This Paper examines novel approach the advancements in Q-dots based quantum radar technology, design considerations for its integration, and quantum radar cross section (QRCS) based on interferometric and quantum electrodynamics. In addition to performing standard target detection and recognition duties, quantum radar systems with quantum measurement assistance may also detect and identify RF stealth platforms and missile systems. In numerous fields of study, the advancement of radar technology is crucial. A quantum radar is a notion that has been developed that uses photon quantum states to gather information about a distant target. A single photon or a small group of photons is directed in the direction of the target. The target absorbs the photons, which are then re-emitted into the receiver. There are two possible approaches to carrying out the measurement procedure. An interferometric analysis can be performed.one can either count the number of photons that return or perform a measurement (or phase measurement) on the photon. Since the latter technique is called Quantum Illumination, the former is called Interferometric Quantum Radar. Entangled states or stationary quantum states of photons can be used for either of those techniques. Entangled states have been demonstrated to offer the best resolution enhancement, reaching the optimum situation. Compared to classical approaches, the advantage of adopting quantum states is that they show more degrees of correlation via which information can be obtained. These additional correlations, sometimes referred to as quantum correlations, increase the radar system's potential resolution and signal/noise ratio (SNR). Relationship research between the two photons is conducted in order to gather data. Coherent state quantum radar relies on coherent state photons and a quantum detection technique to overcome the diffraction limit. The design and operating concepts of quantum applied trends are also reviewed in this work.
This Paper examines novel approach the advancements in Q-dots based quantum radar technology, design considerations for its integration, and quantum radar cross section (QRCS) based on interferometric and quantum electrodynamics. In addition to performing standard target detection and recognition duties, quantum radar systems with quantum measurement assistance may also detect and identify RF stealth platforms and missile systems. In numerous fields of study, the advancement of radar technology is crucial. A quantum radar is a notion that has been developed that uses photon quantum states to gather information about a distant target. A single photon or a small group of photons is directed in the direction of the target. The target absorbs the photons, which are then re-emitted into the receiver. There are two possible approaches to carrying out the measurement procedure. An interferometric analysis can be performed.one can either count the number of photons that return or perform a measurement (or phase measurement) on the photon. Since the latter technique is called Quantum Illumination, the former is called Interferometric Quantum Radar. Entangled states or stationary quantum states of photons can be used for either of those techniques. Entangled states have been demonstrated to offer the best resolution enhancement, reaching the optimum situation. Compared to classical approaches, the advantage of adopting quantum states is that they show more degrees of correlation via which information can be obtained. These additional correlations, sometimes referred to as quantum correlations, increase the radar system's potential resolution and signal/noise ratio (SNR). Relationship research between the two photons is conducted in order to gather data. Coherent state quantum radar relies on coherent state photons and a quantum detection technique to overcome the diffraction limit. The design and operating concepts of quantum applied trends are also reviewed in this work.
This paper presents a study on quantum radar technology developments, design Consideration for its integration, and quantum radar cross-section, QRCS based on quantum electrodynamics and interferometric considerations. Quantum radar systems supported by quantum measurement can fulfill not only conventional target detection and recognition tasks but are also capable of detecting and identifying the RF stealth platform and weapons systems. The development of radar technology is of the utmost importance in many avenues of research. The concept of a quantum radar has been proposed which utilizes quantum states of photons to establish information on a target at a distance. A photon, or a little cluster of photons, is distributed towards the target. The photons are absorbed and reemitted from the target and into the receiver. The measurement process may be executed in two alternative ways. One can perform an interferometric measurement (or phase measurement) on the photon, or one can simply count the number of photons that return. the previous method is named Interferometric Quantum Radar, and therefore the latter method is termed Quantum Illumination. For either of those methods, one can use stationary quantum states of photons or use entangled states. Its been shown that entangled states provide the most effective possible boost in resolution, achieving within the ideal case. The benefit of using quantum states is that they exhibit extra degrees of correlation by which to get information compared to classical methods. These extra correlations (called quantum correlations) serve to boost the resolution and signal/noise (SNR) that may be achieved within the radar system.
