In neutral atom quantum computers, readout and preparation of the atomic qubits are usually based on fluorescence imaging and subsequent analysis of the acquired image. For each atom site, the brightness or some comparable metric is estimated and used to predict the presence or absence of an atom. Across different setups, we can see a vast number of different approaches used to analyze these images. Often, the choice of detection algorithm is either not mentioned at all or it is not justified. We investigate several different algorithms and compare their performance in terms of both precision and execution run time. To do so, we rely on a set of synthetic images across different simulated exposure times with known occupancy states, which we generated using a previously validated imaging simulation. Since the use of simulation provides us with the ground truth of atom site occupancy, we can easily state precise error rates and variances of the reconstructed property. However, knowing the relative performance of these algorithms is not sufficient to justify their use, since better ones can exist that were not compared. To investigate this possibility, we calculated the Cramer-Rao bound in order to establish an upper limit that even a perfect estimator cannot outperform. As the metric of choice, we used the number of photonelectrons that can be contributed to a specific atom site. Every estimator that reconstructs a different property can simply be scaled accordingly. Since the bound depends on the occupancy of neighboring sites, we provide the best and worst cases, as well as a half filled one, which should represent an averaged bound best. Our comparison shows that of our tested algorithms, a global nonlinear least-squares solver that uses the optical system's point spread function (PSF) to return a global bias and each sites' number of photoelectrons performed the best, on average crossing the worst-case bound for longer exposure times. Its main drawback is its huge computational complexity and, thus, required calculation time. We manage to somewhat reduce this problem, suggesting that its use may be viable, leading us to a novel group of algorithms that present a compromise between speed and precision. However, our study also shows that for cases where utmost speed is required, simple algorithms, like summing up pixel values around atom sites, may be preferable.
Neutral atoms trapped in optical lattices are promising candidates for quantum information processing and quantum simulation. Over the last decades, elegant tools for the manipulation of the internal and external states of optically trapped atoms have been developed. The crucial capability of scalable internal state readout in these systems, however, still relies on destructive methods. In spite of the important role of near-resonant illumination for the manipulation and detection of atoms in the lattice, there also exists a significant lack of studies on the heating and cooling dynamics of optically trapped atoms interacting with near-resonant light. An in-depth understanding of the heating and cooling processes is essential to finding the conditions of illumination that enable the non-destructive internal state readout of multiple atoms. This work presents an experimental system to cool, trap, manipulate, and detect the internal and external states of a small ensemble of 87Rb neutral atoms trapped in a one-dimensional optical lattice. A high photon detection efficiency in our experimental system allows for fast fluorescence imaging with acquisition times of 20 ms and fast position determination of atoms in the optical lattice with an accuracy of ∼ 40 nm. Using this experimental system, we investigate the heating dynamics of a neutral atom trapped in a standing wave dipole trap illuminated by a single near-resonant laser beam. A theoretical description to describe our measurements is provided in two experimentally relevant regimes. First, we consider the case of a weak near-resonant beam and later the case of off-resonant illumination. From this analysis, we find settings for the illumination light which allows an atom to scatter many photons before it is expelled from the trap. Building on these results we demonstrate simultaneous, non-destructive determination of the internal state of spatially resolved atoms trapped in a one-dimensional optical lattice with a fidelity of 98.6 ± 0.2% and a survival probability of 99.0 ± 0.2%. During the readout process, less than 2% of the atoms change their initial ground state. In order to determine the state of atoms that are not spatially resolved, a novel image analysis technique is presented. The technique uses Bayesian methods, which include the statistics of the detected photons as well as the response from the EMCCD camera. The Bayesian method is implemented on experimental data for atoms trapped in a one-dimensional optical lattice and its accuracy is tested by numerical simulations. In addition, an extension of this algorithm for atoms trapped in two-dimensional lattices is provided. Finally, the non-destructive state detection method is utilized as a tool for the state determination following the coherent control of the internal and external states of atoms in the optical trap. Here Raman sideband cooling is implemented and utilized in an atomic compression sequence for the creation of a small and dense atomic ensemble. These techniques will play an important role in experiments studying the collective light interaction of the atomic ensemble in a recently added optical fiber cavity.
