an immediate application in quantum communication. A quantum information routing device is introduced based on the use of four-dimensional Grover matrices and beam splitters. Several multiport-based units are developed to demonstrate new higher-dimensional Hong-Ou-Mandel (HOM) effect and directionally-controllable entangled state distribution while changing only phases in a waveguided unit. Several such operational elements could be linked to form a reconfigurable network of quantum users without losing control of quantum amplitudes. This allows controllable routing of entangled photons and sharing entanglement between any designated users in the future quantum computational networks.
The progress in modern quantum information processing (QIP) strongly depends on new algorithms and on the development of novel quantum entanglement processing elements enabling to perform quantum computation and quantum simulation effectively. Several examples of quantum information processing applications based on freshly designed linear-optics devices are presented. A beam splitter (BS) is a central device in linear-optical quantum information processing because it can split the incoming photon amplitudes into spatially distinct modes to establish conditions for quantum superposition. The BS naturally possesses directional-bias in a sense that incoming photons can only propagate in a forward manner. When the execution of certain quantum information tasks would require multiple operations, this directionality condition becomes a serious obstacle by creating significant overhead in the number of needed elements and other supporting devices. We introduce a family of amplitude-controllable fully-reversible linear-optical quantum information processors, called directionally-unbiased linear-optical multiports, in order to achieve significant reduction in the number of required hardware. The theoretical analysis of the device design as well as the experimental realization of three-port unit using bulk linear optics is demonstrated. These devices offer several fresh approaches in quantum-walk-based applications such as quantum simulation of solid-state Hamiltonians, topological protection of polarization qubits against errors, and quantum communication. Topological photonics is an emerging and actively developing field because of its capability to stabilize and protect some quantum states from perturbation errors by ensuring the environment carries a distinct topological signature. Topology-dependent quantum information processing is globally stable due to the entire system being engaged in the information manipulation. We demonstrate suppression of quantum amplitude transfer between two distinct bulk regions of a system. This results in error avoidance for a two-photon polarization-entangled state under specific conditions. The goal of modern quantum communication is a reliable distribution of quantum entanglement between multiple nodes performing quantum operations such as quantum memories and quantum computers. We demonstrated that local quantum information processing using new fully-reversible four-port linear-optical structures could find an immediate application in quantum communication. A quantum information routing device is introduced based on the use of four-dimensional Grover matrices and beam splitters. Several multiport-based units are developed to demonstrate new higher-dimensional Hong-Ou-Mandel (HOM) effect and directionally-controllable entangled state distribution while changing only phases in a waveguided unit. Several such operational elements could be linked to form a reconfigurable network of quantum users without losing control of quantum amplitudes. This allows controllable routing of entangled photons and sharing entanglement between any designated users in the future quantum computational networks.
The optical beam splitter is a widely-used device in photonics-based quantum information processing. Specifically, linear optical networks demand large numbers of beam splitters for unitary matrix realization. This requirement comes from the beam splitter property that a photon cannot go back out of the input ports, which we call “directionally-biased”. Because of this property, higher dimensional information processing tasks suffer from rapid device resource growth when beam splitters are used in a feed-forward manner. Directionally-unbiased linear-optical devices have been introduced recently to eliminate the directional bias, greatly reducing the numbers of required beam splitters when implementing complicated tasks. Analysis of some originally directional optical devices and basic principles of their conversion into directionally-unbiased systems form the base of this paper. Photonic quantum walk implementations are investigated as a main application of the use of directionally-unbiased systems. Several quantum walk procedures executed on graph networks constructed using directionally-unbiased nodes are discussed. A significant savings in hardware and other required resources when compared with traditional directionally-biased beam-splitter-based optical networks is demonstrated.
The optical beam splitter is one of the main building blocks in photonics-based quantum information processing. Traditionally, beam splitters are used in feed-forward configurations that reflect their natural directional-bias, meaning a photon cannot leave the scattering element through the entrance port. However, this directional-bias constraint can be circumvented by designing new linear-optical configurations that include mirrors in addition to the beam splitter. This directionality removal restores a full symmetry in the scattering element and allows the input photon to leave the system also from the input port. Such a system can be seen as a scattering center, enabling execution of quantum walks on rather complex optical graph networks with great savings in hardware resources when compared with existing approaches utilizing directionally-biased devices. The directionallyunbiased configuration can be realized using different optical systems. Analysis of some originally directional optical devices and the basic principles of their conversion into directionally-unbiased systems form the base of this paper. Several quantum walk procedures executed on graph networks constructed using directionallyunbiased nodes are discussed.