This paper provides a brief introduction of the current state of quantum radar (QR) technology development, focusing on the experimental methods used for modifying QR in a laboratory setting. We delve into the foundational principles of quantum electrodynamics and consider interferometric aspects. Quantum radar systems, empowered by quantum measurements, extend their capabilities beyond conventional target detection and recognition, encompassing the detection and identification of RF stealth platforms and advanced weapons systems. Quantum technology is gaining paramount significance in various research domains, with the emergence of the concept of quantum radar, which leverages the quantum states of photons to extract information from distant targets. The mechanism involves dispatching photons, or photon clusters, toward the target, whereupon they are absorbed and subsequently re-emitted. The crucial measurement process can be executed in two distinct manners. One approach entails an interferometric measurement, often referred to as phase measurement, conducted on the photons, while the alternative method involves the straightforward quantification of returning photons. These methods are respectively known as Interferometric QR and Quantum Illumination (QI). In both approaches, one can opt to employ stationary quantum states of photons or harness entangled states. Extensive research has demonstrated that the use of entangled states yields the most significant resolution enhancement, achieving optimal results under ideal conditions. Quantum states offer a substantial advantage by virtue of their inherent correlations, referred to as quantum correlations, which augment both resolution and signal-to-noise ratio (SNR) in the radar system. This paper explores the intricacies of these advancements in quantum radar technology, shedding light on the underlying principles and experimental methodologies.
Quantum radar represents a promising advancement over classical radar systems by exploiting quantum mechanical phenomena such as entanglement and quantum measurement to overcome fundamental detection limitations. This paper reviews the evolution of radar technology from conventional radar frequency systems to quantum radar architectures, with emphasis on sensitivity enhancement and detection of RF-stealth targets for military defense applications. Classical radar parameters such as radar range, transmitted power and cross section are revisited and extended to their quantum analogues. The role of entangled single photon sources in improving detection performance under high noise and jamming environments is discussed. Context of microwave quantum radar is reviewed along with photonic implementations. This paper further highlights the importance of quantum measurement theory, including system-apparatus entanglement, density matrix formalism and wave function collapse in extracting information from quantum radar systems. Although significant experimental challenges remain, recent advances indicate strong potential for future development of quantum radar in next generation defense and surveillance systems.
Quantum radar serves to drastically improve the resolution of current radar technology using quantum phenomena. This paper will first review some of the proposed ideas and engineering designs behind both entanglement radar and coherent state radar design schemes. Entanglement radar is based on first entangling two photons, then sending one of the entangled photons out towards the target, and keeping the other one at home. A correlation between the two photons is analyzed to obtain information. Coherent state quantum radar relies on using coherent state photons and a quantum detection scheme in order to beat the diffraction limit. Based on the above, a proposed design concept to implement of a coherent state quantum radar is presented for simultaneously determining target range and azimuth/elevation angles.
Quantum metrology exploits quantum phenomena to improve the measurement sensitivity. Theoretical analysis shows that quantum measurement can break through the standard quantum limits and reach super sensitivity level. Quantum radar systems based on quantum measurement can fufill not only conventional target detection and recognition tasks but also capable of detecting and identifying the RF stealth platform and weapons systems. The theoretical basis, classification, physical realization of quantum radar is discussed comprehensively in this paper. And the technology state and open questions of quantum radars is reviewed at the end.
The aim of this paper is to evaluate the role of Quantum Radar in strengthening India's air defence architecture by addressing the limitations of classical radar systems against stealth and low-observable aerial threats. Air defence in the 21st century is characterised by a continuous contest between detection and evasion. While modern radars have evolved through digital beamforming, phased arrays, and frequency agility, stealth technology—through shaping, radar-absorbent coatings, and signature management—has reduced aircraft radar cross-section to unprecedented levels. For India, facing a two-front threat from technologically advanced adversaries, reliable detection of stealth aircraft, cruise missiles, and UAVs is a strategic necessity. Quantum Radar, based on Quantum Illumination principles, utilises photon entanglement and correlation to detect low-RCS targets even in high-noise and jamming environments. This paper presents a comparative evaluation of Quantum Radar with India's indigenous radar systems and examines engineering implementation prospects under the National Quantum Mission. A phased roadmap is proposed to integrate photonic and quantum sensing technologies within the Integrated Air Defence System, enabling future-ready, quantum-resilient surveillance and target acquisition capabilities for the Indian Armed Forces.