Neutral atom quantum computers require accurate single atom detection for the preparation and readout of their qubits. This is usually done using fluorescence imaging. The occupancy of an atom site in these images is often somewhat ambiguous due to the stochastic nature of the imaging process. Further, the lack of ground truth makes it difficult to rate the accuracy of reconstruction algorithms. We introduce a bottom-up simulator that is capable of generating sample images of neutral atom experiments from a description of the actual state in the simulated system. Possible use cases include the creation of exemplary images for demonstration purposes, fast training iterations for deconvolution algorithms, and generation of labeled data for machine-learning-based atom detection approaches. The implementation is available through our GitHub as a C library or wrapped Python package. We show the modeled effects and implementation of the simulations at different stages of the imaging process. Not all real-world phenomena can be reproduced perfectly. The main discrepancies are that the simulator allows for only one characterization of optical aberrations across the whole image, supports only discrete atom locations, and does not model all effects of complementary metal-oxide-semiconductor (CMOS) cameras perfectly. Nevertheless, our experiments show that the generated images closely match real-world pictures to the point that they are practically indistinguishable and can be used as labeled data for training the next generation of detection algorithms.
In this work we report on the development progress of a cold atoms platform to demonstrate a model of quantum computation known as deterministic Quantum computing with One Clean Qubit (DQC1). This is a novel class of algorithms where interactions between qubits enable nonclassical correlations other than entanglement, namely discord. We aim to demonstrate the DQC1 protocol using a scheme in which the information processing is realized on cold neutral rubidium atoms through the cNOT gate based on a Rydberg blockade. The implementation of this protocol imposes very stringent requirements on the cloud of atoms: to realise the cNOT gate with high fidelity it is required that a full Rydberg blockade is operating throughout the extent of the ensemble. This means that a cloud of atoms needs to have a radius below approximately 5 μm (for Rydberg states of atoms n = 43). A dipole trap system was designed and implemented during the course of this PhD with the aim of satisfying these experimental constraints. In our setup, a vapour of 87Rb is first trapped in a Magneto-Optical Trap (MOT) and cooled to sub-Doppler temperatures. The atoms are then subsequently trapped in the dipole trap. Our dipole trapping setup is based on a high numerical aperture lens (NA=0.53) to achieve a sub-micron trapping potential and simultaneously observe trapped atoms with a micrometre resolution. According to the design and the optical tests, the system is capable of creating the trapping potential with about 1 μm waist and 4 μm Rayleigh length. The aim of this work was to examine and optimise experimental conditions under which the dipole trap should be operated, so that the sufficiently small trap for the DQC1 algorithm can be obtained in the future. For characterisation, a trap of a bigger volume (about 6 μm waist and 28 μm length) was setup instead of using the full capacity of the system. This enhanced the atom loading procedure and provided more convenient conditions for experiments. The temperature of atoms was typically around 250 μK, and the trap lifetime (2.5 s) was limited by the background collisions, which indicates that the vacuum was maintained on the expected level. The key findings of the thesis are that the properties of the atoms reservoir (MOT temperature and density), and the loading processes (intensity of MOT beams), need to be optimised to be able to load a micrometre size trap. These findings are instrumental for the future implementation of the DQC1 protocol and also have implications for other protocols founded on the use of a Rydberg blockade.
The power of quantum computation derives from algorithmic methods that exploit the availability of quantum superposition and entanglement to perform computations that are intractable with classical devices. The race is on to develop hardware that will unleash the promise of quantum algorithms. A handful of different types of hardware are currently being developed with the greatest efforts directed at superconducting, quantum-dot, trapped-ion, photonic, and neutral-atom approaches [1]. While all approaches have strengths and weaknesses, and are at different stages of development, the challenge of creating a practical design that can be scaled to a million or more qubits has not yet been met with any of the existing platforms. One may wonder if we really need a million qubits for a useful quantum computer. The answer depends on our ambition level. On the one hand it is widely believed that a quantum computer with less than 100 reliable qubits will be able to demonstrate a quantum advantage for a well defined computational problem [2]. Demonstration of a quantum computational advantage will generate great excitement in the halls of academia, but will have little broader import. A problem of great practical interest such as ab initio design of chemicals for increasing the yield of fertilizers for crop production, to name but one example, may also require just a few hundred qubits, provided computational sequences with circuit depth of 1010 or more operations can be reliably performed [3]. However, given the current performance of qubit hardware, which has demonstrated error rates not less than ∼10−3, computations with depth 1010 will only produce random outcomes of negligible value. The solution lies in the construction of error-correction circuitry operating on logical qubits, each composed of many physical qubits, which will enable logical error rates many orders of magnitude smaller than physical error rates. Although error correction is remarkably efficient for classical computing devices—Hamming codes detect and correct errors while only requiring roughly 10% overhead in the number