This research was focused on the construction of a magneto-optical trap (MOT) to create a Bose-Einstein Condensate (BEC) of 87Rb. The BEC is the coldest of the five states of matter functioning at a minuscule temperature of nanokelvin. A BEC is as close as we can get to absolute zero. Thus making it a valuable tool for researching the fundamental physics of quantum systems. Our setup utilizes both a high pressure and low-pressure MOT. The high-pressure MOT initiates the process with a high vapor density allowing for better Rb collection. The trapped atoms are then transported to the low-pressure MOT where there are no other atoms. Rb atoms are further cooled to a Bose-Einstein condensate temperature and are moved with more current-carrying coils to the glass BEC chamber. In the BEC chamber all Rb atoms are identical at their lowest quantum state. Although the process can be phrased in a few short sentences the setup and characterization of the entire system takes months to years of construction. # 43- 46 Environmental Fellows Program: Student Practicums
This research was focused on the construction of a magneto-optical trap (MOT) to create a Bose-Einstein Condensate (BEC) of 87Rb. The BEC is the coldest of the five states of matter functioning at a minuscule temperature of nanokelvin. A BEC is as close as we can get to absolute zero. Thus making it a valuable tool for researching the fundamental physics of quantum systems. Our setup utilizes both a high pressure and low-pressure MOT. The high-pressure MOT initiates the process with a high vapor density allowing for better Rb collection. The trapped atoms are then transported to the low-pressure MOT where there are no other atoms. Rb atoms are further cooled to a Bose-Einstein condensate temperature and are moved with more current-carrying coils to the glass BEC chamber. In the BEC chamber all Rb atoms are identical at their lowest quantum state. Although the process can be phrased in a few short sentences the setup and characterization of the entire system takes months to years of construction. # 43- 46 Environmental Fellows Program: Student Practicums
In a Bose-Einstein Condensate (BEC), due to extremely low temperatures, wave functions of all particles in the system overlap and form a single macroscopic wavefunction. This brings quantum mechanical effects to the macroscopic scale and allows us to better understand known quantum mechanical laws and effects, as well as develop new ones. In addition to being of fundamental scientific interest, BEC can serve in practical applications, such as quantum metrology, atomic interferometry, and quantum information and communication. Here we describe our approach for producing BECs in 87Rb. To create atomic flux towards our science chamber, a 2-dimensional magneto-optical trap (2D-MOT) with push beam is used. The initial atomic cloud is formed in 15s by 3D-MOT and consists of 1e9 atoms at 500uK. After the MOT, atoms are cooled with optical molasses to 50uK and transferred to a quadrupole magnetic trap, where radio-frequency (RF) induced evaporation is performed, which lowers temperature to 10uK. After RF evaporation, the atomic cloud is transferred to a crossed beams optical dipole trap (ODT). During evaporation in the ODT, the temperature is reduced below the critical temperature Tc=286nK, where condensation starts, and eventually reaches 40nK. As a result, a quasi-pure BEC with 1e5 87Rb atoms is formed. The complete sequence from the MOT loading to the BEC formation takes about 30s. Observations of the inversion of the aspect ratio of the cloud during free expansion and a bimodal velocity distribution prove quantum degeneracy. Presented in this thesis are the necessary background for understanding the experimental steps, a description of the schemes and technical details of our setup, and a characterizations of all the experimental steps.
This thesis describes the design, construction and optimisation of a new apparatus to produce Bose-Einstein condensates (BECs) of 87Rb atoms. The main aim in building this system was to include a high resolution imaging system capable of resolving single atoms. Optical access for the imaging system was created by including a stage of atom transport in which the atoms are magnetically transferred ~50 cm from a magneto-optical trap (MOT), where they are initially collected, to a glass science cell where experiments are carried out and imaging takes place. Two magnetic transport schemes have been demonstrated, based on approaches first used in other laboratories. First, a scheme in which the atoms are transferred in a moving pair of magnetic trapping coils. Second, a hybrid scheme where the atoms are translated part of the distance in the moving coils, and the rest of the way by switching the current in a chain of fixed coils. This second scheme was designed to allow optical access for a high numerical aperture microscope objective to be placed immediately next to the science cell for high resolution imaging.The atoms were first collected in a large pyramid MOT which can be loaded with 3 × 10^9 atoms in a time of 20 s. Around half of these atoms – those in the |F = 1, mF = −1> magnetic substate – were then magnetically trapped prior to transport. The typical fraction of the trapped atoms transferred to the science cell was ~30% and ~18% for the moving coils and hybrid schemes respectively.Evaporative cooling was carried out on the atom cloud following transport with the moving coils and loading into a time-orbiting potential trap. The optimised cooling sequence lasted for 28 s and consistently produced a pure condensate with 5 × 10^5 atoms. A BEC has also been produced by evaporative cooling following hybrid transport. The next experimental steps will be to optimise the hybrid transfer approach further and install the high resolution imaging system.The system is well-placed to continue an ongoing series of experiments in which ultracold atoms are trapped in RF-dressed potentials. These potentials will be used to study low-dimensional quantum gases as well as in experiments where small atom number BECs are rapidly rotated to enter the fractional quantum Hall regime.
