We present an experimentally realizable microwave pulse sequence that effects a controlled-NOT (C-NOT) gate operation on a Josephson-junction-based flux qubit/resonator system with high-process fidelity. We obtained a C-NOT gate process fidelity of 0.988 (0.980) for a two-(three-)qubit/resonator system under ideal conditions and a fidelity of 0.903 for a two-qubit/resonator system under the best, currently achieved, experimental conditions. Our simulations show that this gate is a feasible first step toward multiqubit quantum-information processing with flux qubit/resonator systems.
We present an approach to realize universal two-bit quantum gates using two SQUID flux qubits. In this approach the basic unit consists of two inductively coupled SQUIDs with realistic device parameters. Quantum logical gates are implemented by applying resonant microwave pulse to the qubits. This procedure is demonstrated by realizing a controlled-NOT (CNOT) gate and the maximally entangled states of the coupled qubits through highly accurate numerical solution of the time-dependent Schrodinger equation of the system. This coupling scheme is simple and can be readily extended to many-qubit circuits required for scalable quantum information processing.
We theoretically study a circuit quantum electrodynamics (QED) architecture with current-biased flux qubits. The qubit is coupled to the transmission line resonator by a bias current originating from the current mode of the resonator. Ultrastrong coupling regime can be obtained by varying the capacitance between the qubit and the resonator. We propose a scalable design for the circuit QED with current-biased flux qubits, where the dc-SQUIDs take the role of switching the qubit-resonator coupling. An exact calculation on two-qubit coupling strength in the scalable design shows the transition from ferromagnetic to antiferromagnetic xy-type interaction.
Control architectures that reduce hardware overhead while maintaining high-fidelity operations are essential for the continued scaling of superconducting quantum processors. Here we experimentally realize a unified control architecture for fluxonium qubits, in which both transverse (
XY) and longitudinal (
Z) operations are implemented through a single flux-control channel driven by a single arbitrary waveform generator channel. This architecture imposes competing requirements on the shared control channel, which must simultaneously support low-frequency flux transmission for reset operations while strongly attenuating broadband noise near the qubit transition frequency. We address this challenge through frequency-selective cryogenic filtering together with compensated waveform synthesis that corrects the pulse distortion introduced by the filtered control line. Experimentally, this approach preserves coherence times above 100
μs while enabling active reset with approximately 98% fidelity and 20-ns single-qubit gates with fidelities exceeding 99.99%. We further demonstrate FPGA-native instruction-level waveform synthesis based on reusable pulse primitives for unified flux control. These results establish unified flux control as a scalable architecture for fluxonium qubits that reduces control hardware overhead while preserving high-fidelity operation.