All existing optical quantum walk approaches are based on the use of beamsplitters and multiple paths to explore the multitude of unitary transformations of quantum amplitudes in a Hilbert space. The beamsplitter is naturally a directionally biased device: the photon cannot travel in the reverse direction. This causes rapid increases in the optical hardware resources required for complex quantum walk applications, since the number of options for the walking particle grows with each step. Here we present the experimental demonstration of a directionally-unbiased linear-optical multiport, which allows reversibility of the photon direction. An amplitude-controllable probability distribution matrix for a unitary three-edge vertex is reconstructed with only linear-optical devices. Such directionally-unbiased multiports allow direct execution of quantum walks over a multitude of complex graphs and in tensor networks. This approach would enable simulation of complex Hamiltonians of physical systems and quantum walk applications in a more efficient and compact setup, substantially reducing the required hardware resources.
Directionally-unbiased multiports and topological states. The goal is to entangle states associated with distinct topological sectors, and to do so in a way that allows this entangled topology to be readily available for information processing and detection. Specifically, linear optics will be used to produce: (i) winding-number-entangled bulk states, and (ii) an entangled pair of error-protected memory registers. To create the states, a source of initial polarization-entangled light is necessary, specifically type-II spontaneous parametric down conversion (SPDC) in a nonlinear crystal. All further processing requires only linear optical elements. Topological invariants characterize global properties of systems and cannot be easily distinguished by localized measurements. This difficulty in measurement traditionally limits their use in many applications. That problem is solved here by linking topology to a more easily-measured variable, polarization. Polarization and winding number will be tightly correlated (and in fact, jointly entangled with each other), but will serve distinct purposes: winding number provides stability against perturbations, while polarization allows easy access and measurement. Jointly-entangled topologically-protected bulk states. Start with a polarization-entangled photon source, type-II spontaneous parametric down conversion in a nonlinear crystal allowing the two-photon output to be taken as an entangled Bell state. The goal is to convert this into a state of entangled winding number, while keeping polarization entanglement intact to use for control and measurement purposes.
Quantum information processing (QIP) is an interdisciplinary field concerned with the development of computers and information processing systems that utilize quantum mechanical properties of nature to carry out their function. QIP systems have become vastly more practical since the turn of the century. Today, QIP applications span imaging, cryptographic security, computation, and simulation (quantum systems that mimic other quantum systems). \nMany important strategies improve quantum versions of classical information system hardware, such as single photon detectors and quantum repeaters. Another more abstract strategy engineers high-dimensional quantum state spaces, so that each successful event carries more information than traditional two-level systems allow. Photonic states in particular bring the added advantages of weak environmental coupling and data transmission near the speed of light, allowing for simpler control and lower system design complexity. \n \nIn this dissertation, numerous novel, scalable designs for practical high-dimensional linear-optical QIP systems are presented. First, a correlated photon imaging scheme using orbital angular momentum (OAM) states to detect rotational symmetries in objects using measurements, as well as building images out of those interactions is reported. Then, a statistical detection method using chains of OAM superpositions distributed according to the Fibonacci sequence is established and expanded upon. It is shown that the approach gives rise to schemes for sorting, detecting, and generating the recursively defined high-dimensional states on which some quantum cryptographic protocols depend. \n \nFinally, an ongoing study based on a generalization of the standard optical multiport for applications in quantum computation and simulation is reported upon. The architecture allows photons to reverse momentum inside the device. This in turn enables realistic implementation of controllable linear-optical scattering vertices for carrying out quantum walks on arbitrary graph structures, a powerful tool for any quantum computer. It is shown that the novel architecture provides new, efficient capabilities for the optical quantum simulation of Hamiltonians and topologically protected states. Further, these simulations use exponentially fewer resources than feedforward techniques, scale linearly to higher-dimensional systems, and use only linear optics, thus offering a concrete experimentally achievable implementation of graphical models of discrete-time quantum systems.
Linear optical multiports are widely used in photonic quantum information processing. Naturally, these devices are directionally-biased since photons always propagate from the input ports toward the output ports. Recently, the concept of directionally-unbiased linear optical multiports was proposed. These directionally-unbiased multiports allow photons to propagate along a reverse direction, which can greatly reduce the number of required linear optical elements for complicated linear optical quantum networks. Here, we report an experimental demonstration of a 3 × 3 directionally-unbiased linear optical fiber multiport using an optical tritter and mirrors. Compared to the previous demonstration using bulk optical elements which works only with light sources with a long coherence length, our experimental directionally-unbiased 3 × 3 optical multiport does not require a long coherence length since it provides negligible optical path length differences among all possible optical trajectories. It can be a useful building block for implementing large-scale quantum walks on complex graph networks.