The construction of an apparatus capable of producing Bose-Einstein condensates marks a significant milestone in every experimental cold atom laboratory. In this thesis I describe the development of a system to create a Bose-Einstein condensate of 87Rb in a Time-Orbiting Potential trap.\n\nI review the optical and magnetic techniques required to trap and cool an atomic sample under vacuum, motivating our decision to build a double MOT system comprised of a high-pressure (10−9 torr) chamber to gather atoms and a low-pressure (10−11 torr) chamber to cool atoms to degeneracy.\n\nBy theoretically modeling the atom number and temperature inside the magnetic trap during evaporative cooling I demonstrate a simple approach to determining a cooling path that reaches the transition temperature. By making use of the condensates produced under these non-optimized conditions I determine the heating rate of the condensate in the TOP trap to be 300 nK/s. I further use the condensates to make a more precise measurement of the TOP trap bias field.\n\nI improve upon the conventional evaporation path used in TOP trap experiments by introducing and optimizing additional bias field compression stages in between RF evaporation ramps. I demonstrate how, by adding these additional stages, the system is capable of reaching the BEC phase transition with a final atom number of 2times105. In contrast, RF evaporation after only a single bias field ramp has yielded condensates with only 30times103 atoms.
The apparatus and procedure required to generate a pure Bose-Einstein condensate (BEC) consisting of about half a million 87Rb atoms at a temperature of <60 nK with a phase density of >54 is described. The atoms are first laser cooled in a vapour cell magneto-optical trap (MOT) and subsequently transferred to an ultra-low pressure MOT. The atoms are loaded into a QUIC trap consisting of a pair of quadrupole coils and a Ioffe coil that generates a small finite magnetic field at the trap energy minimum to suppress Majorana transitions. Evaporation induced by an RF field lowers the temperature permitting the transition to BEC to be observed by monitoring the free expansion of the atoms after the trapping fields have been switched off.PACS Nos.: 03.75.Fi, 05.30.Jp, 32.80.Pj, 64.60.i
The possibility to mould and control pure quantum systems has been offered by the experimental observation of Bose-Einstein condensation, a unique phase of matter when macroscopic quantities of a gas occupy the lowest quantum state. Techniques for creating these degenerate gases vary from laboratory to laboratory; each offers an unique test bed for studying quantum physics on a macroscopic scale. This thesis reports on the experimental design, construction and performance of an apparatus to create two-component 87Rb and 41K condensates for studies of non-equilibrium dynamics. This thesis is broken down as follows. In Chapter 1, a brief overview of the history and status of Bose Einstein condensates is presented, to affirm the motivation behind our work. Chapter 2 then presents the fundamental theory and background information to understand how and why our experiment was built. Chapter 3 describes the bulk of the work undertaken at the beginning of this thesis. In particular it describes the design choices, construction and performance of the vacuum, and laser and magnetic coil systems that are the key structural elements of the apparatus. In particular the vacuum system is a two-component differentially pumped system designed to optimise the number and lifetime of trapped atoms. Another integral element of the vacuum chamber is the science cell that enables high optical access, and close physical, access to an atomic cloud. As a result, high resolution imaging, ≃ 980 nm resolution at 780 nm is expected with a commercial microscope objective lens. The laser system is carefully de- signed to best combine and deliver the seven different optical frequencies required to simultaneously trap and manipulate 87Rb and 41K atoms. The magnetic coil system also represents an integral component of the apparatus, responsible for trapping and transferring atoms in a quadrupole field. One pair of coils is able to have their current direction reversed in order to generate bias fields. This allows access to Feshbach resonances between the two species, once they have been condensed. The second part of this thesis, Chapter 4, describes the performance of the apparatus when used to simultaneously trap 41K and 87Rb in the 3D magneto- optical trap (MOT) and produce a condensate of 87Rb atoms. In particular 1 × 109 rubidium atoms are routinely trapped in the 3D-MOT and transferred to the science chamber. In the hybrid trap the atoms are evaporatively cooled via microwave radiation, later to be used to sympathetically cool 41K, and loaded into a hybrid optical dipole and magnetic trap. At this stage ≃ 5 × 106 atoms are evaporatively cooled, by lowering the trap depth of the optical dipole beam, until a condensate of 87Rb is formed, containing 1.5 × 105 atoms. Additionally we are able to produce 3D MOTs of 41K simultaneously with the 87Rb 3D MOTs.
This work describes the design and construction of the Bose-Einstein condensation (BEC) apparatus at the University of Toronto. The aim of the experiment is to create a Bose-Einstein condensate out of a vapour cloud of 87Rb atoms using a combination of laser cooling, magnetic trapping and evaporative cooling. The design and construction of all of the constituent parts necessary for the realization of these techniques are described in this work. The apparatus consists of two magneto-optical traps (MOTs, whereby the atoms are collected from a background vapour into the first MOT, and then transferred into the second MOT, which is in a region of ultra-high vacuum (