Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

NONLINEAR OPTICAL TRANSVERSE EFFECTS: CW ON-RESONANCE ENHANCEMENT, CW OFF-RESONANCE INTERFERENCE RINGS, CROSSTALK, INTRACAVITY PHASE SWITCHING, SELF-DEFOCUSING IN GALLIUM-ARSENIDE BISTABLE ETALON, SELF-FOCUSING AND SELF-DEFOCUSING OPTICAL BISTABILITY, AND INSTABILITIES (SODIUM VAPOR, WAVE PROPAGATION, OPTICAL CHAOS).

Kuochou Tai

Published Jan 1, 1984• 0 citations
OpenAlex

Abstract

Nonlinear optical transverse effects, which arise from the interaction of a Gaussian beam with a nonlinear medium, are discussed. They are cw on-resonance enhancement (CORE), cw off-resonance rings, crosstalk, intracavity phase switching, self-defocusing of a bistable etalon, and thin-sample-encoding (TSE) self-lensing (i.e., self-focusing or self-defocusing) bistability and instabilities. CORE is the enhancement of the on-axis intensity of an on-resonance laser beam in a two-level medium. We report the first observation of CORE using sodium vapor. Cw off-resonance rings, resulting from a pure phase encoding or from simultaneous phase and amplitude encodings, are observed using sodium vapor. These rings have been observed many time before, but we have made the first careful comparison with numerical calculations. Parallel operation and external switching are two crucial themes for the application of bistable optical devices (BODs). For parallel operation, crosstalk between nearby BODs on the same etalon due to diffraction coupling may need to be avoided. Minimum separations needed to ensure independent operation are computed. For external switching, intracavity phase switching using a plane-wave input can switch on (or off) a BOD using an external pulse. The validity of this concept for a Gaussian input is numerically simulated. Self-defocusing effects, resulting in some interesting effects in the transverse bistable loops, are observed using a GaAs-GaAlAs bistable etalon. The results are confirmed by numerical simulations. TSE self-lensing bistability is observed using a short sodium cell and a single mirror. TSE self-lensing bistability results from an enhancement in the feedback via self-lensing of the beam. The lack of an optical resonator and the use of a thin medium make TSE setup a good candidate to study the Ikeda instability. We report the first observation of the Ikeda instability in this all-optical passive system using a cw input. Numerical simulations show a rich bifurcation sequence not yet fully studied experimentally.

Related papers

Nonlinear Optical Transverse Effects: CW On-Resonance Enhancement, CW Off-Resonance Interference Rings, Crosstalk, Intracavity Phase Switching, Self-Defocusing in Gallium - Bistable ETALON, Self-Focusing and Self-Defocusing Optical Bistability, and Instabilities

Kuochou Tai

•Jan 1, 1984•0 citations

Transverse optical bistabilities and instabilities

Martine Le Berre, Elisabeth Ressayre, Andree A. Tallet +2 more

A transverse optical bistability is defined here as a bistability that would not occur with a plane-wave input, i.e., it depends crucially upon the radial variations in the input. Such bistabilities are characterized by much more pronounced changes in transverse profiles than in total transmission. An optical cavity is not required, making such systems good candidates for continuous wave studies of delayed-feedback instabilities which require a round-trip time longer than the medium response time. Trapping bistability and diffraction-free-encoding bistability are two limiting cases of transverse optical bistabilities. Trapping bistability occurs only for a long self-focusing nonlinear medium and arises from self-trapping of a single beam with a single feedback mirror or from cross trapping of two counterpropagating beams. In the diffraction-free-encoding case, diffraction is negligible through the portion of the nonlinear medium performing the encoding, but it is significant through any remaining medium and in the free-space propagation to the mirror and back. This paper is organized as follows: The physics of transverse optical bistabilities is summarized in Section I. Theoretical models are presented in Section II. A thin-sample-encoding (TSE) rings model is defined and shown not only to predict transverse bistability but also to account for the interference rings observed to accompany TSE bistability; it also yields delayed-feedback instabilities with a rich bifurcation sequence. Transverse bistability using a short length of sodium vapor is reported under TSE and DFE conditions in Section III. Recently it was discovered that TSE bistability has been seen only when the feedback beam is displaced from the input by about one beam diameter at the sodium. It remains to be determined just how much the nonconcentric feedback assists the concentric bistability predicted by the TSE rings model. A delayed-feedback instability with a period of twice the round-trip time is also seen.

IEEE Journal of Quantum Electronics•Sep 1, 1985•18 citations

Instabilities of a Passive All-Optical System Subjected to cw Laser Light

H. M. Gibbs, Kuochou Tai, Jerome V. Moloney +4 more

A transverse optical bistability is defined here as a bistability that would not occur with a plane-wave input; it is characterized by pronounced changes in transverse profiles, but not in total transmission.1-5 In order to use transverse bistabilities to study instabilities of the type first studied by Ikeda6 for a ring cavity, one needs a medium response time τM less than the round-trip time tR between the medium and the feedback mirror. Here instabilities are studied experimentally using a short length of sodium vapor and a far-field mirror (Fig. 1).7,8 This system has advantages over previous9,10 all-optical passive systems for studying instabilities: its input is cw, permitting the study of slowly evolving waveforms; it has little sensitivity to laser frequency shifts, because it has no cavity; its optical nonlinearity arises from a vapor of one-electron atoms, giving hope for a detailed quantitative comparison of experiments and calculations.