of physical bits—quantum error correction is notoriously expensive. New approaches to error correction are the subject of intensive research with one promising direction being the development of codes that are optimized to suppress the dominant error mechanism in a particular physical platform [4,5]. Nevertheless, with physical error rates of 10−4, a plausible target for current qubit systems, the overhead required to reach logical error rates of 10−10 may be measured in thousands of physical qubits for each logical qubit. Thus a quantum computer able to perform deep calculations on a few hundred logical qubits could require a million physical qubits. A consequence of the cost of quantum error correction is that any viable approach to large-scale quantum computing needs to combine high-fidelity quantum logic operations with a capability for integrating large numbers of physical qubits. From this perspective neutral-atom qubits appear particularly promising [6] as they have already demonstrated control of more qubits than any other platform with recent experiments in 1D [7], 2D [8,9], and 3D [10] geometries showing control of up to 50 atomic qubits. Large qubit arrays can potentially be prepared in 1D, 2D, or 3D geometries. The number of proximal qubits increases with the dimensionality, which is advantageous for implementation of error correction code words, and points towards a preference for 2D or 3D arrays. On the other hand, the added overhead of compensating crosstalk incurred when targeting atoms inside a 3D volume makes parallel operations on multiple qubits challenging. A 2D geometry, as shown schematically in Fig. 1, may be an optimal choice since qubit control and measurement can be performed with lasers propagating normal to the plane of the array so that individual qubit sites can be addressed independently. With demonstrated array periods of a few micrometers we require a footprint of less than 1 mm2 for 104 qubits. Conceptual picture of a 2D neutral-atom qubit array. a) High-numerical-aperture lenses project several different wavelengths of light for control and measurement of the qubits. Specific choices of optical wavelengths depend on the atomic species. Not shown are optics for initial laser cooling, transport to the array, beam scanning, and imaging for qubit measurement. b) Averaged fluorescence image of 49 atomic qubits on a 2D grid with |
3.8μm| spacing [8]. From a fundamental perspective the prospects for scaling neutral-atom systems are particularly promising due to the exceptionally large ratio between coherent and incoherent coupling rates. Neutral-atom qubits are encoded in hyperfine ground states for which coherence times of the order of 10 s have been demonstrated [10]. This implies a dephasing rate |
γ∼0.1s−1|. The coherent coupling that enables quantum logic operations is switched on by exciting atoms to high-lying Rydberg states with principal quantum number close to 100 [11,12]. Rydberg excited atoms at spacings of a few micrometers in an optical lattice interact coherently with rates |
g>109s−1|. The ratio between desired coherent coupling and residual incoherent dephasing of g/γ ∼ 1010 establishes a figure of merit that is enabling for scalability. To our knowledge only trapped ions can claim a similar g/γ ratio [13], but without a correspondingly direct path towards controlling thousands of qubits in a single processing unit. Although the g/γ ratio is exceptionally favorable for neutral-atom qubits a complete set of universal gate operations has not yet been demonstrated with high fidelity. Single-qubit gates in large 2D and 3D arrays have reached fidelity |
F∼0.999| [8,10]. However, the highest demonstrated fidelity for two-qubit entanglement mediated by Rydberg-state interactions is |
F<0.8| [6,14,15], a value that is well short of the theoretical limit of |
F>0.9999| [16,17]. There is healthy optimism within the research community working with neutral-atom qubits that combining improved laser sources with reduced noise, better cooling to reduce motional dephasing, and control of stray electric fields that perturb Rydberg atoms will lead to substantially improved gate fidelity in the near future. Recent results with better filtering of laser phase noise have already demonstrated remarkable improvement in ground–Rydberg entanglement [18]. The outlook for the next few years appears very promising. We anticipate that with advances in lasers, optical lattices for atom trapping, deterministic rearrangement and loading of atoms in multi-dimensional arrays [19,20], and optics for fast beam scanning it will be possible to increase the number of physical qubits in a single neutral-atom module to at least 104. A challenging yet plausible path to a million-qubit processor can then be contemplated by connecting 100 such modules with atom–photon entanglement channels [21]. Beyond the potential for advancing the state of the art in computation, development of techniques for single-atom control inside large multi-atom arrays will enable other applications of quantum science including metrology and time-keeping. Rydberg interactions that are at the heart of a neutral-atom quantum computer may lead to multi-atom entanglement and Heisenberg scaling of atomic-clock precision [22]. This work was supported by the NSF and ARL CDQI.
To increase computing power for numerous practical advantages, scientists are actively researching the field of quantum computing. Neutral atom quantum computing is a promising avenue towards building a quantum computer that satisfies four of the five DiVincenzo criteria. This involves a magneto-optical trap to cool the atoms and move them to a cloud in the center of a vacuum chamber. Then laser light will be shone through an array of pinholes to trap the atoms in an array of dipole traps. In order to ensure the atoms are trapped, I have set up an imaging system that consists of a high speed camera and a photodiode. The imaging system is to be used to determine whether the atoms were successfully trapped, calculate how many were trapped, and measure the temperature of the trap, the trap lifetime, and the trap frequency. Details regarding the setup and programming of this imaging system are presented in this paper.