Fermiyonik sistemler için Kuantum Monte Carlo yöntemleri : sabit düğüm yakınlaştırması ötesi

Dugan, Nazım

Published Jan 1, 2010• 0 citations

Abstract

Developments are made on the quantum Monte Carlo methods towards increasing the precision and the stability of the non fixed-node projector calculations of fermions. In the first part of the developments, the wavefunction correction scheme, which was developed to increase the precision of the di usion Monte Carlo (DMC) method, is applied to non fixed-node DMC to increase the precision of such fermion calculations which do not have nodal error. The benchmark calculations indicate a significant decrease of statistical error due to the usage of the correction scheme in such non fixed-node calculations. The second part of the developments is about the modifications of the wavefunction correction scheme for having a stable non fixed-node DMC algorithm for fermions. The minus signed walkers of the non fixed-node calculations are avoided by these modifications in the developed stable algorithm. However, the accuracy of the method decreases, especially for larger systems, as a result of the discussed modifications to overcome the sign instability.

Related papers

QUANTUM MONTE CARLO SIMULATIONS OF FERMIONS: A MATHEMATICAL ANALYSIS OF THE FIXED-NODE APPROXIMATION

Eric Cancès B, Benjamin Jourdain A, Tony Lelièvre A

The Diffusion Monte Carlo (DMC) method is a powerful strategy to estimate the ground state energy E0 of an N-body Schrödinger Hamiltonian H = -½Δ + V with high accuracy. It consists of writing E0 as the long-time limit of an expectation value of a drift-diffusion process with a source term, and numerically simulating this process by means of a collection of random walkers. As for a number of stochastic methods, a DMC calculation makes use of an importance sampling function ψI which hopefully approximates some ground state ψ0 of H. In the fermionic case, it has been observed that the DMC method is biased, except in the special case when the nodal surfaces of ψI coincide with those of a ground state of H. The approximation due to the fact that, in practice, the nodal surfaces of ψI differ from those of the ground states of H, is referred to as the Fixed Node Approximation (FNA). Our purpose in this paper is to provide a mathematical analysis of the FNA. We prove that, under convenient hypotheses, a DMC calculation performed with the importance sampling function ψI, provides an estimation of the infimum of the energy 〈ψ, Hψ〉 on the set of the fermionic test functions ψ that exactly vanish on the nodal surfaces of ψI.

Mathematical Models and Methods in Applied SciencesAug 23, 200627 citations

A brief introduction to the diffusion Monte Carlo method and the fixed-node approximation

Alfonso Annarelli, Dario Alfè, Andrea Zen

Quantum Monte Carlo (QMC) methods represent a powerful family of computational techniques for tackling complex quantum many-body problems and performing calculations of stationary state properties. QMC is among the most accurate and powerful approaches to the study of electronic structure, but its application is often hindered by a steep learning curve; hence it is rarely addressed in undergraduate and postgraduate classes. This tutorial is a step toward filling this gap. We offer an introduction to the diffusion Monte Carlo (DMC) method, which aims to solve the imaginary time Schrödinger equation through stochastic sampling of the configuration space. Starting from the theoretical foundations, the discussion leads naturally to the formulation of a step-by-step algorithm. To illustrate how the method works in simplified scenarios, examples such as the harmonic oscillator and the hydrogen atom are provided. The discussion extends to the fixed-node approximation, a crucial approach for addressing the fermionic sign problem in multi-electron systems. In particular, we examine the influence of trial wave function nodal surfaces on the accuracy of DMC energy by evaluating results from a non-interacting two-fermion system. Extending the method to excited states is feasible in principle, but some additional considerations are needed, supported by practical insights. By addressing the fundamental concepts from a hands-on perspective, we hope this tutorial will serve as a valuable guide for researchers and students approaching DMC for the first time.