International Meeting on Instabilities and Dynamics of Lasers and Nonlinear Optical Systems•Jan 1, 1985•0 citations

Transverse Optical Bistability and Instabilities

H. M. Gibbs, Matthew W. Derstine, Kuochou Tai +4 more

A transverse optical bistability would not occur with a plane-wave input; it is characterized by pronounced changes in transverse profiles, but not in total transmission.1 The systems studied here consist of a single feedback mirror and a nonlinear medium (Na vapor) sufficiently thin that diffraction is negligible during the nonlinear radially dependent phase encoding. With the input focused beyond (before) the Na and the mirror center of curvature on the input (output) side of the Na, self-defocusing (self-focusing) optical bistability is seen--but only when the feedback is nonconcentric, i.e., the feedback beam is displaced off-axis relative to the input beam. If cylindrical lenses are used to form an elongated focus in the Na, bistability is still seen. This suggests that one-transverse-dimension (ID) theories may be adequate to describe the system's steady-state and transient behavior. ID numerical simulations with nonconcentric feedback are under way.

Topical Meeting on Optical Bistability (OB)•Jan 1, 1985•0 citations

Self-Defocusing and Optical Crosstalk in a Bistable Optical Etalon

Kuochou Tai, H. M. Gibbs, Jerome V. Moloney +3 more

Self-focusing effects in optical bistable hysteresis loops have been observed in a GaAs-GaAlAs superlattice.1 Experimentally, one sees drastic overshooting in the hysteresis loops and changes in the output profile as the imaging lens is translated along the propagation direction, thus imaging different object planes onto a fixed image plane (i.e. aperture). Nearly identical results are found by a one-transverse-dimension numerical simulation of good-cavity bistability in which the output is free-space propagated backwards in space, corresponding to the movement of the imaging lens. These effects arise from a radially-dependent phase shift caused by the excitonic nonlinear refraction and a gaussian beam profile.

Topical Meeting on Optical Bistability (OB)•Jan 1, 1983•1 citation

Free-Space Diffraction Effects in AN all Optical Passive Driven System

Darlena J. Jones

Transverse effects are known to play a central role in nonlinear-optical systems.Since experiments are generally performed with lasers with finite transverse dimensions, the transverse nature of the field must be considered.Experimental evidence, for example, indicates that mechanisms in the form of diffusive and diffractive coupling within the medium, free-space diffraction, or some combination of these, can create transverse structures which are important in optical bistability and self-focusing/defocusing.In particular, transverse coupling is attributed to such phenomena as radial dependence of the switch up times of bistable loops, spatial hysteresis, and the formation of solitary waves in passive systems.The dynamical effects of free-space diffraction in a unidirectional ring cavity containing a thin resonant absorber driven by an external coherent signal is considered.Minimal focusing effects exist in this system by incorporating a thin medium whose width is small compared to the cavity length and Raleigh range.There is no restriction on the medium response time relative to the round trip time; i.e. the time-dependent polarization is not adiabatically eliminated from the equations of motion.Free-space diffraction effects are isolated and diffraction and diffusive coupling within the medium is negligible.In this model where free-space diffraction is the dominant mechanism for changing the field profile in the system, shifting, deformation, and radial variation of the bistable loop and spatial hysteresis is attributed to an inherent dispersion induced by the free-space diffraction.