arXiv:2412.06006The Journal of Chemical PhysicsDec 28, 20249 citations

The fermion Monte Carlo revisited

Roland Assaraf, Michel Caffarel, Anatole Khélif

In this work we present a detailed study of the fermion Monte Carlo algorithm (FMC), a recently proposed stochastic method for calculating fermionic ground-state energies. A proof that the FMC method is an exact method is given. In this work the stability of the method is related to the difference between the lowest (bosonic-type) eigenvalue of the FMC diffusion operator and the exact Fermi energy. It is shown that within a FMC framework the lowest eigenvalue of the new diffusion operator is no longer the bosonic ground-state eigenvalue as in standard exact diffusion Monte Carlo (DMC) schemes but a modified value which is strictly greater. Accordingly, FMC can be viewed as an exact DMC method built from a correlated diffusion process having a reduced Bose–Fermi gap. As a consequence, the FMC method is more stable than any transient method (or nodal release-type approaches). It is shown that the most recent ingredient of the FMC approach (Kalos M H and Pederiva F 2000 Phys. Rev. Lett. 85 3547), namely the introduction of non-symmetric guiding functions, does not necessarily improve the stability of the algorithm. We argue that the stability observed with such guiding functions is in general a finite-size population effect disappearing for a very large population of walkers. The counterpart of this stability is a control population error which is different in nature from the standard diffusion Monte Carlo algorithm and which is at the origin of an uncontrolled approximation in FMC. We illustrate the various ideas presented in this work with calculations performed on a very simple model having only nine states but a full ‘sign problem’. Already for this toy model it is clearly seen that FMC calculations are inherently uncontrolled.

arXiv:cond-mat/0611264Journal of Physics A Mathematical and TheoreticalJan 23, 200719 citations

The quantum Monte Carlo method—electron correlation from random numbers (abstract only)

Richard J. Needs

The fixed-node diffusion quantum Monte Carlo (DMC) method is the most accurate method known for calculating the energies of large many-particle quantum systems. The key element of the method is the development of accurate trial many-body wavefunctions which control the statistical efficiency of the calculations and the accuracy obtained. Accurate wavefunctions can be obtained by building correlation effects on top of mean field descriptions such as density functional theory. The wavefunctions can be improved by introducing multi-determinants, pairing functions, and backflow transformations. The calculations are expensive, but the method scales well with system size and calculations on 1000 particles are possible. Some recent applications of the DMC method to atoms, molecules and solids will be presented.

Journal of Physics Condensed MatterJan 24, 20081 citation

Self-healing diffusion quantum Monte Carlo algorithms: Direct reduction of the fermion sign error in electronic structure calculations

Fernando Agustín Reboredo, Randolph Q. Hood, Paul R. C. Kent

We develop a formalism and present an algorithm for optimization of the trial wave function used in fixed-node diffusion quantum Monte Carlo (DMC) methods. The formalism is based on the DMC mixed estimator of the ground-state probability density. We take advantage of a basic property of the walker configuration distribution generated in a DMC calculation, to (i) project out a multideterminant expansion of the fixed-node ground-state wave function and (ii) to define a cost function that relates the fixed-node ground-state and the noninteracting trial wave functions. We show that (a) locally smoothing out the kink of the fixed-node ground-state wave function at the node generates a new trial wave function with better nodal structure and (b) we argue that the noise in the fixed-node wave function resulting from finite sampling plays a beneficial role, allowing the nodes to adjust toward the ones of the exact many-body ground state in a simulated annealing-like process. Based on these principles, we propose a method to improve both single determinant and multideterminant expansions of the trial wave function. The method can be generalized to other wave-function forms such as pfaffians. We test the method in a model system where benchmark configuration-interaction calculations can be performed and most components of the Hamiltonian are evaluated analytically. Comparing the DMC calculations with the exact solutions, we find that the trial wave function is systematically improved. The overlap of the optimized trial wave function and the exact ground state converges to 100% even starting from wave functions orthogonal to the exact ground state. Similarly, the DMC total energy and density converges to the exact solutions for the model. In the optimization process we find an optimal noninteracting nodal potential of density-functional-like form whose existence was predicted in a previous publication [Phys. Rev. B 77, 245110 (2008)]. Tests of the method are extended to a model system with a conventional Coulomb interaction where we show we can obtain the exact Kohn-Sham effective potential from the DMC data.

arXiv:0808.3417Physical Review BMay 19, 200930 citations

Quantum Monte Carlo : Reduction of time‐step error with the wave function correction method

Hae‐Won Kim, James B. Anderson

Abstract We compare the accuracy and precision of the wave function correction method to that of traditional diffusion quantum Monte Carlo (traditional DQMC) simulations. Direct calculation of corrections to trial wave functions reduces time step error for Be and Ne electronic ground state energies when compared to traditional DQMC results. The fixed‐node method is utilized for these fermionic systems, so error due to incorrect node locations is not addressed. This correction DQMC method achieves more accurate energies at larger time steps, promising decreased computational cost to reach a given accuracy. For an optimized Be trial wave function, the statistical uncertainty per unit of computational effort is also reduced relative to traditional DQMC. Correction DQMC utilizes walker feed integrals and growth factors, as reported previously. We illustrate the method in a simple harmonic oscillator example, and we report high accuracy energies for Be and Ne at several time steps.

International Journal of Quantum ChemistryNov 14, 20220 citations