•Jan 1, 1993•0 citations
Nonlinear optical transverse effects, which arise from the interaction of a Gaussian beam with a nonlinear medium, are discussed. They are cw on-resonance enhancement (CORE), cw off-resonance rings, crosstalk, intracavity phase switching, self-defocusing of a bistable etalon, and thin-sample-encoding (TSE) self-lensing (i.e., self-focusing or self-defocusing) bistability and instabilities. CORE is the enhancement of the on-axis intensity of an on-resonance laser beam in a two-level medium. We report the first observation of CORE using sodium vapor. Cw off-resonance rings, resulting from a pure phase encoding or from simultaneous phase and amplitude encodings, are observed using sodium vapor. These rings have been observed many time before, but we have made the first careful comparison with numerical calculations. Parallel operation and external switching are two crucial themes for the application of bistable optical devices (BODs). For parallel operation, crosstalk between nearby BODs on the same etalon due to diffraction coupling may need to be avoided. Minimum separations needed to ensure independent operation are computed. For external switching, intracavity phase switching using a plane-wave input can switch on (or off) a BOD using an external pulse. The validity of this concept for a Gaussian input is numerically simulated. Self-defocusing effects, resulting in some interesting effects in the transverse bistable loops, are observed using a GaAs-GaAlAs bistable etalon. The results are confirmed by numerical simulations. TSE self-lensing bistability is observed using a short sodium cell and a single mirror. TSE self-lensing bistability results from an enhancement in the feedback via self-lensing of the beam. The lack of an optical resonator and the use of a thin medium make TSE setup a good candidate to study the Ikeda instability. We report the first observation of the Ikeda instability in this all-optical passive system using a cw input. Numerical simulations show a rich bifurcation sequence not yet fully studied experimentally.
A transverse optical bistability is defined here as a bistability that would not occur with a plane-wave input, i.e., it depends crucially upon the radial variations in the input. Such bistabilities are characterized by much more pronounced changes in transverse profiles than in total transmission. An optical cavity is not required, making such systems good candidates for continuous wave studies of delayed-feedback instabilities which require a round-trip time longer than the medium response time. Trapping bistability and diffraction-free-encoding bistability are two limiting cases of transverse optical bistabilities. Trapping bistability occurs only for a long self-focusing nonlinear medium and arises from self-trapping of a single beam with a single feedback mirror or from cross trapping of two counterpropagating beams. In the diffraction-free-encoding case, diffraction is negligible through the portion of the nonlinear medium performing the encoding, but it is significant through any remaining medium and in the free-space propagation to the mirror and back. This paper is organized as follows: The physics of transverse optical bistabilities is summarized in Section I. Theoretical models are presented in Section II. A thin-sample-encoding (TSE) rings model is defined and shown not only to predict transverse bistability but also to account for the interference rings observed to accompany TSE bistability; it also yields delayed-feedback instabilities with a rich bifurcation sequence. Transverse bistability using a short length of sodium vapor is reported under TSE and DFE conditions in Section III. Recently it was discovered that TSE bistability has been seen only when the feedback beam is displaced from the input by about one beam diameter at the sodium. It remains to be determined just how much the nonconcentric feedback assists the concentric bistability predicted by the TSE rings model. A delayed-feedback instability with a period of twice the round-trip time is also seen.
A transverse optical bistability is defined here as a bistability that would not occur with a plane-wave input; it is characterized by pronounced changes in transverse profiles, but not in total transmission.1-5 In order to use transverse bistabilities to study instabilities of the type first studied by Ikeda6 for a ring cavity, one needs a medium response time τM less than the round-trip time tR between the medium and the feedback mirror. Here instabilities are studied experimentally using a short length of sodium vapor and a far-field mirror (Fig. 1).7,8 This system has advantages over previous9,10 all-optical passive systems for studying instabilities: its input is cw, permitting the study of slowly evolving waveforms; it has little sensitivity to laser frequency shifts, because it has no cavity; its optical nonlinearity arises from a vapor of one-electron atoms, giving hope for a detailed quantitative comparison of experiments and calculations.
A transverse optical bistability would not occur with a plane-wave input; it is characterized by pronounced changes in transverse profiles, but not in total transmission.1 The systems studied here consist of a single feedback mirror and a nonlinear medium (Na vapor) sufficiently thin that diffraction is negligible during the nonlinear radially dependent phase encoding. With the input focused beyond (before) the Na and the mirror center of curvature on the input (output) side of the Na, self-defocusing (self-focusing) optical bistability is seen--but only when the feedback is nonconcentric, i.e., the feedback beam is displaced off-axis relative to the input beam. If cylindrical lenses are used to form an elongated focus in the Na, bistability is still seen. This suggests that one-transverse-dimension (ID) theories may be adequate to describe the system's steady-state and transient behavior. ID numerical simulations with nonconcentric feedback are under way.
Self-focusing effects in optical bistable hysteresis loops have been observed in a GaAs-GaAlAs superlattice.1 Experimentally, one sees drastic overshooting in the hysteresis loops and changes in the output profile as the imaging lens is translated along the propagation direction, thus imaging different object planes onto a fixed image plane (i.e. aperture). Nearly identical results are found by a one-transverse-dimension numerical simulation of good-cavity bistability in which the output is free-space propagated backwards in space, corresponding to the movement of the imaging lens. These effects arise from a radially-dependent phase shift caused by the excitonic nonlinear refraction and a gaussian beam profile.
Transverse effects are known to play a central role in nonlinear-optical systems.Since experiments are generally performed with lasers with finite transverse dimensions, the transverse nature of the field must be considered.Experimental evidence, for example, indicates that mechanisms in the form of diffusive and diffractive coupling within the medium, free-space diffraction, or some combination of these, can create transverse structures which are important in optical bistability and self-focusing/defocusing.In particular, transverse coupling is attributed to such phenomena as radial dependence of the switch up times of bistable loops, spatial hysteresis, and the formation of solitary waves in passive systems.The dynamical effects of free-space diffraction in a unidirectional ring cavity containing a thin resonant absorber driven by an external coherent signal is considered.Minimal focusing effects exist in this system by incorporating a thin medium whose width is small compared to the cavity length and Raleigh range.There is no restriction on the medium response time relative to the round trip time; i.e. the time-dependent polarization is not adiabatically eliminated from the equations of motion.Free-space diffraction effects are isolated and diffraction and diffusive coupling within the medium is negligible.In this model where free-space diffraction is the dominant mechanism for changing the field profile in the system, shifting, deformation, and radial variation of the bistable loop and spatial hysteresis is attributed to an inherent dispersion induced by the free-space diffraction.